18907 ES SV Electrically Coupled

​For doors with electrically controlled lever handle operation in residential and commercial buildings. The panic C function with split lock follower and separated lever handle control (outside/inside) offers the combination of access control and escape route. Access is controlled via an identification system (e.g. badge) or the cylinder.

Note: The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder. Do not use a reduction sleeve for the follower/square spindle. No external, mechanical bolt-switch contact is recommended. Only use the 5920 HESO panic spindle. Mount lever handles rotatably fixed on plates/ rosettes (easyfix®). EN 14846: set 11105 MS required.

Features and benefits:

• Split three-part lock follower; square 9 mm.
• Self-locking with sequence control and latch blocking.
• Electrically couplable external lever handle.
• Emergency opening via the cylinder (forced locking function).
• Panic C: panic side reversible inwards/ outwards.
• Monitoring contacts: lever handle L/R, deadbolt and door status, cylinder integrated.
• Method of operation: standby/ operating current can be switched (DIP switch).
• Opening impulse protected against tampering: can be switched on/ off (DIP switch).
• Connection cable (not in scope of supply): 12-pin; 10/20 m; 0.14 mm2.
• Operating voltage: 12/24 V d.c. +/-15%; 100/50 mA.
• Inputs: 12/24 V d.c. at GND.
• Outputs: potential free; loading capacity 30 V d.c./100 mA.
• Hardened deadbolt; 20 mm throw.
• Dampened, reversible DIN L/R comfort latch.
• Suitable for rotary knob cylinders​.
• Follower turning angle 35°​.