18970HZ MINT SV ELK PC Electrically Coupled

Multi-point lock with U-shaped forend, feedback contacts, integrated self-locking, latch blocking and sequence control. The Panic C function with split lock follower and separate lever handle control (outside/ inside) offers the combination of access control and escape route. Access is controlled via an ID-system (e.g. badge) or the cylinder.

Note: Cylinder screw is not in the centre of the forend. To determine the cylinder lengths: Centre of forend = centre of lock cylinder. No reduction sleeves are permitted for the lock follower/mandrel. Only use internal bolt switching contact. Only use the 5920/ 59105 HESO panic square spindle. Keep lever handle on escutcheons/rosettes for rotation (easyfix®). Tamper protection according to EN 14846: Set 11105 MS required.

Features and benefits:

• Solid 20 mm bolt on secondary boxes (20 kN).
• Three-part, split lock follower; 4-ct. 9 mm.
• Electrically couplable outside handle.
• Emergency opening via cylinder (forced closing function).
• Panic C: Panic side can be changed in/ out.
• Monitoring contacts: lever handle L/R, bolt and door status, cylinder integrated.
• Operating mode: idle/ working current can be changed over (DIP switch).
• Opening impulse protected against manipulation: can be switched on/ off (DIP switch).
• Operating voltage: 12/24 V d.c. ±15%; 100/50 mA.
• Inputs: 12/24 V d.c. to GND.
• Outputs: potential-free; load capacity 30 V d.c./ 100 mA.
• Slide lock: top/ bottom mechanical.
• Damped, DIN L/R convertible comfort latch.
• Suitable for rotary knob cylinders.
• Follower turning angle 35°.