Summary
Expanded polystyrene (EPS) insulation for use in ground bearing and suspended floor constructions for both new and existing domestic and commercial buildings.
-
-
Application
Suitable for use below slab in solid ground floors.
-
-
Description
Jabfloor HP and HP+ is a closed-cell expanded polystyrene (EPS) insulation board for use below slab or over slab with a screed or timber board finish in ground-bearing or suspended concrete floors.
Jabfloor HP and HP+ is grey in colour due to the carbon additive which acts within the boards to disperse and reflect heat radiation. This gives the boards an improvement in thermal performance compared to white EPS.
Jabfloor HP and HP+ does not degrade when placed in high moisture areas and is resistant to the effects of freeze-thaw. It will remain an effective insulation for the life of the building.
Jabfloor HP and HP+ is lightweight and easy to install. There are no requirements for special PPE when installing or cutting Jabfloor HP and HP+.
Features and benefits:
- Available in a range of compressive strengths to suit building types from domestic to commercial.
- Approved by BBA as Jablite Floor Insulation High Performance, certificate number 21/5858.
- NHBC approved.
- Can withstand temperatures of up to 80°C, making it suitable for use with underfloor heating systems.
- Ozone depletion potential (ODP) of zero and a global warming potential (GWP) of less than 5.
-
-
Product certifications
-
-
Color
Grey
-
-
Material
Expanded polystyrene (EPS)
-
-
Shape
Rectangle
-
-
Length
2400 mm
-
-
Width
1200 mm
-
-
Height
25 mm, 30 mm, 40 mm, 50 mm, 60 mm, 75 mm, 100 mm, 150 mm, 200 mm
-
-
Specification
Standard
To BS EN 13163.
-
-
Third-party certification
BBA certified.
-
-
Fire performance
-
-
-
Compressive strength (minimum) at 10% compression
70 kPa.
-
-
Thermal conductivity (maximum)
0.032 W/m·K.
-
-
Thickness
25 mm., 30 mm., 40 mm., 50 mm., 60 mm., 75 mm., 100 mm., 150 mm., 200 mm.
-
-
Face size (nominal length x width)
2400 x 1200 mm.
-
-
Sustainability data
Material
Expanded polystyrene (EPS)
-
-
Recyclability
100% recyclable.
-
-