Silver, Black, White, Grey, Gold, Copper, Other

-

-

Chrome, Brushed, Matt

-

-

Zinc, Steel, Stainless steel

-

-

Other

-

-

140 mm, 220 mm

-

-

172 mm, 217 mm, 249 mm

-

-

Two year

-

-

QEC 11627; WRAS certified; Global GreenTag certified.

-

-

Chilled and boiling drinking water. Hot and cold domestic water through the mixer tap.

-

-

-

-

-

5 L tank with 9 L initial draw off.

-

-

Up to 180 per hour.

-

-

Up to 175 per hour.

-

-

Maximum height x overall depth (above counter). Hole sizes required: 35 mm. Inlet centre to outlet, dispenser: 98 mm. Bench thickness, dispenser: 1–48 mm; mixer tap: maximum 45 mm. Note that the optional riser and font (see Accessories) will increase the dispenser height and outlet height.

-

-

-

-

-

A 13 amp single-switched socket must be positioned at a high level and accessible within the cupboard. The unit comes with a 1 m flex cord and plug.

-

-

230 V.

-

-

An accessible drinking water supply from a 15 mm pipe into two stop taps via a 'T' piece, with a minimum pressure of 4 bar static and 10 litres-per-minute flow should be located in the base unit of the installation location.

-

-

Lever control.

-

-

Chrome (CH)., Brushed (BR)., Matte Black (MB)., Matte White (MW)., Gun Metal Grey (GM)., Rose Gold (RG)., Urban Brass (UB)., Brushed Rose Gold (BRG).

-

-

None., 120 mm riser and font (992803)., Tubing extension kit for Plus unit (990714)., iX02 limescale filter (994032).

-

-

Quadra under-bench unit with 800 mm tube.
Premium filter.

-

-

A 32 mm/ 40 mm mains waste pipe is required within the base unit.
This pipe should include a trap or U-bend to prevent any unpleasant odours. If there is a spigot waste connection, two spigots are required to connect to the waste and condenser line.

-

-

BREAMM compliant; LEED compliant.

-

-

No

-

-

Australia

-

-

Zinc, Steel, Stainless steel

-

-

Seven year

-

-