Summary
This Vent / Aerator is designed to help remove water vapour that forms between the roof slab and the waterproof roofing felt. Allows hot air to escape from between the roof slab and the waterproofing.
This Vent / Aerator is designed to help remove water vapour that forms between the roof slab and the waterproof roofing felt. Allows hot air to escape from between the roof slab and the waterproofing.
This Vent / Aerator is designed to help remove water vapour that forms between the roof slab and the waterproof roofing felt. Allows hot air to escape from between the roof slab and the waterproofing.
Application
Welded PVC aerator / vent to fit onto concrete slab for single ply membranes.
Welded PVC aerator / vent to fit onto concrete slab for single ply membranes.
Welded PVC aerator / vent to fit onto concrete slab for single ply membranes.
Description
Tough and durable vent, designed to help aerate concrete slabs and allow the structure to breathe.
Features and benefits:
- It draws moisture away from a concrete slab and is placed onto the bare concrete beneath the waterproofing membrane and insulation.
- Bonded by using hot air gun (not direct contact to a flame).
- The membrane is welded to the top of the base of the vent, creating a flue which helps to draw vapour out of the concrete.
- There are a series of ribs along the underside of the round base plate which encourage the movement of vapour along the base and into the flue and also act to alleviate any hot air which might appear between the slab and the membrane.
- The top of the flue has three lateral holes to allow the vapour to escape into the atmosphere.
- It is covered by a hood which overlaps the internal holes, preventing rainwater entering the system but still allowing the passage of vapour.
Tough and durable vent, designed to help aerate concrete slabs and allow the structure to breathe.
Features and benefits:
- It draws moisture away from a concrete slab and is placed onto the bare concrete beneath the waterproofing membrane and insulation.
- Bonded by using hot air gun (not direct contact to a flame).
- The membrane is welded to the top of the base of the vent, creating a flue which helps to draw vapour out of the concrete.
- There are a series of ribs along the underside of the round base plate which encourage the movement of vapour along the base and into the flue and also act to alleviate any hot air which might appear between the slab and the membrane.
- The top of the flue has three lateral holes to allow the vapour to escape into the atmosphere.
- It is covered by a hood which overlaps the internal holes, preventing rainwater entering the system but still allowing the passage of vapour.
Tough and durable vent, designed to help aerate concrete slabs and allow the structure to breathe.
Features and benefits:
- It draws moisture away from a concrete slab and is placed onto the bare concrete beneath the waterproofing membrane and insulation.
- Bonded by using hot air gun (not direct contact to a flame).
- The membrane is welded to the top of the base of the vent, creating a flue which helps to draw vapour out of the concrete.
- There are a series of ribs along the underside of the round base plate which encourage the movement of vapour along the base and into the flue and also act to alleviate any hot air which might appear between the slab and the membrane.
- The top of the flue has three lateral holes to allow the vapour to escape into the atmosphere.
- It is covered by a hood which overlaps the internal holes, preventing rainwater entering the system but still allowing the passage of vapour.
Color
Black, White
Black, White
Black, White
Finish
Matt
Matt
Matt
Material
Polyvinyl chloride (PVC), Polypropylene
Polyvinyl chloride (PVC), Polypropylene
Polyvinyl chloride (PVC), Polypropylene
Shape
Circle, Other
Circle, Other
Circle, Other
Length
275 mm
275 mm
275 mm
Width
77 mm
77 mm
77 mm
Height
275 mm
275 mm
275 mm
Warranty description
15 year
15 year
15 year
SKU Code
RO-PVC-120-425-240-075-Z
RO-PVC-120-425-240-075-Z
RO-PVC-120-425-240-075-Z
Specification
Classification data
Material
PVC/ TPE.
PVC/ TPE.
PVC/ TPE.
Colour
Black/ white.
Black/ white.
Black/ white.
Size
-
-
-
Diameter or section (minimum)
125 mm.
125 mm.
76 mm.
Flange base (minimum)
390 mm.
390 mm.
320 mm.
Additional properties
Product Reference
PVC Vents
PVC Vents
PVC Vents
Height
400 mm.
160 mm.
240 mm.
Hood
Manufacturer's standard., ESTRAER®.
Manufacturer's standard., ESTRAER®.
Manufacturer's standard., ESTRAER®.
Sustainability data
Contains Red List materials
Yes
Yes
Yes
Country of material origin
Italy
Italy
Italy
Country of product manufacture
Italy
Italy
Italy
Material
Polyvinyl chloride (PVC), Polypropylene
Polyvinyl chloride (PVC), Polypropylene
Polyvinyl chloride (PVC), Polypropylene
Recyclability
100
100
100
Recycled content
0 %
0 %
0 %