NBS Source
I'm a manufacturer

Compare variants

 DEVIreg™ 330 Controller - Electronic Thermostat - UFH
 DEVIreg™ 330 Controller - Electronic Thermostat - UFH
 DEVIreg™ 330 Controller - Electronic Thermostat - UFH

Verified 4 months ago

Danfoss Ltd

DEVIreg™ 330 (-10 to +10°C) - 140F1070

Verified 4 months ago

Danfoss Ltd

DEVIreg™ 330 (5–45°C) - 140F1072

Verified 4 months ago

Danfoss Ltd

DEVIreg™ 330 (60–160°C) - 140F1073

Summary
Electronic thermostat with IP20 protection, for coldstore applications.
Electronic thermostat with IP20 protection, for coldstore applications.
Electronic thermostat with IP20 protection, for coldstore applications.
Application

Can be installed in electric cabinets with DIN rail attachment.

  • DEVIreg™ 330 (-10 to +10°C) is used primarily for controlling a lower temperature range such as frost protection. This thermostat has a button to adjust the temperature setting with a scale from -10 °C to +10 °C. Special outdoor white wire sensor included in the set.
  • DEVIreg™ 330 (5–45°C) is used primarily for controlling lower temperature range such as frost protection and for cooling, comfort floor heating, total (direct) floor heating, ice and snow melting on ground, frost protection on roofs, pipe tracing, etc. The thermostat has a button to adjust the temperature setting with a scale from 5–45°C. This type has temperature lowering in economy periods mode by using external timer.
  • DEVIreg™ 330 (60–160°C) is used primarily for high temperature maintenance in pipe heating systems. The thermostat has a button to adjust the temperature setting with a scale from 60–160 °C. Special high temperature silicon wire sensor in the set.

Can be installed in electric cabinets with DIN rail attachment.

  • DEVIreg™ 330 (-10 to +10°C) is used primarily for controlling a lower temperature range such as frost protection. This thermostat has a button to adjust the temperature setting with a scale from -10 °C to +10 °C. Special outdoor white wire sensor included in the set.
  • DEVIreg™ 330 (5–45°C) is used primarily for controlling lower temperature range such as frost protection and for cooling, comfort floor heating, total (direct) floor heating, ice and snow melting on ground, frost protection on roofs, pipe tracing, etc. The thermostat has a button to adjust the temperature setting with a scale from 5–45°C. This type has temperature lowering in economy periods mode by using external timer.
  • DEVIreg™ 330 (60–160°C) is used primarily for high temperature maintenance in pipe heating systems. The thermostat has a button to adjust the temperature setting with a scale from 60–160 °C. Special high temperature silicon wire sensor in the set.

Can be installed in electric cabinets with DIN rail attachment.

  • DEVIreg™ 330 (-10 to +10°C) is used primarily for controlling a lower temperature range such as frost protection. This thermostat has a button to adjust the temperature setting with a scale from -10 °C to +10 °C. Special outdoor white wire sensor included in the set.
  • DEVIreg™ 330 (5–45°C) is used primarily for controlling lower temperature range such as frost protection and for cooling, comfort floor heating, total (direct) floor heating, ice and snow melting on ground, frost protection on roofs, pipe tracing, etc. The thermostat has a button to adjust the temperature setting with a scale from 5–45°C. This type has temperature lowering in economy periods mode by using external timer.
  • DEVIreg™ 330 (60–160°C) is used primarily for high temperature maintenance in pipe heating systems. The thermostat has a button to adjust the temperature setting with a scale from 60–160 °C. Special high temperature silicon wire sensor in the set.
Description

Electronic thermostat with IP20 protection, provided with a wire sensor to measure and control the desired temperature.

Features and benefits:

  • DIN rail attachment.
  • Low temperature area.
  • Low standby consumption.
  • LED indicator.
  • The thermostat has relay with two contact pairs - NO (normally opened) and NC (normally closed). Additionally, NO and NC contact pairs are not wetted by a voltage source inside thermostat, and can be used for control systems with any voltage up to 250 V.
  • Three temperature ranges available.
  • Compliant with EN/IEC 60730-1 (general) and EN/IEC 60730-2-9 (thermostat).

Please note the thermostat must be installed via an all-pole disconnection switch.

Electronic thermostat with IP20 protection, provided with a wire sensor to measure and control the desired temperature.

Features and benefits:

  • DIN rail attachment.
  • Low temperature area.
  • Low standby consumption.
  • LED indicator.
  • The thermostat has relay with two contact pairs - NO (normally opened) and NC (normally closed). Additionally, NO and NC contact pairs are not wetted by a voltage source inside thermostat, and can be used for control systems with any voltage up to 250 V.
  • Three temperature ranges available.
  • Compliant with EN/IEC 60730-1 (general) and EN/IEC 60730-2-9 (thermostat).

Please note the thermostat must be installed via an all-pole disconnection switch.

Electronic thermostat with IP20 protection, provided with a wire sensor to measure and control the desired temperature.

Features and benefits:

  • DIN rail attachment.
  • Low temperature area.
  • Low standby consumption.
  • LED indicator.
  • The thermostat has relay with two contact pairs - NO (normally opened) and NC (normally closed). Additionally, NO and NC contact pairs are not wetted by a voltage source inside thermostat, and can be used for control systems with any voltage up to 250 V.
  • Three temperature ranges available.
  • Compliant with EN/IEC 60730-1 (general) and EN/IEC 60730-2-9 (thermostat).

Please note the thermostat must be installed via an all-pole disconnection switch.

Digital objects
Color
White
White
White
Shape
Rectangle
Rectangle
Rectangle
Length
58 mm
58 mm
58 mm
Width
36 mm
36 mm
36 mm
Height
85 mm
85 mm
85 mm
Warranty description
Two year
Two year
Two year
SKU Code
140F1070, 140F1072,140F1073
140F1070, 140F1072,140F1073
140F1070, 140F1072,140F1073

Specification

Classification data
Standards
To BS EN 60730-1 and BS EN IEC 60730-2-9.
To BS EN 60730-1 and BS EN IEC 60730-2-9.
To BS EN 60730-1 and BS EN IEC 60730-2-9.
Application
Ambient air and surface.
Ambient air and surface.
Ambient air and surface.
Temperature range
-
-
-
Set points
Adjustable.
Adjustable.
Adjustable.
Control range
-10 to +10°C.
5–45 °C.
60–160°C.
Switch arrangement
-
-
-
Current rating
16 A.
16 A.
16 A.
Voltage rating
230 V a.c.
230 V a.c.
230 V a.c.
Enclosure
-
-
-
Ingress protection (minimum)
IP20.
IP20.
IP20.
Exposure limits
-10 to +50°C.
-10 to +50°C.
-10 to +50°C.
Visual indication
'Heating On' LED. 'Standby' LED.
'Heating On' LED. 'Standby' LED.
'Heating On' LED. 'Standby' LED.
Mounting type
Cabinet with DIN rail attachment., Cabinet with separate DIN attachment.
Cabinet with DIN rail attachment., Cabinet with separate DIN attachment.
Cabinet with DIN rail attachment., Cabinet with separate DIN attachment.
Features
Wire sensor included to control the desired temperature.
Wire sensor included to control the desired temperature.
Wire sensor included to control the desired temperature.
Accessories
Not required., 140F1095 - Room sensor, 426-frame., 140F1096 - Outdoor sensor IP44., 140F1091 - Sensor cable 3 m, 15 kOhm, Santropene., 140F1098 - Temperature sensor 10 m, NTC 15k Santropene., 19121445 - Sensor cable 40 m, 15 kOhm, Santropene., 140F1092 - Outdoor sensor 2.5 m, 15 kOhm, PVC., 140F1097 - Silicon temperature sensor, 16.1 kOhm.
Not required., 140F1095 - Room sensor, 426-frame., 140F1096 - Outdoor sensor IP44., 140F1091 - Sensor cable 3 m, 15 kOhm, Santropene., 140F1098 - Temperature sensor 10 m, NTC 15k Santropene., 19121445 - Sensor cable 40 m, 15 kOhm, Santropene., 140F1092 - Outdoor sensor 2.5 m, 15 kOhm, PVC., 140F1097 - Silicon temperature sensor, 16.1 kOhm.
Not required., 140F1095 - Room sensor, 426-frame., 140F1096 - Outdoor sensor IP44., 140F1091 - Sensor cable 3 m, 15 kOhm, Santropene., 140F1098 - Temperature sensor 10 m, NTC 15k Santropene., 19121445 - Sensor cable 40 m, 15 kOhm, Santropene., 140F1092 - Outdoor sensor 2.5 m, 15 kOhm, PVC., 140F1097 - Silicon temperature sensor, 16.1 kOhm.

Additional properties

Standby power
0.25 W (maximum).
0.25 W (maximum).
0.25 W (maximum).
TemperatureSensorType
NTC 15 kOhm at 25°C.
NTC 15 kOhm at 25°C.
NTC 16.1 kOhm at 100°C.
Protection class
Class II.
Class II.
Class II.
Weight
83 g.
83 g.
83 g.

Sustainability data

Country of product manufacture
Denmark
Denmark
Denmark
Recyclability
Recyclable at end of useful life
Recyclable at end of useful life
Recyclable at end of useful life