NBS Source
I'm a manufacturer

Cold Set Coating

Verified by manufacturer 4 months ago

Watco UK Ltd

A high performance formulation that can be applied in cold conditions.

Jump to:
+44 (0)1483 418418 Website

Application

Areas of use:

  • Production areas;
  • Warehouses;
  • Workshops;
  • Loading bays;
  • Cold stores, walk-in fridges and freezers;
  • Interior and exterior.

Description

A high performance formulation for cold conditions where conventional coatings will fail to dry; and heavily trafficked, unheated areas, such as workshops, warehouses, loading bays and cold stores. Cold Set Coating is resistant to UV and weathering, making it a versatile interior and exterior coating. The product has impressive test results for abrasion, scratch and impact resistance, as well as for adhesion and hardness.


Features and benefits:

  • High performance, two part, polyaspartic resin formulation.
  • Can be applied at temperatures as low as minus 10°C and as high as 25°C.
  • Excellent resistance to UV and weathering.
  • Fast curing – ready for heavy traffic in just 16 hours.
  • Superior abrasion and scratch resistance.
  • Extremely strong – easily copes with forklift trucks.
  • Superior performance demonstrated by ISO testing to CE Mark EN 1504-2.

General information

Color

Grey

Guidance for specification option:

Available in light and mid brown.

Red

Guidance for specification option:

Tile red.

Blue

Guidance for specification option:

Mid blue.

Green

Guidance for specification option:

Mid green.

Yellow

Guidance for specification option:

Safety yellow.

Finish

Gloss

Material

Resin

Guidance for specification option:

Two pack, high solids, polyaspartic resin.

Uniclass

Pr_35_31_22_18 Concrete floor paintsPrimary
Pr_35_31_68_70 Resin floor coatings
Pr_35_31_22_15 Concrete finishing coats

CAWS

M60/180 Floor coating

Product range

Paints and Coatings / Special Use Paints

Specification data - Concrete floor paints

Colour

Light grey.

Mid grey.

Tile red.

Mid blue.

Mid green.

Safety yellow.

Execution

Applying flooring.

Product Reference

Cold Set Coating

Dry film thickness

85 microns.

Wet film thickness (minimum)

100 microns.

Coverage

25 m².

Guidance for specification option:

Per coat onto a non-porous surface. If applying in temperatures below 0°C, or onto a textured or porous surface, coverage may be reduced.

Abrasion resistance

187 mg.

Guidance for specification option:

To ISO 5470-1.

Impact resistance

Class 3.

Guidance for specification option:

To ISO 6272.

Scratch resistance

16 N.

Guidance for specification option:

To ISO 4586-2.

Adhesion

4.25 MPa/Nmm².

Guidance for specification option:

To EN 1542.

(To ISO 2409 Class 1).

Hardness

9 H.

Guidance for specification option:

Wolff-Wilborn Hardness Test.

Flexibility

20 mm.

Guidance for specification option:

To ISO 1519.

Chemical resistance

Very good.

Slip resistance

34 PTV.

Guidance for specification option:

To BS7976-2.

Volatile organic compound (VOC) level

90 g/L.

Literature

Data Sheet: Cold Set Coating

Data Sheet: Cold Set Coating

Similar products from Watco UK Ltd

Chemi-Coat® Acid Strength

Chemi-Coat® Acid Strength

Chemi-Coat® Range

Chemi-Coat® Range

Epoxicote High Build

Epoxicote High Build

Epoxicote High Build Anti-slip - 100% solids epoxy resin coating

Epoxicote High Build Anti-slip - 100% solids epoxy resin coating

Epoxicote High Build Rapid

Epoxicote High Build Rapid

Epoxy Gloss Coat & Epoxy Matt Coat - Two-Part water-based epoxy resin coating

Epoxy Gloss Coat & Epoxy Matt Coat - Two-Part water-based epoxy resin coating

Food Safe Coating

Food Safe Coating

Plant Room Coating

Plant Room Coating

Protecta-Coat Range

Protecta-Coat Range

Safety Coat Cold Cure

Safety Coat Cold Cure