NBS Source
I'm a manufacturer

BauderSOLAR F XL

Verified by manufacturer 5 months ago

Bauder Ltd

A flat roof PV mounting solution for framed solar modules.

Jump to:
BOS
+44 (0)1473 257671 Website

Application

BauderSOLAR F XL is specifically designed to be installed on specific Bauder bituminous or single-ply waterproofing systems for framed solar modules manufactured by Bauder module partners.


BauderSOLAR F XL can be installed on slopes of up to 5° for bituminous membranes and 10° for single-ply membranes.


BauderSOLAR F XL is intended to be used in combination with the following membranes:

  • Bauder Total Roof System.
  • Bauderflex.
  • Bauder Thermofol – minimum 1.8 mm mechanically fixed or adhered, all colours.
  • Bauder Thermofol Fleece Back – minimum 1.5 mm mechanically fixed or adhered, all colours.
  • Bauder Thermoplan – minimum 1.5 mm mechanically fixed, all colours.

Description

BauderSOLAR F is a flat roof PV mounting solution for framed solar modules. The mounting units are secured to the roof using a membrane-to-membrane welding technique. This installation method means that the roof is not compromised by penetrations for fixings, nor does it require ballast, which would add additional weight loading to the roof. Provides a lightweight, low risk and quick to install mounting solution.


The number of mounts and fixings required will vary from project to project. Please contact Bauder for a project specific technical report for further information. Windload and snowload calculations will also be provided on a project specific basis.


Only to be used as part of a full Bauder Waterproofing System.

General information

Color

Black

Material

Polyamide

Polypropylene

Warranty description

-

Manufacturer guidance

A comprehensive range of guarantee options are available. Please contact your local Bauder Area Technical Manager for more information.

Uniclass

Pr_80_77_27_72 Roof anchors for solar modulesPrimary

Specification data - Roof anchors for solar modules

Material

Polypropylene (PP) and polyamide.

Anchor type

Suitable for use on Bauder bituminous or single ply waterproofing systems.

Components

Main substructure, Welding Sleeve, Baseplate, Bayonet Cap, Bayonet Safety Pin, Module Locking Pin.

Main substructure, Welding Sleeve, Baseplate, Bayonet Cap, Bayonet Safety Pin, Module Locking Pin, Separation layer.

Guidance for specification option:

Separation layer for PVC roof membranes only 6 mm thick, pre-cut to sit over the Bauderwelding sleeve. (Recycled rubber granulate with an aluminium foil backing).

Sustainability data

Country of product manufacture

Germany

Embodied carbon

A1-A3 (production stage) as defined in BS EN 15804

-

Manufacturer guidance

Please refer to EPD on the Bauder website.

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit
-

1

IFC
-

1

Literature

Solar PV Systems - Bauder brochure

Solar PV Systems - Bauder brochure

BauderSOLAR F XL - Technical Data Sheet

BauderSOLAR F XL - Technical Data Sheet