Verified by manufacturer 3 months ago
Double wire rebound panel system.
CLD Dulok Sport Rebound offers built in rebound ability without the need for separate panels or a compromise on security. With both full or partial options, Dulok Sport Rebound can be paired with the Dulok double wire system to create an aesthetically pleasing low maintenance sports perimeter.
Features and benefits:
Color | Green Other Guidance for specification option: Any RAL colour available. |
Finish | Galvanized Powder-coated |
Material | Steel |
Shape | Rectangle |
Width | 2506 mm |
Height | Bespoke Guidance for specification option: 1230-2030 mm as full rebound panels. 3030-6060 mm as combination of rebound and Dulok standard panels heights. |
Warranty description | 15 year Guidance for specification option: Minimum of 15 years against manufacturing defects. |
Uniclass | |
CAWS | Q40/27 Open mesh steel panel general purpose fencing Q40/30 Proprietary fencing Q40/430 Proprietary fencing |
Product range |
System performance | Sports fencing performance. |
Posts | Carbon steel posts.Guidance for specification option: RHS. Manufacturer guidanceGalvanized after manufacture and polyester powder-coated to match fencing. |
Post foundations | Set posts in holes minimum 300 mm diameter x 800 mm deep. |
End walls | |
Materials | Steel. |
Side panels | |
Materials | Steel. |
Height | Manufacturer guidance
|
Colour and finish | Green. Guidance for specification option: As standard. RAL colour. Guidance for specification option: Consult manufacturer and insert requirement. |
Width | 2506 mm. |
Mesh size | 66.5 x 50 mm. |
WireDiameter | 6 mm verticals and twin 8 mm horizontals. |
Site applied finishes | Polyester powder-coated to 60-80 µ. Polyester powder-coated to 160-200 µ. Manufacturer guidanceWith marine grade and metallics. |
Size | 60 x 40 mm. Guidance for specification option: Minimum depending on panel height. |
Projection | 30 mm on one side. Manufacturer guidanceTop edge projection. |
Installation | Bottom of panel approximately 40 mm above ground. |
Panel Type | Mesh and wire, single vertical and double horizontal wires. |
Post centres | 2520 mm. |
Fixings | 40 x 5 mm full length clamp bar. M8 x 40 mm stainless steel pin hex dome-head security screws. Guidance for specification option: Sheardrive™ if required instead of pin hex. Rubber grommets available for noise reduction. |
Contains Red List materials | No |
Country of product manufacture | United Kingdom |
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
Platform | Compatible | Version |
---|---|---|
- | 1 | |
- | 1 |