18908 ES SV Electrically Coupled Both Sides

Mortice lock, self-locking, electric coupling on both sides The lever handles L or R can be separately electrically coupled or decoupled, permanently if required. Entry and exit is controlled via an identification system (e.g. badge) or the cylinder. By holding the cylinder, both lever handles can be temporarily coupled or decoupled (emergency opening) simultaneously.

Note: ​The cylinder screw is not centred in the forend. To determine the cylinder lengths: centre of forend = centre of lock cylinder. Do not use asymmetric cylinders with "L-cam". Do not use a reduction sleeve for the follower/square spindle. No external, mechanical bolt-switch contact is recommended. Only use the 5920 HESO panic spindle. Mount lever handles rotatably fixed on plates/rosettes (easyfix®). The 11105 MS-Set must be used to operate the lock.

Features and benefits:

• Split three-part lock follower; square 9 mm.
• Self-locking mortice lock with sequence control and latch blocking.
• Lever handles L or R separately electrically couplable on both sides.
• Emergency opening via the cylinder (forced locking function).
• Monitoring contacts: lever handle L/R, deadbolt and door status, cylinder integrated.
• Method of operation: standby/operating current for lever handle L/R can be switched (DIP switch).
• Opening impulse permanently protected against tampering.
• Connection cable (not in scope of supply): 12-pin; 10/20 m; 0.14 mm2.
• Operating voltage: 12/24 V d.c. ±15%; 200/100 mA.
• Inputs: 12/24 V d.c. at GND.
• Outputs: loading capacity 30 V d.c./100 mA.
• Hardened deadbolt; 20 mm throw​.
• Dampened, reversible DIN L/R comfort latch.
• ​Suitable for rotary knob cylinders.