CALPEX PUR-KING - Heating Low-Temperature Pipe System
Verified by manufacturer 2 months ago
CALPEX PUR-KING UNO
CALPEX PUR-KING UNO
KIWA BDA
Certificate type
The patented CALPEX PUR-KING with a PEX carrier pipe is a flexible, continuous and self-compensating low-temperature pipe system with a lambda value of 0.0199 W/m·K.
Application
Local and district heating networks.
Description
The patented CALPEX PUR-KING with a PEX carrier pipe is a flexible, continuous and self-compensating low-temperature pipe system with a lambda value of 0.0199 W/m·K (at an average measured temperature of 50°C).
Features and benefits:
- Operating temperature: maximum 95°C (fluctuating).
- Operating pressure: PN 6.
- Dimensions: UNO DN 20–150; DUO: 2 x DN 20–65.
- Carrier pipe: PEX-a; boasts excellent thermal and mechanical properties.
- Insulation: polyurethane (PUR) foam.
- Outer jacket: linear low-density polyethylene (LLD-PE).
General information
Color | Grey |
Material | High density polyethylene (HDPE) Linear low-density polyethylene (LLDPE) Polyurethane (PUR) Cross-linked polyethylene (PE-X) |
Shape | Circle |
Length | Bespoke |
Width | 78 mm 93 mm 113 mm 128 mm 143 mm Manufacturer guidanceSleeve pipe diameter. |
Height | 78 mm 93 mm 113 mm 128 mm 143 mm Manufacturer guidanceSleeve pipe diameter. |
Warranty description | Two year |
Uniclass | |
CAWS | T90/110 Heating system T90/410 Thermoplastics pipelines |
Specification data - Pre-insulated pipes
Classification data | |
Standards | |
Pipes | Carrier pipe to DIN 16892/ 16893 and EN 12318-2. |
Environmental performance | |
Environmental rating | Manufacturer's standard. |
Embodied carbon | Manufacturer's standard. |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | Manufacturer's standard. |
Recyclability | Manufacturer's standard. |
Accessories | House entry bend 90°, 1.6 x 1.1 m. Forked pipe with PE-Xa carrier pipe. Forked pipe with steel carrier pipe. PEX screw connection with male thread. Guidance for specification option: Connection, coupling, T-piece. PEX screw connection with weld-on end. Guidance for specification option: Connection, coupling, T-piece. PEX press connection with sliding sleeve with male thread. Guidance for specification option: Connection, coupling, T-piece. PEX press connection with sliding sleeve with weld-on end. Guidance for specification option: Connection, coupling, T-piece. Socket connection (SMPE connecting socket). Shrink-end cap. Sealing ring. GFK half shells. Guidance for specification option: For the isolation of T-pieces. Distribution duct. |
Pipe diameter | DN 20 (CPX H 25/76). Guidance for specification option: PEX inner pipe: 25 x 2.3 mm. Minimum bending radius: 0.45 m. DN 20 (CPX H 25/91 PLUS). Guidance for specification option: PEX inner pipe: 25 x 2.3 mm. Minimum bending radius: 0.65 m. DN 25 (CPX H 32/76). Guidance for specification option: PEX inner pipe: 32 x 2.9 mm. Minimum bending radius: 0.50 m. DN 25 (CPX H 32/91 PLUS). Guidance for specification option: PEX inner pipe: 32 x 2.9 mm. Minimum bending radius: 0.50 m. DN 32 (CPX H 40/91). Guidance for specification option: PEX inner pipe: 40 x 3.7 mm. Minimum bending radius: 0.55 m. DN 32 (CPX H 40/111 PLUS). Guidance for specification option: PEX inner pipe: 40 x 3.7 mm. Minimum bending radius: 0.75 m. DN 40 (CPX H 50/111). Guidance for specification option: PEX inner pipe: 50 x 4.6 mm. Minimum bending radius: 0.60 m. DN 40 (CPX H 50/126 PLUS). Guidance for specification option: PEX inner pipe: 50 x 4.6 mm. Minimum bending radius: 1.20 m. DN 50 (CPX H 63/126). Guidance for specification option: PEX inner pipe: 63 x 5.8 mm. Minimum bending radius: 0.65 m. DN 50 (CPX H 63/142 PLUS). Guidance for specification option: PEX inner pipe: 63 x 5.8 mm. Minimum bending radius: 0.85 m. DN 65 (CPX H 75/142). Guidance for specification option: PEX inner pipe: 75 x 6.8 mm. Minimum bending radius: 0.70 m. DN 65 (CPX H 75/162 PLUS). Guidance for specification option: PEX inner pipe: 75 x 6.8 mm. Minimum bending radius: 0.90 m. DN 80 (CPX H 90/162). Guidance for specification option: PEX inner pipe: 90 x 8.2 mm. Minimum bending radius: 1.00 m. DN 80 (CPX H 90/182 PLUS). Guidance for specification option: PEX inner pipe: 90 x 8.2 mm. Minimum bending radius: 1.00 m. DN 100 (CPX H 110/162). Guidance for specification option: PEX inner pipe: 110 x 10.0 mm. Minimum bending radius: 1.10 m. DN 100 (CPX H 110/182). Guidance for specification option: PEX inner pipe: 110 x 10.0 mm. Minimum bending radius: 1.20 m. DN 100 (CPX H 110/202 PLUS). Guidance for specification option: Available on request, consult manufacturer for details. PEX inner pipe: 110 x 10.0 mm. Minimum bending radius: 1.40 m. DN 125 (CPX H 125/182). Guidance for specification option: PEX inner pipe: 125 x 11.4 mm. Minimum bending radius: 1.30 m. DN 125 (CPX H 125/202 PLUS). Guidance for specification option: Available on request, consult manufacturer for details. PEX inner pipe: 125 x 11.4 mm. Minimum bending radius: 1.50 m. DN 125 (CPX H 140/202). Guidance for specification option: PEX inner pipe: 140 x 12.7 mm. Minimum bending radius: 1.40 m. DN 150 (CPX H 160/250). Guidance for specification option: PEX inner pipe: 160 x 14.6 mm. |
Format | Section length. Coil. Drum. |
Pipe material | Carrier: PEX-a. Insulation: polyurethane (PUR). |
Operating pressure (maximum) | PN 6. |
Sustainability data
Country of material origin | Netherlands |
Country of product manufacture | Switzerland |
Material | High density polyethylene (HDPE) Linear low-density polyethylene (LLDPE) Polyurethane (PUR) Cross-linked polyethylene (PE-X) |
BIM objects
| Platform | Compatible | Version |
|---|---|---|
 Revit | - | 1 |
Product certifications
KIWA BDA
Kiwa Regulation 4 (KUKreg4) Certification
Literature
Literature type
BRUGG CALPEX Catalogue
BRUGG CALPEX Brochure
CALPEX Installation Instructions