NBS Source
I'm a manufacturer

Active Floor - Sports Floor

Verified by manufacturer 15 days ago

Reflex Sports Ltd Third party certifications:
  • Chain of Custody Certification

    Chain of Custody Certification

    Certificate type

A low height, area elastic timber sports floor.

Jump to:
BOS
+44 (0)1932 563138 Website

Application

Suitable for renovations and new build projects. This system provides high levels of shock absorption and uniform performance across the floor.


Active floor has a cross layered construction, making it very stable yet strong.


The finish is in European Oak and Ash timbers and is protected by the ultra sport lacquer. This is hard wearing and offers the correct levels of friction and slip resistance for all sporting activities.


The floor can be line marked with our specialist line marking paints and there is no requirement for additional on site applications of lacquer.


Reflex have numerous reference sites throughout the U.K. and mainland Europe.

Description

Reflex Active Floor is a sprung timber sports floor with the absorption material and reinforcements already fitted to the underside of the board to create an all-in-one solution.


The system features the smart-fit dry jointing system to provide gap free installation between the boards. The result is an even surface with optimal shock protection, counteracting injuries when running, landing or falling during intense activity.


Features and benefits:

  • 28 mm low finished floor height.
  • Factory finished, UV cured lacquer.
  • Fully Sport England compliant.
  • Can be uplifted and re-laid if required.
  • Suitable for room sizes up to 400 m².
  • PEFC® chain of custody certification available on ash species.

General information

Color

Brown

Beige

Other

Finish

Lacquered

Material

Timber

Wood

Foam

High-density fibreboard (HDF)

Length

2250 mm

Width

190 mm

Height

28 mm

Warranty description

20 year

Uniclass

Ss_30_20_95_95 Wood floating floor systemsPrimary

CAWS

K21/10 Wood laminate flooring

K21/111 Wood floating floor

Specification data - Wood floating floor systems

System performance

Standards: Certified to EN 14904 - Area Elastic A3.
Shock absorption: 51%
Vertical deformation: 2 mm.
Ball rebound: 99%
Slip resistance: 80–110.
Resistance to rolling load: ≥1500 N.
Resistance to wear: >80 mg.

Subfloor preparation layer

To conform to BS 8204-1:1987 and should not deviate more than 3 mm under a 2 m straight edge, having a suitable damp proof membrane.

Vapour control layer

One layer of 1200-gauge slip membrane to be installed on top of cementitious base.

Guidance for specification option:

Damp proof membrane may be required dependant on site readings.

Underlay

Resilient foam and spring fixed to the underside of the board.

Guidance for specification option:

For energy absorption.


Flooring

-

Board type

190 x 2250 x 28 mm prefinished three ply engineered boards with 3.6 mm nominal hardwood wear surface.

Guidance for specification option:

  • Width x length x 28 mm finished floor height system.
  • Wear surface cross layered to give dimensional stability.
  • Factory finished, UV cured lacquer.
  • Overlapping pressure distribution with HDF board across joints on long sides and ends.
  • Resilient foam for energy absorption and spring is fixed to the underside of the board.

Jointing

Woodloc® smart-fit dry jointing system.

Perimeter flanking seal

Proprietary supports are to be utilised around the perimeter and around any obstructions.

System accessories

None.

Access bushings.

Carpet tile floor protection.

Sports skirting.

Door threshold trims.

Sports line marking and logos.

Samples required

-

Manufacturer guidance

Samples are available; insert requirements or omit.

Third-party certification

Not required.

PEFC.

Guidance for specification option:

PEFC® Chain of Custody Certification is available on Ash species.

Surface finish

Factory applied sports lacquer adhering to EN 2813. Specular gloss >45.

Sustainability data

Contains Red List materials

No

Country of material origin

Europe

Country of product manufacture

Europe

Material

Timber

Wood

Foam

High-density fibreboard (HDF)

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit
-

1

IFC
-

1

Third party certifications

Chain of Custody Certification

Chain of Custody Certification

PEFC Chain of Custody Certification

Literature

Reflex ActiveFloor

Reflex ActiveFloor

Similar products from Reflex Sports Ltd

Action Flex - Sports Floor

Action Flex - Sports Floor