Maxicap Elastomeric Paint

Suitable for applications that require a superior level of protection, such as high rise buildings, commercial buildings and areas of high coastal exposure. Recommended surfaces include properly prepared substrates and surfaces including brick, block, cement render and off-form concrete.

Baxta Engineered Coatings produce a range of products that are specifically developed to work in combination to match different substrates. Maxicap Elastomeric Paint should be used in accordance with the following specific Baxta installation requirements:

For soffits and walls derived from off-form concrete, tilt panel, render (can be smooth or stipple finish):

• 1st coat: Baxta Concrete Patch.
• 2nd coat: Baxta Solvent Surface Primer.
• 3rd coat: Baxta Maxicap Elastomeric.
• 4th coat: Baxta Maxicap Elastomeric.

For soffits and walls derived from off-form concrete and tilt panel (sponge finish):

• 1st coat: Baxta Concrete Patch.
• 2nd coat: Baxta Key Coat.
• 3rd coat: Baxta Screeded Level Render.
• 4th coat: Baxta Maxicap Elastomeric.
• 5th coat: Baxta Maxicap Elastomeric.

For walls with brick and masonry block render:

• 1st coat: Baxta Screeded Level Render. 
• 2nd coat: Baxta CovaCoat Primer.
• 3rd coat: Baxta Maxicap Elastometric.  
• 4th coat: Baxta Maxicap Elastometric.

For walls with off-form concrete and tilt panel:

• 1st coat: Baxta Key Coat.
• 2nd coat: Baxta Screeded Level Render.
• 3rd coat: Baxta CovaCoat Primer.
• 4th coat: Baxta Maxicap Elastomeric.
• 5th coat: Baxta Maxicap Elastomeric.

For walls with fibre cement sheeting, off-form concrete, tilt panel, brick and masonry render:

• 1st coat: Baxta Flexible Mineral Polymer.
• 2nd coat: Baxta CovaCoat Primer.
• 3rd coat: Baxta Maxicap Elastomeric.
• 4th coat: Baxta Maxicap Elastomeric.