Summary
ITP SupaPerm SP100 single-layer breather membrane. A house wrap suitable for timber frame, vertical wall, modular & profiled metal roof installations.
ITP SupaPerm SP100 single-layer breather membrane. A house wrap suitable for timber frame, vertical wall, modular & profiled metal roof installations.
ITP SupaPerm SP100 single-layer breather membrane. A house wrap suitable for timber frame, vertical wall, modular & profiled metal roof installations.
Application
ITP SupaPerm SP100 house wrap for timber frame, modular build, walls and profiled metal roofs.
Storage and handling
- Store the membrane rolls horizontally in a cool, dry, sheltered store.
- Handle the membrane with care and ensure that the membrane is not creased or folded.
Installation
- Secure to the wall or timber structure with stainless steel staples. Staples and nails should be covered by a second layer of membrane.
- Pull the membrane tight and always fasten loose ends with staples.
- ITP Powerbond® D/S Jointing Tape Butyl can be installed between the recommended 100mm overlap.
- A continuous row of double-sided tape should be laid. A second row of tape can be laid within the same overlap and should be spaced 50mm apart.
- ITP Powebond® S/S Sealing Tape Acrylic can be used as a jointing and sealing tape to seal overlaps or for detail jointing E.g. within a window frame.
- Protect ITP SupaPerm (SP100) from UV exposure. Cover and finish the construction of the ITP SupaPerm (SP100) installation within a maximum of 2 months.
Corners
- Loosely install the membrane around corners or make a well sealed butt joint.
- Do not crease the membrane.
- In the case of making a corner lap/seal, stagger the joint with a 150mm vertical joint and a 100mm horizontal joint.
Overlaps
- Horizontal overlaps should be a minimum of 100mm.
- Vertical overlaps should be a minimum of 100mm.
- Overlaps should cover any any staples / nails.
See installation instructions for full details.
ITP SupaPerm SP100 house wrap for timber frame, modular build, walls and profiled metal roofs.
Storage and handling
- Store the membrane rolls horizontally in a cool, dry, sheltered store.
- Handle the membrane with care and ensure that the membrane is not creased or folded.
Installation
- Secure to the wall or timber structure with stainless steel staples. Staples and nails should be covered by a second layer of membrane.
- Pull the membrane tight and always fasten loose ends with staples.
- ITP Powerbond® D/S Jointing Tape Butyl can be installed between the recommended 100mm overlap.
- A continuous row of double-sided tape should be laid. A second row of tape can be laid within the same overlap and should be spaced 50mm apart.
- ITP Powebond® S/S Sealing Tape Acrylic can be used as a jointing and sealing tape to seal overlaps or for detail jointing E.g. within a window frame.
- Protect ITP SupaPerm (SP100) from UV exposure. Cover and finish the construction of the ITP SupaPerm (SP100) installation within a maximum of 2 months.
Corners
- Loosely install the membrane around corners or make a well sealed butt joint.
- Do not crease the membrane.
- In the case of making a corner lap/seal, stagger the joint with a 150mm vertical joint and a 100mm horizontal joint.
Overlaps
- Horizontal overlaps should be a minimum of 100mm.
- Vertical overlaps should be a minimum of 100mm.
- Overlaps should cover any any staples / nails.
See installation instructions for full details.
ITP SupaPerm SP100 house wrap for timber frame, modular build, walls and profiled metal roofs.
Storage and handling
- Store the membrane rolls horizontally in a cool, dry, sheltered store.
- Handle the membrane with care and ensure that the membrane is not creased or folded.
Installation
- Secure to the wall or timber structure with stainless steel staples. Staples and nails should be covered by a second layer of membrane.
- Pull the membrane tight and always fasten loose ends with staples.
- ITP Powerbond® D/S Jointing Tape Butyl can be installed between the recommended 100mm overlap.
- A continuous row of double-sided tape should be laid. A second row of tape can be laid within the same overlap and should be spaced 50mm apart.
- ITP Powebond® S/S Sealing Tape Acrylic can be used as a jointing and sealing tape to seal overlaps or for detail jointing E.g. within a window frame.
- Protect ITP SupaPerm (SP100) from UV exposure. Cover and finish the construction of the ITP SupaPerm (SP100) installation within a maximum of 2 months.
Corners
- Loosely install the membrane around corners or make a well sealed butt joint.
- Do not crease the membrane.
- In the case of making a corner lap/seal, stagger the joint with a 150mm vertical joint and a 100mm horizontal joint.
Overlaps
- Horizontal overlaps should be a minimum of 100mm.
- Vertical overlaps should be a minimum of 100mm.
- Overlaps should cover any any staples / nails.
See installation instructions for full details.
Description
ITP SupaPerm SP100 is a single-layer non-woven breather membrane fabric which is both water resistant and breathable, installed on the cold side of the insulation on external wall applications.
ITP SupaPerm (SP100) is suitable for use in timber frame, modular, and wall applications. ITP SupaPerm (SP100) creates a breathable layer of protection which lets moisture from within the build to escape allowing the structure to breathe whilst it's water resistant properties protect the building and insulation from water ingress. ITP SupaPerm (SP100) can also be used on profiled metal industrial roof applications.
Can be used in conjunction with ITP Powerlon® VCL 250 or ITP Powerlon® VCL 170 vapour barriers which are installed on the warm side of the building envelope.
Features and benefits:
- Breather membrane for all closed wall applications, timber frame and modular.
- Breather membrane for industrial profiled metal roofs.
- CE approval.
- Water resistant and breathable.
- High tensile strength and nail tear resistance.
- Breathable to BS 4016.
- Can be printed with your company logo.
ITP SupaPerm SP100 is a single-layer non-woven breather membrane fabric which is both water resistant and breathable, installed on the cold side of the insulation on external wall applications.
ITP SupaPerm (SP100) is suitable for use in timber frame, modular, and wall applications. ITP SupaPerm (SP100) creates a breathable layer of protection which lets moisture from within the build to escape allowing the structure to breathe whilst it's water resistant properties protect the building and insulation from water ingress. ITP SupaPerm (SP100) can also be used on profiled metal industrial roof applications.
Can be used in conjunction with ITP Powerlon® VCL 250 or ITP Powerlon® VCL 170 vapour barriers which are installed on the warm side of the building envelope.
Features and benefits:
- Breather membrane for all closed wall applications, timber frame and modular.
- Breather membrane for industrial profiled metal roofs.
- CE approval.
- Water resistant and breathable.
- High tensile strength and nail tear resistance.
- Breathable to BS 4016.
- Can be printed with your company logo.
ITP SupaPerm SP100 is a single-layer non-woven breather membrane fabric which is both water resistant and breathable, installed on the cold side of the insulation on external wall applications.
ITP SupaPerm (SP100) is suitable for use in timber frame, modular, and wall applications. ITP SupaPerm (SP100) creates a breathable layer of protection which lets moisture from within the build to escape allowing the structure to breathe whilst it's water resistant properties protect the building and insulation from water ingress. ITP SupaPerm (SP100) can also be used on profiled metal industrial roof applications.
Can be used in conjunction with ITP Powerlon® VCL 250 or ITP Powerlon® VCL 170 vapour barriers which are installed on the warm side of the building envelope.
Features and benefits:
- Breather membrane for all closed wall applications, timber frame and modular.
- Breather membrane for industrial profiled metal roofs.
- CE approval.
- Water resistant and breathable.
- High tensile strength and nail tear resistance.
- Breathable to BS 4016.
- Can be printed with your company logo.
Product certifications
- CE Marking Powerlon® SupaPerm 100 (SP100) - CE Marking
- CE Marking Powerlon® SupaPerm 100 (SP100) - CE Marking
- CE Marking Powerlon® SupaPerm 100 (SP100) - CE Marking
Color
Black
Black
Black
Finish
Textured
Textured
Textured
Material
Polypropylene
Polypropylene
Polypropylene
Shape
Rectangle
Rectangle
Rectangle
Length
100000 mm
100000 mm
100000 mm
Width
1600 mm, 2700 mm, 3200 mm
1600 mm, 2700 mm, 3200 mm
1600 mm, 2700 mm, 3200 mm
Specification
Classification data
Standard
To BS EN 13859-2.
To BS EN 13859-2.
To BS EN 13859-2.
Performance criteria
-
-
-
Water vapour properties
Water vapour transmission determined in accordance with BS 7374, 0.09 MNs/g.
Water vapour transmission determined in accordance with BS 7374, 0.09 MNs/g.
Water vapour transmission determined in accordance with BS 7374, 0.09 MNs/g.
Fire performance
Reaction to fire: To EN ISO 11925-2, Class F.
Reaction to fire: To EN ISO 11925-2, Class F.
Reaction to fire: To EN ISO 11925-2, Class F.
Tensile properties
Tensile strength to BS EN 12311-1; 200 N/ 50 mm (MD); 140 N/ 50 mm (CD).
Tensile strength to BS EN 12311-1; 200 N/ 50 mm (MD); 140 N/ 50 mm (CD).
Tensile strength to BS EN 12311-1; 200 N/ 50 mm (MD); 140 N/ 50 mm (CD).
Class (minimum)
W2.
W2.
W2.
Material
High-density polyethylene (PE-HD).
High-density polyethylene (PE-HD).
High-density polyethylene (PE-HD).
Form
Non-woven.
Non-woven.
Non-woven.
Weight (minimum)
100 g/m².
100 g/m².
100 g/m².
Additional properties
Tear resistance
To EN 12310-1, 90 N (MD); 110 N (CD).
To EN 12310-1, 90 N (MD); 110 N (CD).
To EN 12310-1, 90 N (MD); 110 N (CD).
Roll size
1.6 x 100 m.
2.7 x 100 m.
3.2 x 100 m.
Roll weight
17 kg.
28 kg.
33 kg.
Colour
Black.
Black.
Black.
Sustainability data
Contains Red List materials
No
No
No
Country of material origin
Europe
Europe
Europe
Country of product manufacture
Europe
Europe
Europe
Material
Polypropylene
Polypropylene
Polypropylene
Recyclability
Suitable for waste to energy
Suitable for waste to energy
Suitable for waste to energy