Type 6 stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15 m and cavity widths from 50–100 mm.
Type 6 stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15 m and cavity widths from 50–100 mm.
Type 6 stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15 m and cavity widths from 50–100 mm.
Silver
Silver
Silver
Stainless steel
Stainless steel
Stainless steel
125 mm, 150 mm, 175 mm
125 mm, 150 mm, 175 mm
125 mm, 150 mm, 175 mm
Specification
To BS EN 845-1.
To BS EN 845-1.
To BS EN 845-1.
Type 6 (strength) to BS EN 845-1.
Type 6 (strength) to BS EN 845-1.
Type 6 (strength) to BS EN 845-1.
Grade 304 stainless steel.
Grade 304 stainless steel.
Grade 304 stainless steel.
125 mm.
150 mm.
175 mm.
Manufacturer's standard.
Manufacturer's standard.
Manufacturer's standard.
Manufacturer's standard.
Manufacturer's standard.
Manufacturer's standard.
Manufacturer's standard.
Manufacturer's standard.
Manufacturer's standard.
-
-
-
Manufacturer's standard.
Manufacturer's standard.
Manufacturer's standard.
Resistant (drip feature).
Resistant (drip feature).
Resistant (drip feature).
Manufacturer's standard.
Manufacturer's standard.
Manufacturer's standard.
Timber end: 531 N/ 450 N; mortar end: 604 N.
Timber end: 639 N/ 449 N; mortar end: 604 N.
Timber end: 597 N/ 549 N; mortar end: 968 N.
Timber end: 633 N/ 663 N; mortar end: 1466 N.
Timber end: 660 N/ 663 N; mortar end: 1466 N.
Timber end: 660 N/ 675 N; mortar end: 1786 N.
Type B.
Type B.
Type B.
Additional properties
UKCA marked.
UKCA marked.
UKCA marked.
-
-
-
50 mm.
75 mm.
100 mm.
50 x 3.35 mm stainless steel annular ring nails., 50 x 4.0 mm stainless steel screws for SIPS panels.
50 x 3.35 mm stainless steel annular ring nails., 50 x 4.0 mm stainless steel screws for SIPS panels.
50 x 3.35 mm stainless steel annular ring nails., 50 x 4.0 mm stainless steel screws for SIPS panels.
Sustainability data
No
No
No
United Kingdom
United Kingdom
United Kingdom
Recyclable
Recyclable
Recyclable
0 %
0 %
0 %