NBS Source
I'm a manufacturer
Compare variants

Flowfresh SR

Verified by manufacturer over a year ago

Flowfresh SR - Semi Gloss (Satin)

Flowcrete Variant:
Third party certifications:
  • AWTA Test results

    Certificate type

  • HACCP International Product Compliance Certification

    HACCP International Product Compliance Certification

    Certificate type

Antimicrobial cementitious polyurethane resin floor system

Jump to:
1800 318 038 Website

Application

Typically used in heavy-duty processing areas, food preparation zones.

Description

A heavy-duty, antimicrobial polyurethane resin floor system offering anti-slip and chemical resistant finish.


  • Antimicrobial polyturethane resin floor system containing Polygiene® silver-ion based additive that kills up to 99.9% bacteria.
  • Thermal resistant and freeze/thaw resistant.
  • Impressive anti-slip profile in dry and wet conditions.
  • Easy to clean.
  • Protects against attack from corrosive ingredients and cleaning agents.

General information

Finish

Anti-microbial.

Anti-slip.

Material

Polyurethane

Warranty description

-

Manufacturer guidance

Check with manufacturer for details.

Uniclass

Ss_30_42_54_75 Resin flooring systemsPrimary

NATSPEC National Classification System

0657 Resin Based Seamless Flooring

SpecPack

03360 Concrete Finishes

SpeedSpec

03365 Concrete Finishes

Product range

Antimicrobial Cementitious Polyurethane Flooring

Specification data - Resin flooring systems

Substrate preparation

-

Manufacturer guidance

Concrete should be finished by steel trowel. Surface preparation is to be completed by totally enclosed light shot blasting (please note this may leave track and blast lines that will not be covered) or diamond grinding to a minimum CSP4 prior to any coating application. For proper methods, refer to ICRI’s Technical Guideline No.03732. Any damaged areas must be repaired with Flowtex F1 mortar.

Standard

To AS/ISO 9239.1 and AS 4586.

Primer

Flowfresh Coating.

Manufacturer guidance

Primer is only required for porous substrates. For coating application and instruction, to follow manufacturer's technical data sheet.

Resin coating

Flowfresh SL.

Manufacturer guidance

For coating application and instruction . To follow manufacturer's technical data sheet.

Aggregate

Full Broadcast Quartz Scatter.

Guidance for specification option:

Application based on 0.6 - 1.0mm Aggregate. Check with the manufacturer's technical data sheet.

Sealer coat

Flowfresh Coating Satin.

Manufacturer guidance

For coating application and instruction, to follow manufacturer's technical data sheet.

Colours

Bluebell.

Bridge Grey.

Dark Grey.

Light Grey Blue.

Light Grey.

Show more

Finish:

Semi Gloss (Satin).

NominalThickness

4 mm.

6 mm.

9 mm.

Slip resistance

P5 (Based on 0.6mm-1.0mm Aggregate).

Manufacturer guidance

Slip resistance method described in AS 4586.

Coving

-

Manufacturer guidance

Coving can form an integral part of the flooring system, creating a sealed finish between the floor and wall joint. To refer to Flowtex F1 Coving Mortar for further information.

Curing time

Foot Traffic 24 h @ 20˚C.

Vehicular Traffic 48 h @ 20˚C.

Full Chemical Cure 7 d @ 20˚C.

Manufacturer guidance

Cure time depends on the ambient temperature. Check and

verify with the manufacturer.

Fire performance

Tested to AS/ISO 9239.1

Fire resistance

10 kW/m².

Guidance for specification option:

Critical Heat Flux value.

69% (Mean).

Guidance for specification option:

Smoke value.

Manufacturer guidance

Tested to AS/ISO 9239.1

VOC content

Less than 140 g/L.

Manufacturer guidance

Compliant with Green StarDesign & As Built V1.2-13.1.1B,Green Star Interiors V1.2-12.1.1B.

Sustainability data

Country of product manufacture

Australia

Third party certifications

AWTA Test results

AWTA Test results

Flowfresh SR AWTA Fire Test

HACCP International Product Compliance Certification

HACCP International Product Compliance Certification

HACCP International Certification

Literature

Flowfresh Brochure

Flowfresh Brochure

Flowfresh SR 4mm Gloss

Flowfresh SR 4mm Gloss

Flowfresh SR 4mm Matte

Flowfresh SR 4mm Matte

Flowfresh SR 4mm Satin

Flowfresh SR 4mm Satin

Flowfresh SR 6mm Gloss

Flowfresh SR 6mm Gloss

Flowfresh SR 6mm Matte

Flowfresh SR 6mm Matte

Flowfresh SR 6mm Satin

Flowfresh SR 6mm Satin

Flowfresh SR 9mm Satin

Flowfresh SR 9mm Satin

Aluminium Arrowhead - Cove to Floor Detail [Above]

Aluminium Arrowhead - Cove to Floor Detail [Above]

Aluminium Arrowhead - Cove to Floor Detail [Below]

Aluminium Arrowhead - Cove to Floor Detail [Below]

Flowfresh Termination Detail to Existing Flooring

Flowfresh Termination Detail to Existing Flooring

Case studies

Fresh Floor Finish for Orchard Manufacturing

Fresh Floor Finish for Orchard Manufacturing

Flowcrete Australia Works Wonders at Swinburne University Workshop

Flowcrete Australia Works Wonders at Swinburne University Workshop

Similar products from Flowcrete

Deckcoat EP

Deckcoat EP

Deckshield ED Rapide

Deckshield ED Rapide

Flowcoat OP

Flowcoat OP

Flowcoat Terrosso

Flowcoat Terrosso

Flowshield ESD SL

Flowshield ESD SL