Juta UK Ltd
Ground Gas Protection Experts - Best Products, Best Service, Best Price
A-Z
Showing 37-58 of 58
JUTA GP® Void Vent - Installation Guidance
Juta UK Ltd
JUTA GP® Void Vent - Installation Guidance Notes
JUTA GP® Void Vent - TDS
Juta UK Ltd
JUTA GP® Void Vent is a cuspated HDPE core with a geotextile filter/separator bonded to a single side, in either 25mm or 40mm depth. The intended use of the Void Vent is to provide a means of ventilation when used in conjunction with an approved Gas Protection Barrier, in accordance with the recommendation(s) contained within NHBC Guidance and BS8485:2015 + A1 2019.
JUTA GP®1 SAM (Gas Protection - Self Adhesive Membrane)
Juta UK Ltd
JUTA GP®1 SAM Gas Protection Self Adhesive Membrane, is a bituminous gas proof and water proof sheet, composed of self-adhesive SBS polymer modified bitumen incorporating GP®1 with an upper surface finish of Black reinforced LDPE, and a lower surface finish of siliconized release film. JUTA GP®1 SAM is used for the gas/waterproofing of underground structures where harmful ground gasses are anticipated, and as a self-adhesive accessory to GP®1.
JUTA GP®H 0.6mm
Juta UK Ltd
Technical Data Sheet
JUTA HDPE 0.6mm
Juta UK Ltd
HDPE 0.6mm is a mono layer, High-density polyethylene membrane specifically designed and manufactured to perform as a robust waterproofing barrier protection system, which is suitable for use in various demanding geomembrane applications such as SUDS, Root Barrier, Waterproofing and Radon Protection and Permeable Paving.
HDPE 0.6mm is a fully weldable, category 2 attenuation grade liner fully conformant to C753 and BS7533-13 and is CE marked for use in the following application areas: EN13967 (A/T).
JUTA Hydrolock
Juta UK Ltd
JUTA Hydrolock - is a mechanically bonded Geosynthetic Clay Liner (GCL) composite of pulverised bentonite embedded between two layers of geotextile. The internal natural sodium bentonite swells in contact with water to form a low permeability waterproofing barrier.
JUTA Hydrolock - Technical Datasheet
Juta UK Ltd
JUTA Hydrolock - Technical Datasheet
JUTA Hydrolock 2
Juta UK Ltd
JUTA Hydrolock 2 - is a mechanically bonded Geosynthetic Clay Liner (GCL) composite of pulverised bentonite embedded between two layers of geotextile. The internal natural sodium bentonite swells in contact with water to form a low permeability waterproofing barrier.
JUTA Junifol HDPE
Juta UK Ltd
JUTA Junifol - HDPE is a High-density polyethylene membrane for use in accordance with harmonised standards:
BS EN 13361/ BS EN 13362/ BS EN 13492/ BS EN 13493/ BS EN 15382
JUTA Junifol LLDPE
Juta UK Ltd
JUTA Junifol LLDPE is a linear low-density polyethylene membrane for use in accordance with harmonised standards:
BS EN 13361/ BS EN 13362/ BS EN 13491/ BS EN 13492/ BS EN 13493/ BS EN 15382
JUTA PD 1700
Juta UK Ltd
JUTA PD 1700 is a high compressive strength cuspated high density polyethylene (HDPE) drainage core with a geotextile filter bonded to one side. Protection Drainage (PD) 1700 is designed as a high flow medium to alleviate hydrostatic pressure on below ground structures as well as providing protection to underlying gas and waterproofing membranes.
JUTA PHS - Pile Head Sealer
Juta UK Ltd
JUTA UK Pile Head Sealer (PHS) is a crystalline cementitious waterproof slurry which creates a monolithic bond to the structure and seals the pile head. When mixed with clean water and applied correctly, it is designed to form a permanent waterproof coating to concrete piles in accordance with BS8102:2009.
JUTA Self Adhesive Gas Barrier Installation Guidance
Juta UK Ltd
This document provides guidance on the installation of JUTA Self-Adhesive Membranes. It includes general installation notes, application methods and diagrams to assist with detailing of all JUTA SAM products.
JUTA UK - Design Guidance - Gas Barriers
Juta UK Ltd
This document is aimed at providing guidance for the use of Protective measures for Ground Gas (Methane, Carbon Dioxide and
Radon), VOC, and moisture protection, for new buildings, and remediation for existing buildings. The guidance contained within is based on the most up to date standards and guidance contained within CIRA, BRE, NHBC guidance documents and BS8485:2015+A1(2019).
JUTA UK GP Void Vent & Vent Box Installation Guidance
Juta UK Ltd
This document provides guidance on the installation of JUTA Void Vent, Vent Box and Accessories. It includes general installation notes, application methods and diagrams to assist with detailing of all ventilation products.
JUTA UK GP® Titanflex - Technical Datasheet
Juta UK Ltd
JUTA UK GP® Titanflex - Technical Datasheet
GP® TITANFLEX - Gas and Hydrocarbon Barrier is a multi layer, polyethylene membrane.
GP® TITANFLEX is specifically designed and manufactured to perform as a Methane, Carbon Dioxide, Radon, Ground Gas, VOC, air & Moisture, and Hydrocarbon protection system.
JUTA UK GP®H
Juta UK Ltd
JUTA GP®H High Performance SUDS, Permeable paving, Hydrocarbon and Gas Barrier is a mono layer, High-density polyethylene membrane specifically designed and manufactured to perform as a robust Hydrocarbon protection system, which is suitable for use in various demanding geomembrane applications where Hydrocarbons are present. GP® H Is chemically resistant to a range of Hydrocarbons, acids and aggressive ground salts, providing a solution for a range of demanding applications.
JUTA WP-SAM (Waterproof - Self Adhesive Membrane)
Juta UK Ltd
JUTA WP-SAM (Waterproof - Self Adhesive Membrane): is a bituminous water proof sheet, composed of self-adhesive SBS polymer modified bitumen with an upper surface finish of grey co-extruded polyolefin, and a lower surface finish of siliconized release paper. JUTA WP-SAM is used for the waterproofing of underground structures, and to prevent the ingress of RADON.
JUTA X20 CDM - Cavity Drain Membrane
Juta UK Ltd
JUTA UK X20 CMD An 20mm thick Studded Cavity Drainage Membrane, suitable for TYPE C waterproofing in accordance with BS 8102:2009, to provide a GRADE 3 environment.
JUTA X8 CDM - Cavity Drain Membrane
Juta UK Ltd
JUTA UK X8 CMD An 8mm thick Studded Cavity Drainage Membrane, suitable for TYPE C waterproofing in accordance with BS 8102:2009, to provide a GRADE 3 environment.
JUTAMAT 5000 - GCL
Juta UK Ltd
JUTAMAT 5000 Is a Mechanically bonded Geosynthetic Clay Liner (GCL) composite of pulverised bentonite embedded between two layers of geotextile. Additional bentonite is added to the overlap edges for ease of sealing.
JUTA UK JUTAMAT 5000 complies with the latest codes of practice as published in LFE 3 - Using Geosynthetic Clay Liners in Landfill Engineering
Premier Guarantee
Juta UK Ltd
PG - Approval certificate
Showing 37-58 of 58