Summary
Multipoint lock, self-locking, electric coupling, panic C.
Multipoint lock, self-locking, electric coupling, panic C.
Multipoint lock, self-locking, electric coupling, panic C.
Application
For main and side entrance doors with electrically controlled lever handle operation in residential and commercial buildings.
For main and side entrance doors with electrically controlled lever handle operation in residential and commercial buildings.
For main and side entrance doors with electrically controlled lever handle operation in residential and commercial buildings.
Description
Multipoint lock, self-locking, electric coupling, panic C. The panic C function with split lock follower and separated lever handle control (outside/inside) offers the ideal combination of access control and escape route. Access is controlled via an identification system (e.g. badge) or the cylinder.
Note: The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder. Do not use a reduction sleeve for the Follower/square spindle. No external, mechanical bolt switch contact is recommended. Only use the 5920 HESO panic spindle. Mount lever handles rotatably fixed on plates/ rosettes (easyfix®). EN 14846: set 11105 MS required.
Features and benefits:
- Split three-part lock follower; square 9 mm.
- Self-locking with sequence control and latch blocking.
- Electrically couplable external lever handle.
- Emergency opening via the cylinder (forced locking function).
- Panic C: panic side reversible inwards/outwards.
- Monitoring contacts: lever handle L/R, deadbolt and door status, cylinder integrated.
- Method of operation: standby/operating current via DIP switch.
- Opening impulse protected against tampering: DIP switch on/off.
- Connection cable (not in scope of supply): 12-pin; 10/ 20 m; 0.14 mm2.
- Operating voltage: 12/24 V DC ±15%; 100/50 mA
- Inputs: 12/24 V DC at GND.
- Outputs: potential free; loading capacity 30 V DC/100 mA.
- Three hardened deadbolts; 20 mm throw.
- Slider protection: mechanical top/bottom.
- Dampened, reversible DIN L/R comfort latch.
- Suitable for rotary knob cylinders.
- Follower turning angle 35°.
Multipoint lock, self-locking, electric coupling, panic C. The panic C function with split lock follower and separated lever handle control (outside/inside) offers the ideal combination of access control and escape route. Access is controlled via an identification system (e.g. badge) or the cylinder.
Note: The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder. Do not use a reduction sleeve for the Follower/square spindle. No external, mechanical bolt switch contact is recommended. Only use the 5920 HESO panic spindle. Mount lever handles rotatably fixed on plates/ rosettes (easyfix®). EN 14846: set 11105 MS required.
Features and benefits:
- Split three-part lock follower; square 9 mm.
- Self-locking with sequence control and latch blocking.
- Electrically couplable external lever handle.
- Emergency opening via the cylinder (forced locking function).
- Panic C: panic side reversible inwards/outwards.
- Monitoring contacts: lever handle L/R, deadbolt and door status, cylinder integrated.
- Method of operation: standby/operating current via DIP switch.
- Opening impulse protected against tampering: DIP switch on/off.
- Connection cable (not in scope of supply): 12-pin; 10/ 20 m; 0.14 mm2.
- Operating voltage: 12/24 V DC ±15%; 100/50 mA
- Inputs: 12/24 V DC at GND.
- Outputs: potential free; loading capacity 30 V DC/100 mA.
- Three hardened deadbolts; 20 mm throw.
- Slider protection: mechanical top/bottom.
- Dampened, reversible DIN L/R comfort latch.
- Suitable for rotary knob cylinders.
- Follower turning angle 35°.
Multipoint lock, self-locking, electric coupling, panic C. The panic C function with split lock follower and separated lever handle control (outside/inside) offers the ideal combination of access control and escape route. Access is controlled via an identification system (e.g. badge) or the cylinder.
Note: The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder. Do not use a reduction sleeve for the Follower/square spindle. No external, mechanical bolt switch contact is recommended. Only use the 5920 HESO panic spindle. Mount lever handles rotatably fixed on plates/ rosettes (easyfix®). EN 14846: set 11105 MS required.
Features and benefits:
- Split three-part lock follower; square 9 mm.
- Self-locking with sequence control and latch blocking.
- Electrically couplable external lever handle.
- Emergency opening via the cylinder (forced locking function).
- Panic C: panic side reversible inwards/outwards.
- Monitoring contacts: lever handle L/R, deadbolt and door status, cylinder integrated.
- Method of operation: standby/operating current via DIP switch.
- Opening impulse protected against tampering: DIP switch on/off.
- Connection cable (not in scope of supply): 12-pin; 10/ 20 m; 0.14 mm2.
- Operating voltage: 12/24 V DC ±15%; 100/50 mA
- Inputs: 12/24 V DC at GND.
- Outputs: potential free; loading capacity 30 V DC/100 mA.
- Three hardened deadbolts; 20 mm throw.
- Slider protection: mechanical top/bottom.
- Dampened, reversible DIN L/R comfort latch.
- Suitable for rotary knob cylinders.
- Follower turning angle 35°.
Color
Silver
Silver
Silver
Finish
Matt
Matt
Matt
Material
Stainless steel
Stainless steel
Stainless steel
Length
1744 mm, 1788 mm, 1850 mm
1744 mm, 1788 mm, 1850 mm
1744 mm, 1788 mm, 1850 mm
Height
18 mm, 20 mm
18 mm, 20 mm
18 mm, 20 mm
SKU Code
18970
18970
18970
Specification
Classification data
Lock type
Multipoint mortice lock.
Multipoint mortice lock.
Multipoint mortice lock.
Category of use
-
-
-
Standard
To DIN EN 15685, EN 14846, EN 1125 and EN 179.
To DIN EN 15685, EN 14846, EN 1125 and EN 179.
To DIN EN 15685, EN 14846, EN 1125 and EN 179.
Backset
60 mm., 70 mm., 80 mm.
65 mm., 70 mm., 80 mm.
65 mm., 80 mm.
Material and finish
Matt stainless steel faceplate.
Matt stainless steel faceplate.
Matt stainless steel faceplate.
Additional properties
Operating voltage
12/24 V d.c. +/-15%; 100/50 mA.
12/24 V d.c. +/-15%; 100/50 mA.
12/24 V d.c. +/-15%; 100/50 mA.
Cut-outs
PZ, 78 mm., PZ, 78 mm.
PZ, 72 mm., PZ, 92 mm., RZ, 74 mm., RZ, 94 mm.
PZ, 88 mm.
Locks with follower
9 mm.
9 mm.
9 mm.
Forend
Radiussed, 18 x 1788 mm., Radiussed, 20 x 1788 mm.
Radiussed, 20 x 1744 mm.
Radiussed, 20 x 1850 mm.