NBS Source
I'm a manufacturer

Kerapoxy® 410 - Water-Cleanable, Epoxy Bond Coat

Verified by manufacturer 9 months ago

Mapei Inc. Third party certifications:
  • SCS Indoor Advantage™ Gold

    SCS Indoor Advantage™ Gold

    Certificate type

Premium 100%-Solids Epoxy Setting Mortar

Jump to:
800 361 9309 Website

Application

• Most interior/exterior residential, commercial, industrial and institutional installations on floors and walls where high mortar strength is required

 • Installation of ceramic and porcelain tile, quarry tile, pavers, Saltillo tile, and most types of marble, granite and natural stone 

• For setting most moisture-sensitive marble, stone and agglomerates Note: Marble and granite are products of nature made from a vast combination of minerals and chemicals that may cause the material to behave or react in a manner beyond our control. Therefore, determine the suitability of all the materials before proceeding with the installation and test materials for possible staining and discoloration.

 • For setting ceramic tile and acid-resistant floor brick and for installations requiring acid and chemical resistance

 • For use over most dry, clean TCNA-approved substrates

Description

Kerapoxy 410 is a two-component, solvent-free, 100%-solids epoxy setting floor and wall mortar that is suited for areas where the most chemical-resistant setting material is necessary. It also has high compressive strength, which provides excellent impact strength in commercial facilities. Kerapoxy 410 is designed for setting most types of tile and stone


• ISO 13007: Classification R2

• ANSI: Meets ANSI A118.3 industry standards

LEED v4 Points Contribution LEED Points

General information

CMS

09 30 00 TilingPrimary

Specification data - Tiling

Third party certifications

SCS Indoor Advantage™ Gold

SCS Indoor Advantage™ Gold

Indoor Advantage™ Gold SCS-IAQ-06042

Literature

Tile & Stone Installation Systems

Tile & Stone Installation Systems

Kerapoxy® 410

Kerapoxy® 410

Glass tile installation solutions

Glass tile installation solutions

Similar products from Mapei Inc.

4 to 1™ Mud Bed Mix - Thick-Bed (Dry-Pack) Mortar

4 to 1™ Mud Bed Mix - Thick-Bed (Dry-Pack) Mortar

Adesilex™ P10  - Modified Dry-Set Cement Mortar

Adesilex™ P10 - Modified Dry-Set Cement Mortar

ECO Prim Grip™ - Multipurpose Bond-Promoting Primer

ECO Prim Grip™ - Multipurpose Bond-Promoting Primer

Flexcolor 3D - Polymer Ready-to-Use Specialty Grout

Flexcolor 3D - Polymer Ready-to-Use Specialty Grout

Flexcolor CQ  - Polymer Ready-to-Use Specialty Grout

Flexcolor CQ - Polymer Ready-to-Use Specialty Grout

Granirapid® System - Improved Modified Dry-Set Cement Mortar

Granirapid® System - Improved Modified Dry-Set Cement Mortar

HM Primer - Sheet Membrane Primer

HM Primer - Sheet Membrane Primer

Kerabond / Keralastic™ System - Improved Modified Dry-Set Cement Mortar

Kerabond / Keralastic™ System - Improved Modified Dry-Set Cement Mortar

Kerabond T / Keralastic™ System  - Improved Modified Dry-Set Cement Mortar

Kerabond T / Keralastic™ System - Improved Modified Dry-Set Cement Mortar

Keraflex Plus - Modified Dry-Set Cement Mortar

Keraflex Plus - Modified Dry-Set Cement Mortar