A pigmented, solvent–free, self–smoothing epoxy flooring system, designed to ground electrostatic discharge in EPAs (electrostatic protected areas).
A pigmented, solvent–free, self–smoothing epoxy flooring system, designed to ground electrostatic discharge in EPAs (electrostatic protected areas).
Other, Grey
Other, Grey
Smooth
Smooth
Epoxy resin
Epoxy resin
Other
Other
Specification
Concrete bases and suitable cement/ sand levelling screeds., Cementitious underlayments designed to receive resin flooring.
Concrete bases and suitable cement/ sand levelling screeds., Cementitious underlayments designed to receive resin flooring.
vebro EP ESD Prime., vebro EP Primer., vebro EP DPM., vebro EP DPM Plus.
vebro EP ESD Prime., vebro EP Primer., vebro EP DPM., vebro EP DPM Plus.
Resin floor coatings.
Resin floor coatings.
Additional properties
vebro 52 Silica Sand.
vebro 52 Silica Sand.
1.0—2.0 mm., 1.5—2.5 mm.
1.0—2.0 mm., 1.5—2.5 mm.
vebro EP ESD SL (Conductive).
vebro EP ESD SL (Dissipative).
Not required., vebro PU ESD Seal.
Not required., vebro PU ESD Seal.
24 hours (light foot traffic); 72 hours (wheeled traffic).
24 hours (light foot traffic); 72 hours (wheeled traffic).
Full chemical cure in 5 days.
Full chemical cure in 5 days.
Light Grey RAL 7035., Agate Grey RAL 7038., Dusty Grey RAL 7037., Concrete Grey RAL 7023., Graphite Grey RAL 7024., Beige RAL 1001.
Light Grey RAL 7035., Agate Grey RAL 7038., Dusty Grey RAL 7037., Concrete Grey RAL 7023., Graphite Grey RAL 7024., Beige RAL 1001.
To DIN 51130, Class R11 (Dry).
To DIN 51130, Class R11 (Dry).
Resistant to a very wide range of aggressive chemicals and corrosive byproducts.
Resistant to a very wide range of aggressive chemicals and corrosive byproducts.
To EN 61340-4-1, ≤ 10⁹ Ω (Rg), ≤ 3.5 x 10⁷ Ω (Rs).
To EN 61340-4-1, ≤ 10⁹ Ω (Rg), ≤ 3.5 x 10⁷ Ω (Rs) <100 Volt (Body Voltage).
To EN 196-1, 70 N/mm².
To EN 196, 44 N/mm².
≤100 μg/m³.
≤100 μg/m³.
To EN 13501-1, Bfl s1.
To EN 13501-1, Bfl s1.
To EN ISO 5470-1, ≤60 mg/1000 cycles.
To EN ISO 5470-1, ≤60 mg/1000 cycles.
To EN ISO 868, D 82.
To EN ISO 868, D 58.
To EN 196, 40 N/mm².
To EN 196, 20 N/mm².
20—25 mins.
20—25 mins.