Beneath Heat Slim Fix Over Floor UFH System - Underfloor Heating System
Verified by manufacturer 2 months ago
Underfloor heating (UFH) system for use over the floor, pipes held in place by low-profile castellated panels covered with a minimum of 15 mm self-levelling compound.
Application
Underfloor heating (UFH) system for use over the floor, in new builds and renovation.
Description
Underfloor heating (UFH) system for use over the floor, pipes held in place by low-profile castellated panels covered with a self-levelling compound.
Features and benefits:
- Self-adhesive backing, designed to avoid using fixings and staples in the floor, can be stuck over any subfloor, solid floor or timber floor.
- Subfloor must be structural, flat and clear of debris, and insulated.
- Minimum 15 mm self-levelling compound is to be laid in preparation for floor covering.
- Castellations in the panel grip the pipe, provide a constant guide for pipe spacing, and provide protection from site traffic.
- Standard pipe holders allow for standard compliant installation and uniform temperature distribution, whilst allowing for simple repositioning.
- For use with 10 mm-diameter PERT pipes at 150 mm centres (therefore suitable for use with heat pumps and boilers).
- Heating performance*: 71 W/m².
*Heat output at a flow water temperature of 45°, based on a tog rating of 1 with a room temperature of 21°. Consult manufacturer's literature for full details.
General information
Color | Black |
Finish | Grooved |
Material | Plastic |
Shape | Rectangle |
Length | 1220 mm |
Width | 820 mm |
Height | 12 mm |
Warranty description | Two year Guidance for specification option: Electrical and mechanical products. 50 year Guidance for specification option: Pipes. Manufacturer guidanceConsult manufacturer for full details. |
Material | Plastic |
Uniclass | |
CAWS | T90/475 Underfloor heating systems T90/475 Underfloor heating systems |
Specification data - Underfloor low-temperature hot water heating systems
System performance | Guidance for specification option: Insert requirements. |
Heat source | Low-temperature hot water heating system.Guidance for specification option: Specify details separately. |
Pumps | Beneath Heat underfloor heating pump pack.Beneath Heat single area pump pack.Manufacturer guidanceConsult manufacturer for details. |
Pipework | |
Distribution | Guidance for specification option: Insert requirements. |
Underfloor | 10 mm PERT pipes and fittings.Manufacturer guidanceInstallation tools available, including pipe decoilers, pipe cutters and pipe calibrators. |
Jointing materials | Guidance for specification option: Insert requirements. |
Pipe supports | Castellated panels plus minimum 15 mm self-levelling compound; pipes at 150 mm centres. |
Valves | Guidance for specification option: Consult manufacturer for options and insert requirements. Options include manifolds, blend valves, heat pump valves and return elbows. |
Water treatment | Guidance for specification option: Consult manufacturer for options and insert requirements or omit. |
Accessories | 230 V Saswell dial thermostat.Guidance for specification option: Consult manufacturer for options and insert requirements. 230 V Saswell programable thermostat.230 V Saswell WiFi thermostat.Wireless Saswell programable thermostat.Wireless Saswell WiFi thermostat.Saswell WiFi gateway |
Controls | |
Controllers | Saswell 230 V two wire actuator.230 V wiring centre.230 V wireless wiring centre. |
Control valves | Saswell two-port motorised valve. |
Sensors | Not required.Saswell floor/ air sensor.Single area pump pack adaptors.Guidance for specification option: Not for use with single area pump pack. |
Floor covering | Tiled. Guidance for specification option: Can be applied directly over the slim board. Specify separately if required. Interlocking wood flooring. Guidance for specification option: Can be applied directly over the slim board. Specify separately if required. Other Guidance for specification option: Minimum 3 mm self-levelling compound required before final covering is applied. Specify separately if required. |
Sustainability data
Contains Red List materials | No |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Material | Plastic |
Recyclability | Fully recyclable as standard without self adhesive backing |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 99.5 % |
Literature
Beneath Heat Slim Fix Over Floor UFH System
Underfloor Heating Product and Technical Guide
Similar products from Beneath Heat
Beneath Heat 15 mm Slim Board Over Floor UFH System - Underfloor Heating System
Beneath Heat 20 mm Slim Board Over Floor UFH System - Underfloor Heating System
Beneath Heat 22 mm T&G Foiled Chipboard Over Joists UFH System - Underfloor Heating System
Beneath Heat Clip & Rail Screeded Floor UFH System - Traditional Underfloor Heating System
Beneath Heat Dry Screed Mix Between Joists UFH System - Underfloor Heating System
Beneath Heat Spreader Plate Between Joists UFH System - Underfloor Heating System
Beneath Heat Staple Screeded Floor UFH System - Traditional Underfloor Heating System
Beneath Heat Tacker Panel Screeded Floor UFH System - Underfloor Heating System