Riverstone Slate Ridge is an overlap ridge system that uses real slates chemically and mechanically bonded to a glass reinforced plastic (GRP) waterproofing layer. The distinct, invisible RidgeFix fixing method easily and permanently fixes the ridge into position. The Riverstone Slate Ridge system does not require an additional roll-out ridge fixing kit, offering a considerable saving in materials and labour.

Each ridge comes pre-drilled and complete with two special RidgeFix stainless steel hardened retaining screws with high grade nitrile washers - two RidgeFix screws must be used to fix one ridge. The position of the fixing holes allows Riverstone Slate Ridge to be fixed either into a ridge runner batten or into the top of the high-level roofing batten. The ridge can be easily cut and drilled on-site to fit many different applications or requirements. The highly versatile system includes ridge/ hip tiles, block ends, hip ends/ starters and special ridge caps.

Features and benefits:

Does not require an additional roll-out ridge fixing kit.
Standard variations come in two basic sizes: 145 mm wings (for smaller roofs) and 185 mm wings.
Both sizes can be ordered in four basic angles of 90°/ 105°/ 120°/ 135° and special order of 150°.
Products available: Ridge/ hip tile, ridge cap, block end and hip end.

Dry fixing ridges - BIM objects