A-Z
Showing 37-72 of 89
BauderFLEX G4E Roofing membrane - Technical Data Sheet
Bauder Ltd
BauderFLEX K4E Roofing membrane (Brown)
Bauder Ltd
Elastomer bitumen torch-on capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.
BauderFLEX K4E Roofing membrane (Charcoal grey)
Bauder Ltd
Elastomer bitumen torch-on capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.
BauderFLEX K4E Roofing membrane (Grey Slate)
Bauder Ltd
Elastomer bitumen torch-on capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.
BauderKARAT Roofing membrane
Bauder Ltd
Polymer bitumen dual formulation torch-on capping sheet. APP plastomeric top and SBS elastomeric bottom. The product features a 300g/m² spunbond polyester/glass composite reinforcement to allow the finished product to
cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.
For use in Bauder Total Roof System PLUS
BauderPIR FA Flatboard Insulation
Bauder Ltd
Rigid polyurethane foam board faced on both sides with aluminium foil.
Thermal insulation with a low thermal conductivity for use within Bauder warm roof single-ply waterproofing systems to provide efficient thermal insulation.
BauderPIR FA G16 Tapered Insulation
Bauder Ltd
Rigid polyurethane foam board faced on both sides with aluminium foil. The top facing features a number and arrow to indicate board size and direction of fall, and also has a printed grid pattern to aid cutting on site.
Thermal insulation with a low thermal conductivity to provide falls on a roof, for use within Bauder warm roof systems.
BauderPIR FA-TE Flatboard Insulation
Bauder Ltd
Rigid polyurethane foam board faced on both sides with aluminium foil. The top facing features a printed grid pattern to aid cutting on site.
Thermal insulation with a low thermal conductivity for use within Bauder warm roof waterproofing systems to provide efficient thermal insulation.
BauderPIR GFS G16 Tapered Ridge Infills
Bauder Ltd
Tapered EPP rigid foam ridge infill board manufactured with a slope of 1.6% to be used where required to compete the BauderPIR FA G16 tapered insulation scheme.
BauderPIR GFS G16 ridge infill is used at 90 degree junctions on the roof to create a fall in two directions. Please refer to the BauderPIR FA G16 tapered insulation scheme for number of boards required and also location of the ridge infills.
BauderPIR KFS G16 Tapered Valley Infills
Bauder Ltd
Tapered EPP rigid foam valley infill board manufactured with a slope of 1.6% to be used where required to compete the BauderPIR FA G16 tapered insulation scheme.
BauderPIR KFS G16 valley infill is used at 90 degree junctions on the roof to create a fall in one direction. Please refer to the BauderPIR FA G16 tapered insulation scheme for number of boards required and also location of the
valley infills.
BauderPLANT E 42 Roofing membrane
Bauder Ltd
Elastomer-bitumen torch on capping sheet with root-resistance according to FLL. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture.
BauderPLANT E Roofing membrane
Bauder Ltd
Elastomer-bitumen torch on capping sheet with root-resistance according to FLL. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture.
BauderPVC ABL-R 110 Vertical outlet
Bauder Ltd
Bauder rigid PVC rainwater outlet (round).
A rigid PVC rainwater outlet enabling Thermofol membrane to be welded to the flange plate. UV stable throughout.
Only to be used as part of a full BauderTHERMOFOL Waterproofing System.
BauderPVC ABL-R 160 Vertical outlet
Bauder Ltd
Bauder rigid PVC rainwater outlet (round).
A rigid PVC rainwater outlet enabling Thermofol membrane to be welded to the flange plate. UV stable throughout.
Only to be used as part of a full BauderTHERMOFOL Waterproofing System.
BauderPVC ABL-R 75 Vertical outlet
Bauder Ltd
Bauder rigid PVC rainwater outlet (round).
A rigid PVC rainwater outlet enabling Thermofol membrane to be welded to the flange plate. UV stable throughout.
Only to be used as part of a full BauderTHERMOFOL Waterproofing System.
BauderPVC NLF-R 50 emergency overflow - Technical Data Sheet
Bauder Ltd
BauderROCK Flatboard Insulation
Bauder Ltd
BauderROCK is a dual density mineral wool insulation board with a multi-purpose facing applied to the top surface to allow waterproofing membranes to be mechanically fixed, torch-applied or adhered. The dual density composition provides a good compressive strength, whilst keeping the overall weight to a minimum. The product is non-combustible with superior acoustic performance.
The underside of the board is un-faced, so bare Rock. Where more than one layer of insulation is required to hit the target U Value, an un-faced base layer is used.
Only use within Bauder warm roof systems, particularly in applications where a non-combustible insulant is required or there is a demand for high noise reduction/absorption. Can be used with self-adhesive, torch-applied, adhered or mech-fixed membranes.
BauderROCK Tapered Insulation
Bauder Ltd
BauderROCK is a dual density mineral wool insulation board with a multipurpose facing applied to the top surface to allow waterproofing membranes to be mechanically fixed, torch-applied or adhered. The dual density composition
provides good compressive strength, whilst keeping the overall weight to a minimum. The product is non-combustible with superior acoustic performance.
The underside of the board is un-faced, so bare Rock. Where more than one layer of insulation is required to hit the target U Value, an un-faced base layer is used.
Thermal insulation to provide falls on a roof, for use within Bauder warm roof systems, where a non-combustible insulant is required or there is a demand for high noise reduction/absorption. Use with self-adhesive, torch-applied, adhered or mech-fixed membr
BauderSMARAGD Roofing membrane - Technical Data Sheet
Bauder Ltd
BauderSOLAR F XL - Technical Data Sheet
Bauder Ltd
technical data sheet for our BauderSOLAR F XL mounting system
BauderSOLAR G LIGHT Biosolar Mounting System - Technical Data Sheet
Bauder Ltd
Technical Data Sheet for our biosolar mounting system
BauderSYN DB-PE 100 Polyethylene AVCL
Bauder Ltd
Polyethylene air & vapour control layer to be loose laid under
BauderTHERMOFOL mechanically fastened installations.
BauderSYN GV 120 Glass fleece
Bauder Ltd
120 g/m² glass fleece to be used as a separating and fire protection layer for synthetic roofing systems.
Glass fleece should be used as a lower protection fleece in cold roof assemblies between substrate and fastened unbacked PVC membrane and as an over membrane protection sheet between PVC membrane and inverted insulation boards.
BauderTEC KSA DUO 35 Roofing membrane
Bauder Ltd
Elastomer bitumen self-adhesive underlayer with variable technology for lap sealing. The two side laps of the membrane have differing finishes. On one lap there is a self-adhesive finish, whist the opposite lap has a glass fleece.
This allows the membrane to be sealed with either a gas torch or hot air welder.
BauderTEC KSA DUO Roofing membrane
Bauder Ltd
Elastomer bitumen self-adhesive underlayer with variable technology for lap sealing. The two side laps of the membrane have differing finishes. On one lap there is a self-adhesive finish, whist the opposite lap has a glass fleece.
This allows the membrane to be sealed with either a gas torch or hot air welder.
BauderTEC KSD FBS Roofing membrane
Bauder Ltd
Elastomer bitumen air & vapour control layer, self-adhesive membrane. The lap of the membrane is equipped with a glass fleece to the underside. This allows the membrane to be sealed with either a gas torch or hot air welder.
Air & Vapour Control Layer for use in a warm roof flat roofing system.
BauderTEC KSD Foil Roofing membrane
Bauder Ltd
Elastomer bitumen air & vapour control layer, self-adhesive membrane, for use in a warm roof flat roofing system.
BauderTEC KSO ALP SN Roofing membrane - brown - Technical Data Sheet
Bauder Ltd
BauderTEC KSO SN Roofing membrane (Grey Slate)
Bauder Ltd
Elastomer bitumen self-adhesive capping sheet. The lap of the membrane is equipped with a glass fleece to the underside. This allows the membrane to be sealed with a hot air welder.
Capping sheet in a flat roof system. Used in 'torch-free' areas where a gas torch is prohibited.
BauderTEC KSO-P SN Roofing membrane (Charcoal Grey)
Bauder Ltd
Elastomer bitumen self-adhesive capping sheet. The lap of the membrane is equipped with a glass fleece to the underside. This allows the membrane to be sealed with a hot air welder.
Capping sheet in a flat roof system. Used in 'torch-free' areas where a gas torch is prohibited.
BauderTEC Sprint DUO Roofing membrane
Bauder Ltd
Elastomer bitumen self-adhesive underlayer with variable technology for lap sealing. The two side laps of the membrane have differing finishes. On one lap there is a self-adhesive finish, whist the opposite lap has a glass fleece. This allows the membrane to be sealed with either a gas torch or hot air welder.
Can be used adhered on a variety of appropriately prepared substrates and insulants.
BauderTHERM DS 1 DUO Roofing membrane
Bauder Ltd
Elastomer bitumen air & vapour control layer, self-adhesive with variable technology for lap sealing. The two side laps of the membrane have differing finishes. On one lap there is a self-adhesive finish, whist the opposite lap has a glass fleece. This allows the membrane to be sealed with either a gas torch or hot air welder.
Air & Vapour Control Layer for use in a warm roof flat roofing system. Top surface with heat-activated THERM-stripes for adhering certain insulation types.
BauderTHERMOFOL U 15 FR PVC Roofing membrane (Anthracite)
Bauder Ltd
Polyester reinforced PVC-P single ply roofing membrane.
Membrane can be mechanically fastened, adhered or loose-laid ballasted.
Can be used under green roof landscaping.
BauderTHERMOFOL U 15 FR PVC Roofing membrane (Blue Grey)
Bauder Ltd
Polyester reinforced PVC-P single ply roofing membrane.
Membrane can be mechanically fastened, adhered or loose-laid ballasted.
Can be used under green roof landscaping.
BauderTHERMOFOL U 15 FR PVC Roofing membrane (Light Grey)
Bauder Ltd
Polyester reinforced PVC-P single ply roofing membrane.
Membrane can be mechanically fastened, adhered or loose-laid ballasted.
Can be used under green roof landscaping.
BauderTHERMOFOL U 15 V FR Fleece-Backed PVC Roofing membrane (Light Grey)
Bauder Ltd
Polyester reinforced PVC-P membrane. A polyester fleece is laminated to the underside of the membrane in factory conditions.
Fleece-Backed membrane can be adhered, mechanically fastened or loose-laid ballasted. Can be used under green roof landscaping finish.
Showing 37-72 of 89