Verified by manufacturer 9 months ago
SCS Indoor Advantage™ Gold
Certificate type
Premium, Rapid-Drying, Waterproofing and Crack- Isolation Membrane
• Interior/exterior floors, walls, countertops and ceilings of residential (homes, apartments and condominiums), commercial (airports, malls, office buildings, restaurants, fountains and pools) and industrial (dairies, breweries and food-processing plants) applications
• Shower pans, showers, tub and shower surrounds; bathrooms; kitchens; food prep, dishwashing, hospitality, servery and cafeteria areas; countertops; and laundry rooms
• Submerged applications such as swimming pools, spas, fountains and water features (completely covered by ceramic tile)
• Ideal for multi-family or multi-story building where
high-quality waterproofing is imperative to prevent
water damage in rooms adjacent or below
• Cantilevered balconies and decks over unoccupied
space (see the “Limitations” section below)
• Balconies, decks and terraces over occupied space
when used in conjunction with a primary waterproofing
membrane
• Steam rooms and steam showers (refer to TCNA
Handbook’s sections SR613 and SR614 or TTMAC
319SR and 321SR).
• Meets ASTM E96, Procedure E, for a low-perm waterproofing membrane
• In-plane crack isolation up to 1/8" (3 mm)
• Interior/exterior building facades
• MAPEI’s Reinforcing Fabric is available but is optional
for use on coves, corners and field applications.
Mapelastic Turbo is a two-component, rapid-drying, cementitious-binder-based membrane with fine-grained selected aggregates, special admixtures and synthetic polymers in water dispersion for interior and exterior installations under ceramic tile or stone in residential, commercial and industrial intermittent wet or submerged environments. Applied easily with a roller or brush, Mapelastic Turbo provides an excellent barrier to protect adjacent rooms and floors below from water damage. Mapelastic Turbo exceeds ANSI A118.10 and ANSI A118.12 standards and is compatible with polymer-modified cement-based mortars (ANSI A118.4 or better) or epoxy mortars (ANSI A118.3).
• ANSI: Exceeds A118.10 standard (Waterproofing Membranes for Thin-Set Ceramic Tile) and A118.12 high-performance standard (Crack-Isolation Membranes for Thin-Set Ceramic Tile)
• ASTM: C627 (Robinson) service rating for “Extra Heavy”
• ASTM: E96; Procedure E – Desiccant Method at 100°F (38°C). Meeting requirements of < 0.5 perms.
• IAPMO-listed for shower pan liners
• IAPMO File #3996
• ICC Evaluation Service Report ESR 3474
4 to 1™ Mud Bed Mix - Thick-Bed (Dry-Pack) Mortar
Adesilex™ P10 - Modified Dry-Set Cement Mortar
ECO Prim Grip™ - Multipurpose Bond-Promoting Primer
Flexcolor 3D - Polymer Ready-to-Use Specialty Grout
Flexcolor CQ - Polymer Ready-to-Use Specialty Grout
Granirapid® System - Improved Modified Dry-Set Cement Mortar
HM Primer - Sheet Membrane Primer
Kerabond / Keralastic™ System - Improved Modified Dry-Set Cement Mortar
Kerabond T / Keralastic™ System - Improved Modified Dry-Set Cement Mortar
Keraflex Plus - Modified Dry-Set Cement Mortar