NBS Source
I'm a manufacturer

ADCOR® 550MI - Hydrophilic Waterstop

Verified by manufacturer 2 months ago

GCP Applied Technologies Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

Double protection system for construction joints using 2-in-1 pre-applied, post injectable hydrophilic waterstop.

Jump to:
BOS
+44 (0)1753 490000 Website

Application

  • Construction joints for in-situ concrete structures.
  • Casting new concrete against existing concrete.
  • Floor slabs cast against diaphragm retaining walls, steel sheet piles and secant piled walls.
  • Joints between floor slabs and pile caps.
  • Remedial 'breaking out' of concrete.

Description

A combined active and passive waterstop system with built in redundancy for the secure sealing of concrete construction joints subject to hydrostatic pressure. It comprises an outer hydrophilic sleeve activated in contact with water (active) for sealing the joint, and a reinforced injection tube for remedial treatment by resin injection (passive).


Features and benefits:

  • Hydrophilic waterstop: voumetric expansion (100% minimum) in cement water.
  • No deterioration or premature swelling of hydrophilic injection hose.
  • Easy installation.
  • Non-polluting to ground water.
  • Retains cohesive strength at both original and expanded volume.
  • No need for protective steel mesh.
  • Conformable – can be installed onto a variety of irregular substrates.
  • Reinforced inner tube prevents damage to resin path.
  • Resists at least 5 bar (50 m) hydrostatic pressure.

General information

Color

Blue

Finish

Other

Material

Polymer

Shape

Circle

Length

5000 mm

Width

14 mm

Height

14 mm

Warranty description

Ten year

Uniclass

Pr_35_90_15_42 Injectable hose waterstopsPrimary

CAWS

E40/320 Hydrophilic waterstops

Specification data - Injectable hose waterstops

Certification

BBA Agrément Certificate.

Injection material

Resin.

Guidance for specification option:

With varying viscosities.

Density

1.48 kg/m³.

Application temperature range

-15˚C to 60˚C.

Weight

14.4 kg.

Swelling capability

Swells up to min.100% of its original dry volume.

Water pressure resistance

Up to 5 bar (50 m).

Tensile strength

1800 N/mm².

Guidance for specification option:

Approximately.

Manufacturer guidance

Properties of the injection tube.

Steel wire tensile strength.

Accessories

Not required.

Adcor 550MI Twinbox.

Adcor 550MI Formholder.

Adcor Mastic.

Sustainability data

Country of product manufacture

Belgium

Material

Polymer

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
IFC
-

1

Revit
-

1

Third party certifications

BBA Agrément Certificate

BBA Agrément Certificate

13/5006