NBS Source
I'm a manufacturer

Highest image stability due to system for eliminating low-frequency vibrations on high-performance 3D projectors

OVERVIEW

In an opera production a 3D HDD projector was supposed to project images onto the stage during performances. Standing as it did on a trolley, which was to be moved over a tiled floor, the projector was virtually unusable. The problem was solved by combining an increase in the projector frame to 10 kg with the assembly of pneumatic levelling mounts PLM-1 from ACE. PLM is located in the low-frequency range and is primarily used when measuring tables, test equipment and high-performance machines need to be perfectly isolated.

No featured products in this case study

Contact ACE Fabreeka UK by clicking the button below to find out which products were used in this case study.

More inspiration from ACE Fabreeka UK

View inspiration
Decoupling of Production Machines

Decoupling of Production Machines

Maximum ambient vibration isolation for sensitive glass measuring tables through automatic air spring elements

Maximum ambient vibration isolation for sensitive glass measuring tables through automatic air spring elements

Individual vibration damping for complex pump test stands through low-frequency air spring systems

Individual vibration damping for complex pump test stands through low-frequency air spring systems

“Bad vibrations“ eliminated with VibroChecker

“Bad vibrations“ eliminated with VibroChecker