Fan Coil Units. Small Terminal Units. Slimline FCUs.

Fan Coil Units. Small Terminal Units. Slimline FCUs.

The FloSet Compact is the smallest FCU valve set in the market for pressure independent automatic balancing and control. Comprises a FlowCon Flushing By-Pass on 40 mm centres with 5 modes of operation including full isolation of the coil and high Kvs by-pass for full velocity system flush; a FlowCon Flow Venturi Metering Station (+ 5% accuracy), with integrated Test Point and fitted with Combined PT Plug & Drain in the Flow Branch; the FlowCon Green Pressure Independent Control Valve with an externally adjustable, removable Insert, fitted with an integrated Test Point & Combined PT Plug & Drain Valve before the PICV in the return branch; a FlowCon self-calibrating full stroke IP54-rated Electric Actuator for either modulating or raise lower applications; Union Solder FCU Connections for direct mounting onto the Fan Coil Unit over the drip tray; female threaded system-side connections and optional a Blank Cap for flushing.

Features and benefits:

• Heating & Cooling Duty -10˚C – +120˚C.
• Static pressure 25 Bar maximum.
• Differential pressure up to 800 kPa, PICV insert dependent.
• Separate PICV maximum flow setting and full stroke control at all flow rate settings.
• Adjustable control characteristic (linear or equal %).
• Accurate flow measurement at the terminal unit.
• Flushing, Drain & Test Points in the flow and return.
• Flow rates 0.005 – 0.4 l/s, 41 settings per insert type (5 types in total) for superior setting accuracy.
• Low PICV hysteresis for enhanced repeatability.
• Line sizes DN15-20.
• Optional Strainer (static pressure 20 Bar maximum), manual air vent and Automatic Air Vent (static pressure 10 Bar maximum).
• Flow and return branches are equal length.
• Union connections on all joints.
• Fully tested, labelled, cross-referenced to schedule, with QR code link to technical data.
• Vertical & horizontal configuration to fit over the drip tray.

The FloSet Compact is the smallest FCU valve set in the market for pressure independent automatic balancing and control. Comprises a FlowCon Flushing By-Pass on 40 mm centres with 5 modes of operation including full isolation of the coil and high Kvs by-pass for full velocity system flush; a FlowCon Flow Venturi Metering Station (+ 5% accuracy), with integrated Test Point and fitted with Combined PT Plug & Drain in the Flow Branch; the FlowCon Green Pressure Independent Control Valve with an externally adjustable, removable Insert, fitted with an integrated Test Point & Combined PT Plug & Drain Valve before the PICV in the return branch; a FlowCon self-calibrating full stroke IP54-rated Electric Actuator for either modulating or raise lower applications; Union Solder FCU Connections for direct mounting onto the Fan Coil Unit over the drip tray; female threaded system-side connections and optional a Blank Cap for flushing.

Features and benefits:

• Heating & Cooling Duty -10˚C – +120˚C.
• Static pressure 25 Bar maximum.
• Differential pressure up to 800 kPa, PICV insert dependent.
• Separate PICV maximum flow setting and full stroke control at all flow rate settings.
• Adjustable control characteristic (linear or equal %).
• Accurate flow measurement at the terminal unit.
• Flushing, Drain & Test Points in the flow and return.
• Flow rates 0.005 – 0.4 l/s, 41 settings per insert type (5 types in total) for superior setting accuracy.
• Low PICV hysteresis for enhanced repeatability.
• Line sizes DN15-20.
• Optional Strainer (static pressure 20 Bar maximum), manual air vent and Automatic Air Vent (static pressure 10 Bar maximum).
• Flow and return branches are equal length.
• Union connections on all joints.
• Fully tested, labelled, cross-referenced to schedule, with QR code link to technical data.
• Vertical & horizontal configuration to fit over the drip tray.