Suitable as valve assembly for fan-coil or terminal unit.

DZR brass pressure independent control valve with strainer drain, flow measurement device and flushing drains, PN16.

Features and benefits:

• Compact, pre-fabricated unit – now available with Elite Prime PICV with a wide range of settable flows to suit all applications.
• All valves are subject to both a pressure test, in accordance with BS EN 12266-1, as well as a flow limitation test, in accordance to BSRIA BTS1.
• The test provides reassurance of performance and accuracy within each valve.
• Provides accurate flow rates and differential pressure control, as well as flow measurement (EP601PF) with system flushing and isolation.
• DZR H Body tested to 3.1 x Design Working Pressure (DWP) during development for design robustness and tested to EN12516-2 to comply with the Pressure Equipment Directive (PED).
• Fully assembled and factory tested unit reduces installation time, costs and specification risks.
• The Fig. 1934 PICV is available in 400 kPa and 800 kPa rated variants.
• On-Off, modulating or feedback actuators are available separately to match specification.
• Valve assembly will be labelled to include the terminal reference number and flow rate.
• Preassembled to the requirements of each individual terminal unit, to include a flushing by-pass with integral isolation valve.