Verified by manufacturer 4 months ago
Lockable dowels used at temporary movement joints in post-tensioned concrete.
Suitable for use to transfer shear and accommodate an initial phase of movement in pre-tensioned concrete before being locked.
In most cases dowelled or keyed joints can be replaced by joints incorporating shear load connectors. These connectors are more effective at transferring load and allowing movement to take place. They are easier to fix on site and can prove a more cost effective solution.
Connectors can be used for movement joints in floor slabs, suspended slabs, and for replacing double columns and beams at structural movement joints.
Color | Silver |
Material | Stainless steel |
Uniclass | |
CAWS | E30/240 Proprietary prefabricated reinforcement E40/440 Load transfer systems E42/335 Shear Load Connectors |
Product range |
Product Reference | DSD shear load connectors Guidance for specification option:
DSDQ shear load connectors Guidance for specification option:
E-HLD shear load connectors Guidance for specification option:
ESD shear load connectors Guidance for specification option:
ESDQ shear load connectors Guidance for specification option:
Manufacturer guidance- ESDQ-L20 Lockable dowel: The dowel component is manufactured from 30 mm diameter Duplex stainless steel; one end is threaded with a fixed nut and washer, and the other features a series of grooves to accept the Locking Plate. The cylindrical sleeve which accepts the dowel component is contained within a box-section to allow lateral, longitudinal and some rotational movement. The epoxy resin is poured into the L-shaped void former. This product has a design capacity of almost 70kN. - ESDQ-L20W Lockable dowel: As ESDQ-L20, but shorter dowel. One end of the dowel is designed to fix into the stainless steel Ancon SKS24 Threaded Anchor cast into the face of the concrete and the other end features a series of grooves to accept the Locking Plate. The sleeve component is the same as used in the ESDQ-L20. - HLDQ-L30 Lockable dowel: The HLDQ-L30 is a high load lockable dowel with a design capacity of up to 136kN. |
Code | Not applicable. 18. Guidance for specification option: E-HLD only. 22. Guidance for specification option: E-HLD only. 24. Guidance for specification option: E-HLD only. 25. Guidance for specification option: DSD only. |
Dowel | ADD75/10. Guidance for specification option: Ancon Dominator Dowel. AHM 100/10. Guidance for specification option: Ancon Hi-Move Dowel. ESDQ-L20. Guidance for specification option: Lockable dowel. For use with ESDQ shear load connectors. Slab-to-slab applications. ESDQ-L20W. Guidance for specification option: Lockable dowel. For use with ESDQ shear load connectors. Slab-to-wall applications. HLDQ-L30. Guidance for specification option: High load lockable dowel. |
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
Platform | Compatible | Version |
---|---|---|
- | 1 | |
- | 1 | |
- | 1 | |
- | 1 | |
- | 1 |