NBS Source
I'm a manufacturer

Crystalline Waterproofing of Concrete Newton HydroCoat 104 Super - Crystalline Waterproofing of Concrete

Verified by manufacturer 3 months ago

Newton Waterproofing Systems

Applied to the surface of concrete, HydroCoat 104 Super provides in-depth protection against the movement of moisture through the capillaries and hairline cracks.

Jump to:
BOS
+44 (0)1732 360095 Website

Application

HydroCoat 104 is typically applied in...

  • Pile caps and ring beams.
  • Support plinths.
  • Sealing of concrete surfaces.
  • Isolation of internal walls from moisture in the kicker joint.
  • Isolation of internal walls from moisture at the abutment with earth-retained walls.

Description

HydroCoat 104 is applied to the surface of concrete to provide in-depth protection against the movement of moisture through the capillaries and hairline cracks within the concrete. It consists of Portland cement, specially treated quartz sand and a compound of active chemicals. HydroCoat / HydroTank 104 is supplied in powdered form and is either sprinkled onto fresh concrete or is mixed with water as a carrier and brush or spray applied as slurry for application to fully cured or older concrete or vertical surfaces.


The active chemicals combine with the free lime and moisture present within the capillaries to form insoluble crystalline complexes which effectively block the capillaries and any minor shrinkage cracks to prevent any further movement of moisture to provide a totally dry surface to the concrete.


Large areas can be quickly treated with HydroCoat 104. The speed of application and the low material application rate (1 kg/m²) makes this product a very low-cost option for various scenarios.


Because HydroCoat / HydroTank 104 penetrates deep into the concrete, it does not leave a physical membrane to the surface of the concrete element and so is completely unaffected by loadings imposed by further elements of the build. New concrete elements are placed ‘concrete to concrete’ with no potential for slip or separation as is the case with physical membranes.


Surface preparation is required, as is protection after application - consult manufacturer for details.


Features and benefits:

  • Single component.
  • Ease of application – sprinkled onto new concrete and applied as a simple slurry to vertical and cured concrete.
  • Permeates deep into the concrete to form a barrier against moisture that cannot be damaged or punctured.
  • Loading capabilities only limited by the strength of the concrete.
  • No physical membrane – subsequent concrete placement is ‘concrete to concrete’.
  • Can be applied by airless spray for quicker application.
  • Concrete treated with HydroCoat / HydroTank 104 remains vapour permeable, allowing the structure to breathe.
  • Easy to detail and specify as the concrete surface becomes the membrane.
  • HydroCoat / HydroTank 104 requires controlled curing. Once the HydroCoat / HydroTank 104 begins to cure, moisten with a fine fog spray of water 2–3 times a day for three days. In hot or windy conditions, water spray should be applied more frequently.
  • Cost-effective alternative to conventional physical membranes.


Curing:

  • To be kept rain-free: For 3 hours (at all temperatures).
  • Ready for temporary traffic/ protection boards: After 3 hours (at all temperatures).
  • Initial set: At 5°C: After 6 hours; at 10°C: After 4 hours; at 15°C: After 2 hours; at 20°C: After 1 hour; at 25°C: After 45 minutes.
  • Fully cured: After 28 days.

General information

Color

Grey

Finish

Smooth

Material

Guidance for specification option:

Portland cement, specially treated quartz sand and a compound of active chemicals. Crystalline waterproofing of concrete.

Shape

Formless

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

60 year

Uniclass

Pr_20_31_53_18 Crystallization active slurry mortarsPrimary

CAWS

E10/418 Proprietary admixture

J10/130 Proprietary crystallization active mortar

Product range

Liquid Waterproofing Membranes

Specification data - Crystallization active slurry mortars

Third party product certification

To BS EN 1992 (Eurocode 2), BS EN 1542, BS EN 1015, DIN 1048-5 and to BS EN 476-4.

Density

1.25.

Application rate

1 kg/m².

Application temperature

+5°C to +35°C.

Service temperature

-15°C to +180°C.

Odour

None.

VOC content

0%.

Adhesion to concrete

> 0.8MPa BS EN 1542.

Tensile Adhesion

0.7 MPa BS EN 1015-12.

Elongation

3% to 5%.

Loading capability

Strong as concrete applied to. BS 4551.

Water permeability

<5.0 x 10-13 BTD/TP/02/2002.

Water penetration

<20 mm DIN 1048: Part 5:1991.

Fire testing - non combustibility

Non-combustible BS 476-4.

Sustainability data

Contains Red List materials

No

Country of material origin

Belgium

Country of product manufacture

Belgium

Recyclability

0

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

0 %

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit

Revit 2016

5

IFC

IFC2X3

2

Literature

Newton HydroCoat 104 Super TDS

Newton HydroCoat 104 Super TDS

Case studies

Waterproofing a Basement Office, London

Waterproofing a Basement Office, London

Basement Extension to a Grade 2 Listed Building, London

Basement Extension to a Grade 2 Listed Building, London

Similar products from Newton Waterproofing Systems

Newton HydroCoat Tanking Slurry - BBA Type A Cementitious Waterproof Coating and Tanking Membrane - Cementitious Waterproof Coating

Newton HydroCoat Tanking Slurry - BBA Type A Cementitious Waterproof Coating and Tanking Membrane - Cementitious Waterproof Coating