Summary
Polyester-based mortar for bedding and fixing.
Polyester-based mortar for bedding and fixing.
Application
Suitable for the following:
- Bedding/ fixing manhole frames.
- Bedding of airport landing lights.
- Bedding of duct frames.
- Fixing precast concrete units e.g. kerb stones.
- Drains.
- Highway fixtures.
Suitable for external use on:
- Concrete.
- Dense brickwork.
- Asphalt.
- Stone.
- Block pavers.
Do not apply below 10°C (standard grade).
Suitable for the following:
- Bedding/ fixing manhole frames.
- Bedding of airport landing lights.
- Bedding of duct frames.
- Fixing precast concrete units e.g. kerb stones.
- Drains.
- Highway fixtures.
Suitable for external use on:
- Concrete.
- Dense brickwork.
- Asphalt.
- Stone.
- Block pavers.
Do not apply below 10°C (standard grade).
Description
Three-component polyester-based mortar for the bedding and fixing of manhole frames, airport landing lights, duct frames and precast concrete units.
Features and benefits:
- Designed for the requirements of DMRB CD534.
- Easy to mix and place.
- Good working time for ease of placement.
- Rapid setting for quick return to service (within two hours at 20°C).
- Rapid grade available for cold weather working or fast completion work. Can be used down to 0°C.
- Good chemical and freeze/ thaw resistance.
- Good bond strength.
- Fully complies with the Design Manual for Roads and Bridges Volume 4, Section 2, Part 5, HA 104/09.
Consult manufacturer's literature for preparation and mixing guidelines.
Three-component polyester-based mortar for the bedding and fixing of manhole frames, airport landing lights, duct frames and precast concrete units.
Features and benefits:
- Designed for the requirements of DMRB CD534.
- Easy to mix and place.
- Good working time for ease of placement.
- Rapid setting for quick return to service (within two hours at 20°C).
- Rapid grade available for cold weather working or fast completion work. Can be used down to 0°C.
- Good chemical and freeze/ thaw resistance.
- Good bond strength.
- Fully complies with the Design Manual for Roads and Bridges Volume 4, Section 2, Part 5, HA 104/09.
Consult manufacturer's literature for preparation and mixing guidelines.
Material
Polyester
Polyester
Shape
Formless
Formless
Specification
Classification data
Delivery condition
Bagged.
Bagged.
Additional properties
Grades
Standard.
Rapid.
TensileStrength
10 MPa.
9 MPa.
Application temperature
10–40°C.
0–15°C.
Working time
8–55 minutes (dependent on temperature).
15–40 minutes (dependent on temperature).
CompressiveStrength
85 MPa (maximum).
80 MPa (maximum).
Flexural strength
12 MPa.
10 MPa.
Flexural Modulus
10–12 GPa.
10–12 GPa.
Density
2100 kg/m³.
2100 kg/m³.
Typical yield
12 L/pack.
12 L/pack.
Sustainability data
Material
Polyester
Polyester