NBS Source
I'm a manufacturer

Beneath Heat Slim Fix Over Floor UFH System - Underfloor Heating System

Verified by manufacturer 3 months ago

Beneath Heat

Underfloor heating (UFH) system for use over the floor, pipes held in place by low-profile castellated panels covered with a minimum of 15 mm self-levelling compound.

Jump to:
07944706296 Website

Application

Underfloor heating (UFH) system for use over the floor, in new builds and renovation.

Description

Underfloor heating (UFH) system for use over the floor, pipes held in place by low-profile castellated panels covered with a self-levelling compound.


Features and benefits:

  • Self-adhesive backing, designed to avoid using fixings and staples in the floor, can be stuck over any subfloor, solid floor or timber floor.
  • Subfloor must be structural, flat and clear of debris, and insulated.
  • Minimum 15 mm self-levelling compound is to be laid in preparation for floor covering.
  • Castellations in the panel grip the pipe, provide a constant guide for pipe spacing, and provide protection from site traffic.
  • Standard pipe holders allow for standard compliant installation and uniform temperature distribution, whilst allowing for simple repositioning.
  • For use with 10 mm-diameter PERT pipes at 150 mm centres (therefore suitable for use with heat pumps and boilers).
  • Heating performance*: 71 W/m².


*Heat output at a flow water temperature of 45°, based on a tog rating of 1 with a room temperature of 21°. Consult manufacturer's literature for full details.

General information

Color

Black

Finish

Grooved

Material

Plastic

Shape

Rectangle

Length

1220 mm

Width

820 mm

Height

12 mm

Warranty description

Two year

Guidance for specification option:

Electrical and mechanical products.

50 year

Guidance for specification option:

Pipes.

Manufacturer guidance

Consult manufacturer for full details.

Uniclass

Ss_60_40_92_94 Underfloor low-temperature hot water heating systemsPrimary

CAWS

T90/475 Underfloor heating systems

T90/475 Underfloor heating systems

Specification data - Underfloor low-temperature hot water heating systems

System performance

Guidance for specification option:

Insert requirements.

Heat source

Low-temperature hot water heating system.

Guidance for specification option:

Specify details separately.

Pumps

Beneath Heat underfloor heating pump pack.

Beneath Heat single area pump pack.

Manufacturer guidance

Consult manufacturer for details.

Pipework

-

Distribution

Guidance for specification option:

Insert requirements.

Underfloor

10 mm PERT pipes and fittings.

Manufacturer guidance

Installation tools available, including pipe decoilers, pipe cutters and pipe calibrators.

Jointing materials

Guidance for specification option:

Insert requirements.

Pipe supports

Castellated panels plus minimum 15 mm self-levelling compound; pipes at 150 mm centres.

Valves

Guidance for specification option:

Consult manufacturer for options and insert requirements.

Options include manifolds, blend valves, heat pump valves and return elbows.

Water treatment

Guidance for specification option:

Consult manufacturer for options and insert requirements or omit.

Accessories

230 V Saswell dial thermostat.

Guidance for specification option:

Consult manufacturer for options and insert requirements.

230 V Saswell programable thermostat.

230 V Saswell WiFi thermostat.

Wireless Saswell programable thermostat.

Wireless Saswell WiFi thermostat.

Saswell WiFi gateway

Controls

-

Controllers

Saswell 230 V two wire actuator.

230 V wiring centre.

230 V wireless wiring centre.

Control valves

Saswell two-port motorised valve.

Sensors

Not required.

Saswell floor/ air sensor.

Single area pump pack adaptors.

Guidance for specification option:

Not for use with single area pump pack.

Floor covering

Tiled.

Guidance for specification option:

Can be applied directly over the slim board. Specify separately if required.

Interlocking wood flooring.

Guidance for specification option:

Can be applied directly over the slim board. Specify separately if required.

Other

Guidance for specification option:

Minimum 3 mm self-levelling compound required before final covering is applied.

Specify separately if required.

Sustainability data

Contains Red List materials

No

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Material

Plastic

Recyclability

Fully recyclable as standard without self adhesive backing

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

99.5 %

Literature

Beneath Heat Slim Fix Over Floor UFH System

Beneath Heat Slim Fix Over Floor UFH System

Underfloor Heating Product and Technical Guide

Underfloor Heating Product and Technical Guide