NBS Source
I'm a manufacturer

CARRICO® Car Lift

Verified by manufacturer 7 months ago

Lödige Industries

Cost-efficient vehicle transport between floors.

Jump to:
01784 221140 Website

Application

Car lift; applications include single-family detached homes, multi-family buildings, office buildings and hotels. Suited to less frequent traffic; particularly suitable for up to 26 parking places.

Description

Cost-efficient vehicle transport between floors.


Features and benefits:

  • Saves installation space, as no ramp is required.
  • Especially suitable for narrow shafts.
  • Cost-effective way to transport cars.
  • For less frequent traffic.
  • Particularly suitable for up to 26 parking places.
  • Fully automatic travel for lifts with two stops for maximum comfort; automatic travel from three to eight stops.
  • Car with passenger escort allowed.
  • Low noise.
  • Smartphone app control option.
  • Lifting height up to 25 m.


Technical data:

  • Lifting height up to 25 m.
  • Nominal speed: 0.15 m/s
  • Pit depth: 850 mm (standard) - reduction possible
  • Nominal load: 3,500 - 4,200 kg
  • Cabin width: 2,500 - 3,000 mm
  • Cabin depth: 5,500 - 7,000 mm
  • Cabin height: 2,100 - 3,000 mm
  • Shaft width: cabin width + 800 mm
  • Shaft depth: cabin dpeth + 800 mm
  • Stops: 2 - 8
  • Accesses: 2- 16
  • Directives: Machine Directive 2006/42/EC and DIN EN 81-41 (on the basis)

General information

Color

Other

Guidance for specification option:

Contact manufacturer for any colour.

Finish

Galvanized

Material

Steel

Shape

Rectangle

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

One year

Uniclass

Pr_65_80_47_95 Vertical lifting platformsPrimary

CAWS

X12/110 Vertical lifting platform systems

X12/110 Vertical lifting platform systems

Specification data - Vertical lifting platforms

Standard

Machine Directive 2006/42/EC and DIN EN 81-41 (on the basis)

Guidance for specification option:

To Machinery Directive 2006/42/EC.

Rated load (minimum)

3500 kg.

Guidance for specification option:

Maximum 4200 kg.

Manufacturer guidance

Axle load: Maximum 1750 kg, forklift operation prohibited.

Drive type

Hydraulic power unit with pump-motor suboil unit.

Guidance for specification option:

See Motor Position below for machine room/ cabinet options.

Carriage type

Fully enclosed.

Carrier

-

Frame material

Manufacturer's standard.

Frame finish

Manufacturer's standard.

Frame colour

Manufacturer's standard.

Infill material

Sheet steel.

Infill finish

Sendzimir-galvanized steel.

Painted.

Stainless steel.

Insert colour

Silver.

Guidance for specification option:

Standard for Sendzimir-galvanized and stainless steel finishes.

Colour.

Guidance for specification option:

Painted finish only; insert requirements.

Doors

-

Arrangement

Front opening (single entrance).

Through-loading/ front-and-rear opening (two entrances).

Type

Six-part, centrally opening telescopic sliding doors.

Guidance for specification option:

Standard.

Automatic louvre doors, centrally opening.

Two cabin/ two landing doors.

Guidance for specification option:

Slat-surface aluminum, powder-coated RAL 9006.

Manufacturer guidance

Door height is 2100 mm as standard; for options, consult manufacturer.

Clear opening width (minimum)

-

Manufacturer guidance

Insert requirements, maximum door width: 2400–3000 mm.


Maximum cabin width varies dependent on maximum door width and lifting height required; consult manufacturer's literature for details.

Fire classification

Manufacturer's standard.

EW30.

Guidance for specification option:

Only available with standard telescopic doors.

EW60.

Guidance for specification option:

Only available with standard telescopic doors.

Frame material

Low-carbon steel.

Frame finish

Painted.

Infill finish

Manufacturer's standard.

Painted.

Powder-coated.

Infill colour

Manufacturer's standard.

Guidance for specification option:

Manufacturer's standard finish only.

RAL.

Guidance for specification option:

Insert requirements from the Classic RAL colour table.

Available for painted or powder-coated finishes only.

Carrier floor

-

Dimensions

-

Width (minimum)

-

Manufacturer guidance

Consult manufacturer's literature and insert requirements.


2500–3000 mm ;maximum cabin width allowable varies dependent on maximum door width and lifting height required.

Depth (minimum)

-

Manufacturer guidance

5500–7000 mm.; consult manufacturer's literature and insert requirements.

Cabin depth is defined as the distance between the entrance panels.


Useable depth depends on door arrangement:

  • Through-loading/ front-to-back: Cabin depth minus 100 mm.
  • Front-opening: Cabin depth minus 130 mm.

Material

Extruded aluminium profiles.

Guidance for specification option:

 Particularly suitable for difficult construction site situations with regard to space conditions, as this variant is only installed in the lift shaft on site.

Smooth sheet metal, primed.

Guidance for specification option:

RAL 7032.

Smooth sheet metal, primed, platform division.

Guidance for specification option:

RAL 7032.

Aluminium bulb plate.

Aluminium bulb plate, platform division.

V2A stainless steel chequer plate.

V2A stainless steel chequer plate, platform division.

Two-component anti-slip coating.

Guidance for specification option:

Epoxy resin-based, solvent-free and non-slip coating, is sprinkled with quartz sand with a grain size of  0.3–0.8 mm.

Two-component anti-slip coating, platform division.

Manufacturer guidance

On request, a platform division can be made in longitudinal direction. This is particularly recommended in difficult construction site situations, with regard to space conditions, in order to ensure the insertion of the platform into the lift shaft.

Not available/required for extruded aluminum profiles.

Colour

As Material.

Electrical supply

Manufacturer's standard.

Control device type

Manufacturer's standard.

Guidance for specification option:

  1. Handheld transmitter (radio remote control);
  2. Pull switch:
  • With console for ceiling mounting.
  • 2 m-long pull cord. Consult manufacturer for full details.

Manufacturer guidance

Operation via smartphone app is available; consult manufacturer for details.

Accessories

None.

Deflector rails, hardwood.

Guidance for specification option:

Insert requirements.

Can be arranged on the car side walls in a single row or two-row arrangement. This prevents damage to the lift cabin and vehicle. 

Deflector rails, plastic.

Guidance for specification option:

Insert requirements.

Can be arranged on the car side walls in a single row or two-row arrangement. This prevents damage to the lift cabin and vehicle. 

Threshold heating tape.

Guidance for specification option:

Self-limiting heating tape for landing door thresholds located outdoors for safe operation of the lift system in frosty conditions.

Silence package I.

Guidance for specification option:

For the reduction of structure-borne noise on the hydraulic drive system. Consult manufacturer for details.

Silence package II.

Guidance for specification option:

For the reduction of structure-borne noise on the hydraulic drive system. Consult manufacturer for details.

Silence package III.

Guidance for specification option:

Whisper rollers for telescopic sliding door. Consult manufacturer for details.

Key safe.

Guidance for specification option:

Complete key safe with three keys, security card: Series 600 

834 EFEFBF and wall anchor.

Outer dimensions: 145 x 46 mm; internal dimensions: 78 x 36 mm.

To be installed on site independent of the lift.

Manufacturer guidance

Additional features not listed, e.g. oil coolers or tank heaters, are dependent on performance requirements and can be discussed with the manufacturer.

Entry configuration

One side or through car loading

Manufacturer guidance

Insert requirements, 2–8 stops.

Include details of accesses per floor for through-loading/ front-and-rear opening.

Cabin

Guidance for specification option:

Height: 2100–3000 mm; insert requirements.

Manufacturer guidance

Components:

  1. Signal lights (IP65)
  2. Operating panel including positioning indicator.
  3. Call button panel.
  4. LED ceiling light panel.
  5. Lift doors (detailed elsewhere).
  6. Light barriers for car detection.
  7. Light grid in entry area.
  8. Radar entrance monitoring system.
  9. Cabin floor (detailed elsewhere).
  10. Cabin ceiling/cabin walls.


For full details, consult manufacturer.

For deflector strips, see Accessories.

Lift height

up to 25,000 mm

Manufacturer guidance

Up to 25 000 mm; insert requirements. For cabin heights of 2100 mm and superimposed accesses, the minimum floor distance is 2670 mm.


Note that allowable cabin, shaft and door widths vary with overall lifting height. Consult manufacturer's literature for details.


Lifting height is the distance between the finished floor level (FFL) of the highest and lowest levels. Pit depth and headroom at the highest level are additional height factors.

Headroom

Manufacturer's standard.

Guidance for specification option:

Consult manufacturer's literature for details.

Bespoke.

Guidance for specification option:

Consult manufacturer's literature for options and insert requirements.

Manufacturer guidance

Note that the headroom depends on a number of factors, including the planned pit, and can increase in size if a silence package is used (see accessories).

Shaft

Manufacturer's standard.

Guidance for specification option:

Width/ depth = cabin width/ depth + 800 mm.

Head height minimum 2700 mm (dependent on headroom requirements.

Bespoke.

Guidance for specification option:

Insert requirements.

  • Note that minimum shaft width varies with overall lifting height.
  • Minimum shaft depth is dependent on required cabin depth.

Consult manufacturer's literature for details.

MotorPosition

Machine room (option 1).

Guidance for specification option:

Minimum width: 2000 mm.

Minimum depth: 2000 mm.

Machine room (option 2).

Guidance for specification option:

Minimum width: 1400 mm.

Minimum depth: 3000 mm.

Machine room (option 3).

Guidance for specification option:

Minimum width: 450 mm.

Minimum depth: 2560 mm.

Machine control cabinet (option 4).

Guidance for specification option:

Minimum width: 700 mm.

Minimum depth: 1400 mm.


A space-saving version of the machine room. The drive unit and control unit are housed in the cabinet, removing the need for a separate machine room (saves approx. 4 –5 m²).

Machine control cabinet (option 5).

Guidance for specification option:

Minimum width: 700 mm.

Minimum depth: 1400 mm.


A space-saving version of the machine room, recessed into the shaft wall to avoid a protruding contour outside the shaft.

Manufacturer guidance

For all options, insert location requirements.

  • All configurations other than option 5 require the machinery to be located alongside the lift shaft, along the length. Consult manufacturer for full details.


Minimum height: 2100 mm.

Pit opening

Depth: 850 mm.

Guidance for specification option:

As standard. Depth reduction possible; consult manufacturer.

Speed

0.15 m/s.

Insulation

Not required.

Option 1: non-continuous insulation in door area.

Option 2: Continuous insulation.

Manufacturer guidance

The following areas can be insulated:

  • Shaft side walls;
  • Front-facing shaft walls (except for in the area of the door);
  • Shaft ceiling (headroom must always be extended by the thickness of the insulation.


Consult manufacturer for full details including allowable insulation thicknesses.

Sustainability data

Contains Red List materials

No

Country of material origin

Germany

Country of product manufacture

Germany

Literature

Car Park Solutions

Car Park Solutions

Call Carlift Via App

Call Carlift Via App

Lifting Solutions Brochure

Lifting Solutions Brochure

TRAFFICO and CARRICO Planning Guide

TRAFFICO and CARRICO Planning Guide

Focus on Architecture

Focus on Architecture

© 2024 NBS Enterprises Ltd. All rights reserved.