Grey

-

-

Powder-coated

-

-

Metal

-

-

Rectangle

-

-

Bespoke

-

-

Bespoke

-

-

Bespoke

-

-

To BS EN IEC 62040-1 and BS EN 62040-3.

-

-

Submit type test certificates.

-

-

Online.

-

-

Parallel with bypass.

-

-

-

-

-

97.6%.

-

-

99.4%.

-

-

Suitable for use with loads operating at any power factor (leading or lagging) up to 0.9.

-

-

-

-

-

Three-phase 400 V a.c.

-

-

±1%.

-

-

50 Hz. ±2%., 60 Hz. ±2%.

-

-

>0.99 at full load.

-

-

≤0.9% at full load.

-

-

Maximum 1.8 sec at full load.

-

-

-

-

-

25 kV·A.

-

-

380/220 V., 400/230 V., 415/240 V.

-

-

±1%.

-

-

Sinusoidal in both normal and stored energy mode of operation.

-

-

<1% with linear load.

-

-

50 Hz., 60 Hz.

-

-

+/- 2%., +/- 4%.

-

-

120% continuous.

-

-

1.

-

-

>3:1.

-

-

-

-

-

Fault condition.

-

-

Automatic unless under manual control or fault conditions are present.

-

-

Not required., Required.

-

-

-

-

-

Separate battery enclosures.

-

-

Lead-acid.

-

-

12 V.

-

-

Required.

-

-

-

-

-

Within 12 hours.

-

-

-

-

-

3.5” User Graphical LCD Interface.

-

-

-

-

-

Integral alarm within UPS enclosure.

-

-

Activated by any fault condition. Continuous output until fault cleared or alarm silenced. Silencing of the alarm must not clear LED status indication.

-

-

SNMP adaptor.

-

-

-

-

-

-

-

-

Welded carbon steel. Assemble to prevent distortion when the complete enclosure is lifted or transported.

-

-

Epoxy powder-coated.

-

-

RAL 7024 Graphite grey.

-

-

For top entry cables., For bottom entry cables., For front entry cables.

-

-

-

-

-

Actively controlled fan ventilation.

-

-

Required.

-

-

-

-

-

<46 dBA.

-

-

Metal

-

-