Traditional standing-seam cladding.
Traditional standing-seam cladding.
Silver, Other
Silver, Other
Embossed, Painted, Natural
Embossed, Painted, Natural
Aluminium, Steel
Aluminium, Steel
Other
Other
Bespoke
Bespoke
Bespoke
Bespoke
40 mm
40 mm
25 year
25 year
Specification
-
-
Not required., AP19 LPH profile in 0.4 mm steel in off-white 80F - solid., APL StrongBak™.
Not required., AP19 LPH profile in 0.4 mm steel in off-white 80F - solid., APL StrongBak™.
APL P191/HH fixing range.
APL P191/HH fixing range.
Minimum 75 mm; APL P191/HH fixing range at one per mid span, APL P103 + P108/VCT sidelap sealant range, P152 Flute Fillers.
Minimum 75 mm; APL P191/HH fixing range at one per mid span, APL P103 + P108/VCT sidelap sealant range, P152 Flute Fillers.
-
-
AP19 LPH Liner sheet., APL StrongBak™., Other.
AP19 LPH Liner sheet., APL StrongBak™., Other.
APL P191/HH fixing range., Other.
APL P191/HH fixing range., Other.
APL P191/HH fixing range (side laps sealed with two runs of P108/VCT)., Other.
APL P191/HH fixing range (side laps sealed with two runs of P108/VCT)., Other.
Tritherm Spacer System℗ - Fully-Filled Cavity.
Tritherm Spacer System℗ - Fully-Filled Cavity.
A1-rated with thickness and performance specification as required to meet performance.
A1-rated with thickness and performance specification as required to meet performance.
Between liner/ sheathing board and decking profile: A1-rated, thickness as required to meet U-value requirement., Above decking profile/ above OSB - 30 mm Rockwool RW5.
Between liner/ sheathing board and decking profile: A1-rated, thickness as required to meet U-value requirement., Above decking profile/ above OSB - 30 mm Rockwool RW5.
-
-
APL SnapLoc™ 40 / module width - steel.
APL SnapLoc™ 40 / module width - aluminium.
APL 191/LP fixing range at top of each sheet; decking sheet with APL P191/HH fixing range in each corrugation to APZ; P719 tribar fixed at max 200 mm crs to decking profile; P716 cleat fixed with P191/CSK range with three per cleat.
APL 191/LP fixing range at top of each sheet; decking sheet with APL P191/HH fixing range in each corrugation to APZ; P719 tribar fixed at max 200 mm crs to decking profile; P716 cleat fixed with P191/CSK range with three per cleat.
Required., Not required.
Required., Not required.
APL System Flashings., APL Fixings (P191 & P192)., APL Sealants and P152 profile flute fillers as APL recommendations and to match profiles., P744 "Snapper" for installation on SnapLoc profile., Verge closer with P152 filler block on P103/SB6 expanding foam tape.
APL System Flashings., APL Fixings (P191 & P192)., APL Sealants and P152 profile flute fillers as APL recommendations and to match profiles., P744 "Snapper" for installation on SnapLoc profile., Verge closer with P152 filler block on P103/SB6 expanding foam tape.
Additional properties
-
-
For decking profile onto steel cladding rails - P157 HHBs Generally not exceeding 1500 mm max c/c., For decking profile onto SFS / Blockwork - P618 tophats & P157 HHBs generally not exceeding 1200 mm max c/c., For SnapLoc profile onto APL decking profile - Tribar fixed to APL decking profile at max 600 mm crs and and at each end of each sheet.
For decking profile onto steel cladding rails - P157 HHBs Generally not exceeding 1500 mm max c/c., For decking profile onto SFS / Blockwork - P618 tophats & P157 HHBs generally not exceeding 1200 mm max c/c., For SnapLoc profile onto APL decking profile - Tribar fixed to APL decking profile at max 600 mm crs and and at each end of each sheet.
APL P191/HH + P191/LP + P191/CSK fixing range as required for components including P716 cleat to Tribar at max 400 mm crs and each end of each SnapLoc sheet; For RW3 insulation, use one P534/SL washer with P191/CSK fixing per board.
APL P191/HH + P191/LP + P191/CSK fixing range as required for components including P716 cleat to Tribar at max 400 mm crs and each end of each SnapLoc sheet; For RW3 insulation, use one P534/SL washer with P191/CSK fixing per board.
APL PUF., Colorcoat® PRISMA, LeatherGrain Plastisol, Natural Galvanized Steel.
Armacoil™ HDP., Stucco-Embossed Mill-Finish (SEMF)., Smooth Mill Finish (MF)., SnapLoc™Aluminium-ZINC.
0.7 mm.
0.9 mm.
50 mm for decking profile.
50 mm for decking profile.
85%.
Up to 95%.
Sustainability data
No
No
United Kingdom
United Kingdom
United Kingdom
United Kingdom
High
High
%
%