Verified by manufacturer 8 months ago
CCPI System
Certificate type
BBA Agrément Certificate
Certificate type
EPD
Certificate type
Fast-curing polymethyl methacrylate (PMMA) resin system reinforced with polyester fleece, suitable for both new build or refurbishment applications for cold, warm and inverted constructions.
LiquiTEC is a fast-curing, two-coat, wet-on-wet system particularly suited to areas where there is a high degree of detailing, or when access to install waterproofing is restricted.
Cold liquid-applied, inverted roof system suitable for new build, refurbishment and green roof applications. It is compatible with most existing waterproofing products, making it suitable for use as an overlay system. The system is appropriate for both new build or refurbishment applications for cold, warm, and inverted roof constructions. The system can be used as exposed roof waterproofing or as a roof terrace when protected by hard landscaping as well as extensive and intensive green roof systems. The system can be used in zero falls applications in protected roof situations.
Plus points:
Verified properties:
Color | Grey Guidance for specification option: LiquiFINISH, Blue grey (RAL 7031). LiquiFINISH, Stone grey (RAL 7030). LiquiFINISH, Traffic grey (RAL 7043). Manufacturer guidanceBauder LiquiDEK is Blue Grey (RAL 7031). |
Finish | Smooth |
Material | Polymethyl methacrylate (PMMA) Manufacturer guidanceLiquid applied polymethyl methacrylate membrane. |
Shape | Formless Guidance for specification option: Liquid. |
Warranty description | Manufacturer guidanceA comprehensive range of guarantee options are available. Please contact your local Bauder Area Technical Manager for more information. |
Uniclass | |
CAWS | J31/130 Inverted roof coating J31/12 Inverted roof coating |
Preparation | |
Horizontal work | Bauder LiquiPRIME 1.Guidance for specification option: A cold liquid-applied, fast-curing primer, for use when installing the Bauder LiquiTEC system over timber, asphalt, and bitumen-based substrates. The product is a poly(methyl methacrylate) (PMMA)-based resin, and requires the addition of a catalyst to trigger curing. It is solvent, isocyanate and halogen-free, minimizing its environmental impact.
Bauder LiquiPRIME 2.Guidance for specification option: A cold liquid-applied, fast-curing primer, for use when installing the Bauder LiquiTEC system over brick, block and cementitious-based substrates. The product is a poly(methyl methacrylate) (PMMA)-based resin, and requires the addition of a catalyst to trigger curing. It is solvent, isocyanate and halogen-free, minimizing its environmental impact.
|
Skirtings and vertical work | As 'Horizontal work'. |
Liquid-applied waterproofing | |
Type | LiquiDEK, Blue grey (RAL 7031).Guidance for specification option: As standard. Cold liquid-applied, fast-curing waterproofing resin. LiquiFINISH, Stone grey (RAL 7030).Guidance for specification option: A fast curing cold applied liquid final coat. LiquiFINISH, Traffic grey (RAL 7043).Guidance for specification option: A fast curing cold applied liquid final coat. LiquiFINISH, Blue grey (RAL 7031).Guidance for specification option: A fast curing cold applied liquid final coat. Manufacturer guidanceLiquiDEK: A cold liquid-applied, fast-curing waterproofing resin, for use on the main roof area of the LiquiTEC Roof/ Terrace system. It is applied in two coats, ‘wet-on-wet’, with a layer of Bauder 110 g/m² reinforcement fleece fully embedded in the first coat. The product is a poly(methyl methacrylate) (PMMA) based resin, and requires the addition of a catalyst to trigger curing. It is solvent, isocyanate and halogen-free, minimizing its environmental impact.
|
Reinforcement | Bauder 110 g Reinforcement Fleece. |
Insulation | |
Type | Bauder JFRI PREMIUM+ Inverted Insulation.Guidance for specification option: Insert required thickness, 85–240 mm in 5 mm increments.
Designed specifically for inverted roof applications.
Consult manufacturer's literature for further details. Bauder JFRI PREMIUM (300) Inverted Insulation.Guidance for specification option: Insert required thickness, 90–240 mm in 5 mm increments.
Designed specifically for inverted roof applications.
Consult manufacturer's literature for further details. Bauder XPS (300) Inverted Insulation Flatboard.Guidance for specification option: Insert required thickness.
Bauder XPS (500) Inverted Insulation Flatboard.Guidance for specification option: Insert required thickness.
|
Fixing | Loose laid (and suitably ballasted).Guidance for specification option:
|
Water control layer | Bauder JFRI WFRL.Guidance for specification option: Flexible and breathable sheet of polypropylene strands randomly spun-bound together, supplied as part of the JFRI Inverted Insulation system. Supplied as part of the JFRI Inverted Insulation system to minimize water flow through and below the insulation.
Bauder XPS WFRL.Guidance for specification option: Flexible and breathable geotextile membrane of polypropylene strands randomly spun-bound together, supplied as part of the Bauder XPS GG Inverted Insulation system. Supplied as part of the XPS GG Inverted Insulation system to minimize water flow through and below the insulation.
Manufacturer guidanceWater Flow Reducing Layer/ Vapour Permeable Membrane. Designed to minimize water flow through and below the insulation, therefore improving thermal performance. |
System accessories | Not required.Bauder 100/60 GRP Trim Angle.Guidance for specification option: GRP roof edge trim for use with Bauder Cold Applied Liquid Waterproofing systems where the system is terminated at perimeter details, such as drip edges, watercheck kerbs or parapets.
Note: The trim may be used either way round as required.
Installation:
Bauder Aluminium Termination Bar.Guidance for specification option: Natural finish aluminium alternative to a lead counterflashing, for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall. Bauder GRP Termination Bar.Guidance for specification option: Black glass-reinforced plastic (GRP) alternative to a lead counterflashing, for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall. Bauder lightning conductors.Guidance for specification option: Lightning conductor clips are specially designed, secure clips that allow for movement.
Bauder LiquiDETAIL (Blue grey RAL 7031).Guidance for specification option: Cold liquid-applied, fast-curing waterproofing resin that can be used on upstands and details. PMMA-based resin that requires the addition of catalyst to trigger curing, and is solvent, isocyanate and halogen-free. Bauder rooflights/ glazing/ ventilation.Guidance for specification option: All these glazing products are fully compatible with the roof waterproofing systems. Consult manufacturer for details and insert requirements.
BauderPVC ABL-R PVC Rigid Outlet.Guidance for specification option: A rigid PVC outlet that can be used with Bauder LiquiTEC and LiquiTOP cold-applied liquid systems. |
Separation layer | BauderGREEN FV 125 Filter Fleece. |
Contains Red List materials | No |
Country of material origin | Germany |
Country of product manufacture | Germany |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | Manufacturer guidancePlease refer to EPD on the Bauder website. |
BauderPVC ABL-R 75 Vertical outlet
BauderPVC ABL-R 160 Vertical outlet
BauderPVC ABL-R 110 Vertical outlet
BauderPVC NLF-R 50 emergency overflow - Technical Data Sheet
Bauder 110g Reinforcement Fleece
Bauder LiquiDEK
Bauder LiquiDETAIL
Bauder LiquiFIBRE
Bauder LiquiFINISH
Bauder Quartz
Bauder waterproofing systems are now CCPI verified.
Cold Applied Liquid Systems - Bauder brochure
CPD Seminars - Bauder
Flat Roof Design Considerations - Bauder
New Build Flat Roof Solutions - Bauder brochure
Refurbishment Flat Roof Solutions - Bauder brochure
Bauder LiquiPRIME 1 - Technical Data Sheet
Bauder LiquiPRIME 2 - Technical Data Sheet
Bauder Catalyst - Technical Data Sheet