Verified by manufacturer 2 months ago
A Sedum Blanket extensive green roof system with integrated water retention and filter layer.
Suitable for both new build construction and retrofit refurbishment projects.
A Sedum Blanket extensive green roof system with integrated water retention and filter layer. This is our lightest weight all-in-one system available. It comprises mature Sedum on 20 mm of extensive substrate and incorporates a multifunctional water retention and filter layer. The system is suitable for both new build construction and retrofit refurbishment projects. In most instances an additional drainage layer is not required although on roofs up to and including 1° or in areas of high rainfall, its inclusion may be necessary.
BauderGREEN XF 301 lightweight sedum system has passed BROOF(t4) and has a fire rating of Ext. F.AA (flat roofs) and Ext. S.AA (sloped roofs) when tested to BS 476 Part 3:2004.
Features and benefits:
Color | Green |
Shape | Rectangle |
Length | 2000 mm Guidance for specification option: Long roll sizes (for use with crane attachment): 1 x 5–10 m. |
Width | 1000 mm |
Height | 28 mm |
Uniclass | |
CAWS | Q37/130 Extensive green roof |
Product range |
Protection | |
Protection layer | BauderGREEN SV 600 protection and moisture mat.Guidance for specification option: Where required (usually on dual pitched roofs, or higher pitched roofs - loose laid centrally along ridges to provide extra moisture retention and waterproofing protection. |
Moisture control | |
Drainage layer | BauderGREEN SDF drainage and protection mat.Guidance for specification option: Lightweight, multi-directional drainage layer. Used on roofs 0–1° finished falls provided there are no back falls and no danger of ponding water. Loose laid on to the completed waterproofing, butt jointed with 100 mm fleece overlap, to provide drainage, protection and a filtration layer for the BauderGREEN XF301 lightweight sedum system. Cut to fit closely around penetrations and outlets.
|
Planting systems | |
Planting requirements | Bauder XF301 Sedum System with Bauder Xero Flor Organic Fertiliser.Guidance for specification option: BauderGREEN XF301 lightweight sedum system with BauderGREEN DU UK organic slow release fertiliser. The product can be laid directly onto the waterproofing without the need for a growing medium. XF301 also contains a moisture mat which retains up to 5 L/m2 of water. The vegetation is a mix of in excess of 14 sedum varieties.
Lay within 36 hours of lifting from growing position. Blankets should be laid diagonally or perpendicular to the slope of the roof. Stagger joints, butt together or slightly overlap to prevent gaps. Blankets are not to be stretched. Thoroughly water using surface sprinklers immediately after installation and substrate dressing, ensuring that the blankets and substrate are fully saturated before moving on to the next area. General: Do not lay if blankets are dried out, damaged, frosty or waterlogged. Sloped Roofs: Blankets to be laid over the spikes of the already installed Bauder retention strips and trod down to ensure that the spikes penetrate the moisture retention fleece to the underside of the blanket. Bauder Retention Strips Required:
Bauder XF301 Sedum Blanket on Exposed Sites: It may be necessary to provide a stone ballast coating spread evenly to prevent wind uplift and erosion of the vegetation blanket in high winds and/ or heavy rainfall. Installation: 20–40 mm rounded washed pebbles to be installed onto the vegetation blankets to provide the required loading of 27 kg/m². Vegetation Blankets could be secured at intervals by using wire or cable ties, as required. Follow Bauder Establishment Watering Guidelines also. Establishment Watering Requirements: XF301 requires surface watering for the first 4 weeks following installation (to ensure that the sedum blanket remains moist to the touch). It is the responsibility of the roofing contractor to liaise with the main contractor/ building owner to provide water to ensure that the vegetation mat does not dry out during this period. An adequate mains supply of sufficient pressure must be available and operational prior to the sedum blanket being delivered and installed. Irrigation systems (where fitted on roof slopes above 10°) must be operational, but initial watering in of the fertilizer must be by surface mounted sprinklers. See the Bauder Watering Guide document for detailed information on watering requirements. Bauder Ltd accepts no responsibilities whatsoever for the condition of installed sedum blankets that are not properly watered in accordance with our recommendations. Manufacturer guidanceBauder Sedum Blankets are grown in a shallow growing medium which contains very little nutrient, so the annual application of fertilizer is crucial to ensure that the plants remain healthy. Fertilizer should ideally be applied during March/ April, as it helps the plants to prepare for extreme weather conditions and flowering whilst also allowing the different species to gain sufficient nutrients without competing against each other. BauderGREEN XF301 lightweight sedum system with BauderGREEN DU UK organic slow release fertiliser can be obtained direct from Bauder in 25 kg bags, which is sufficient for an area of 312.5 m2 when applied at the recommended rate of 80 g/m². Areas of up to 30 m² may be applied using either a handheld spreader or strewn by hand from a bucket. Larger roofs should always be done using a trolley applicator, which can be purchased direct from Bauder. Always apply the fertilizer at the given rate written on the bag. It is recommended that the fertilizer is lightly ‘watered in’ immediately after application, to avoid “burning” of the foliage, which may occur if fertilizer pellets settle on the leaves. Dung-based organic fertilizers should be avoided. |
Waterproofing (not Inverted Roof Systems) | Bauder Total Green Roof System Roof Covering System. Bauderflex Green Roof System. Bauder Single Ply Thermofol PVC Roof system. Bauder Single Ply Thermoplan T Flexible Polyolefin Roof system. Bauder LiquiTEC Cold Liquid Applied Roof System. Manufacturer guidanceTo be fully specified separately. |
Maximum Slope | 25°. |
Accessories | Not required. BauderGREEN AL 40 edge trim. Guidance for specification option: Perforated edge/ drainage trim used to frame and contain the green roof build-up. AL40 is specifically designed to be used with the Bauder XF301 Sedum System. Normally installed directly onto waterproofing, the drainage trims can be welded down using lengths of the waterproofing membrane. The trim is used to frame the green roof build up and should be completed and inspected prior to living material being delivered to site. See Bauder Green Roof Installation Guide for full details.
BauderGREEN KS ALU 250 inspection chamber. Guidance for specification option: The BauderGREEN KS ALU 250 inspection chamber is fabricated from a perforated aluminium sheet with an opening/ lockable lid and is used for intensive and extensive soft landscaping, as well as ballasted inverted roofs. Install centrally over rainwater outlets. A simple on-site modification allows the unit to be used over outlets that are located close to wall or kerb abutments. The Inspection Chamber is suitable for landscaping depths of less than 100 mm. Where landscaping is deeper than 100 mm, the 50 mm or 100 mm height adaptors can be added as necessary to achieve the required height to be level with or slightly proud of the surrounding landscaping. Surround: using 20/ 40 mm grade washed pebbles, the inspection chamber must be surrounded by a 500 mm vegetation barrier to prevent unwanted growth from obstructing the drainage system. BauderGREEN KS ALU 250 inspection chamber:
BauderGREEN KS AE 50 chamber height adaptor. Guidance for specification option:
BauderGREEN KS AE 100 chamber height adaptor. Guidance for specification option:
|
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
Platform | Compatible | Version |
---|---|---|
- | 1 | |
- | 1 |