NBS Source
I'm a manufacturer

Ancon Cavity Wall Lintels

Verified by manufacturer 4 months ago

Leviat

Stainless steel lintels for cavity walls.

Jump to:
+44 (0) 114 275 5224 Website

Application

  • Suitable for most domestic and commercial developments and framed structures.
  • Lintels should be firmly bedded in mortar with a minimum 150 mm end bearing onto a full brick or block. Consult Ancon when using limited bearing. The front and back of the lintel must be level before proceeding and a separate DPC incorporated if required.
  • The inner and outer leaves should be raised together to avoid twisting the lintel; blocks should continue for the full length of the inner flange. Masonry should have a maximum overhang of 25 mm and blockwork should be built as close as possible to the upstand. Point loads should be applied at least 150 mm above lintel flanges.
  • Although the lintels have a drip edge on the external flange to shed moisture, the junction of the window head and lintel should be sealed with a suitable mastic, to prevent driving rain penetration. Weep vents should be provided above lintels at maximum 450 mm centres. Each opening should have at least two weep holes and stop ends are required to prevent moisture penetration.
  • Long spanning lintels will require propping during installation to limit deflections.

Description

A stainless steel lintel for cavity walls.


Features and benefits:

  • Perforations in the inner flange offer an integral plaster key.
  • SH lintels require a separate dpc, while SU and SUX lintels have a built in DPC.
  • Manufactured from Austenitic stainless steel and will not require any further corrosion protection.

General information

Color

Silver

Material

Stainless steel

Uniclass

Pr_20_85_48_84 Stainless steel lintelsPrimary

CAWS

F30/755 Prefabricated steel lintels

F30/85 Prefabricated steel lintels

Product range

Lintels

Specification data - Stainless steel lintels

Standard

CE marked and BS EN 845-2.

Manufacturer guidance

A Declaration of Performance is available at www.ancon.co.uk/CE.

Characteristics

-

Thermal conductivity

Guidance for specification option:

The thermal transmittance of the wall depends on the thermal characteristics of the individual components. Ancon Cavity Wall Lintels allow for continuity of construction down to window head level.

Insulation

Not required.

Required.

Guidance for specification option:

Where required, Cavity Wall Lintels are supplied insulated with high-density polystyrene, manufactured in accordance with BS 3837-1:2004 to be CFC-free with an ozone depletion potential (ODP) of zero.

Lintel

Guidance for specification option:

Insert reference number or refer to schedule.

Manufacturer guidance

– SH50:

  • Cavity width 50–65 mm.
  • Inner leaf 100–115 mm.
  • Length: 750–3600 mm.


– SH50E:

  • Cavity width 50–65 mm.
  • Inner leaf 125–140 mm.
  • Length: 750–3000 mm.


– SH70:

  • Cavity width 70–85 mm.
  • Inner leaf 100–115 mm.
  • Length: 750–3600 mm.


– SH70E:

  • Cavity width 70–85 mm.
  • Inner leaf 125–140 mm.
  • Length: 750–3000 mm.


– SH90:

  • Cavity width 90–105 mm.
  • Inner leaf 100–115 mm.
  • Length: 750–3600 mm.


– SH90E:

  • Cavity width 90–105 mm.
  • Inner leaf 125–140 mm.
  • Length: 750–3000 mm.


– SH110:

  • Cavity width 110–125 mm.
  • Inner leaf 100–115 mm.
  • Length: 750–3600 mm.

– SH110E:

  • Cavity width 110–125 mm.
  • Inner leaf 125–140 mm.
  • Length: 750–3000 mm.


– SH130:

  • Cavity width 130–145 mm.
  • Inner leaf 100–115 mm.
  • Length: 750–3600 mm.


– SH130E:

  • Cavity width 130–145 mm.
  • Inner leaf 125–140 mm.
  • Length: 750–3000 mm.


– SH150:

  • Cavity width 150–165 mm.
  • Inner leaf 100–115 mm.
  • Length: 750–3600 mm.


– SH150E:

  • Cavity width 150–165 mm.
  • Inner leaf 125–140 mm.
  • Length: 750–300 mm.


– SU50:

  • Cavity width 50–65 mm.
  • Inner leaf 100–115 mm.
  • Length: 900–2400 mm.


– SU50E:

  • Cavity width 50–65 mm.
  • Inner leaf 125–140 mm.
  • Length: 900–2400 mm.


– SU70:

  • Cavity width 70–85 mm.
  • Inner leaf 100–115 mm.
  • Length: 900–2400 mm.


– SU70E:

  • Cavity width 70–85 mm.
  • Inner leaf 125–140 mm.
  • Length: 900–2400 mm.


– SU90:

  • Cavity width 90–105 mm.
  • Inner leaf 100–115 mm.
  • Length: 900–2400 mm.


– SU90E:

  • Cavity width 90–1050 mm.
  • Inner leaf 125–140 mm.
  • Length: 900–2400 mm.


– SU110:

  • Cavity width 110–125 mm.
  • Inner leaf 100–115 mm.
  • Length: 900–2400 mm.


– SU110E:

  • Cavity width 110–125 mm.
  • Inner leaf 125–140 mm.
  • Length: 900–2400 mm.


– SU130:

  • Cavity width 130–145 mm.
  • Inner leaf 100–115 mm.
  • Length: 900–2400 mm.


– SU130E:

  • Cavity width 130–145 mm.
  • Inner leaf 125–140 mm.
  • Length: 900–2400 mm.

– SU150:

  • Cavity width 150–165 mm.
  • Inner leaf 100–115 mm.
  • Length: 900–2400 mm.

– SU150E:

  • Cavity width 150–165 mm.
  • Inner leaf 125–140 mm.
  • Length: 900–2400 mm.


– SUX50:

  • Cavity width 50–65 mm.
  • Inner leaf 100–115 mm.
  • Length: 900–4800 mm.


– SUX50E:

  • Cavity width 50–65 mm.
  • Inner leaf 125–140 mm.
  • Length: 900–4800 mm.


– SUX70:

  • Cavity width 70–85 mm.
  • Inner leaf 100–115 mm.
  • Length: 900–4800 mm.


– SUX70E:

  • Cavity width 70–85 mm.
  • Inner leaf 125–140 mm.
  • Length: 900–4800 mm.


– SUX90:

  • Cavity width 90–105 mm.
  • Inner leaf 100–115 mm.
  • Length: 900–4800 mm.


– SUX90E:

  • Cavity width 90–105 mm.
  • Inner leaf 125–140 mm.
  • Length: 900–4800 mm.

– SUX110:

  • Cavity width 110–125 mm.
  • Inner leaf 100–115 mm.
  • Length: 900–4800 mm.


– SUX110E:

  • Cavity width 110–125 mm.
  • Inner leaf 125–140 mm.
  • Length: 900–4800 mm.


– SUX130:

  • Cavity width 130–145 mm.
  • Inner leaf 100–115 mm.
  • Length: 900–4800 mm.


– SUX130E:

  • Cavity width 130–145 mm.
  • Inner leaf 125–140 mm.
  • Length: 900–4800 mm.


– SUX150:

  • Cavity width 150–165 mm.
  • Inner leaf 100–115 mm.
  • Length: 900–4800 mm.


– SUX150E:

  • Cavity width 150–165 mm.
  • Inner leaf 125–140 mm.
  • Length: 900–4800 mm.


Sustainability data

Contains Red List materials

Yes

Guidance for specification option:

Where required, Cavity Wall Lintels are supplied insulated with high-density polystyrene, manufactured in accordance with BS 3837-1:2004 to be CFC-free with an ozone depletion potential (ODP) of zero.

Literature

Masonry Support Systems and Lintels

Masonry Support Systems and Lintels

Similar products from Leviat

Ancon Channel Lintel - Stainless Steel Lintels

Ancon Channel Lintel - Stainless Steel Lintels

Ancon Single Leaf Lintel

Ancon Single Leaf Lintel

© 2024 NBS Enterprises Ltd. All rights reserved.