Verified by manufacturer 10 months ago
CS Louvres SLA-Z - Aluminium blades, Z profile
Louvres providing visual screening of plant or other equipment, typically used where rain penetration is not a concern. Continuous appearance.
For provision of visual screening of plant or other equipment, typically used where rain penetration is not a concern. Intended for use where:
Louvres providing visual screening of plant or other equipment, typically used where rain penetration is not a concern.
Features and benefits:
Color | Silver Grey White Other |
Finish | Mill Anodized Powder-coated |
Material | Aluminium Polyvinyl chloride (PVC) |
Length | 70 mm Guidance for specification option: Louvre depth. |
Width | Bespoke |
Height | Bespoke |
Uniclass | |
CAWS | L10/54 Louvres H11/140 Louvres L10/650 Metal louvres |
Product range |
Size (l x w x d) | Manufacturer guidanceInsert requirements (height x width) or insert As drawing or As schedule. Louvre depth: 70 mm. |
Material | Aluminium.Guidance for specification option: Aluminium alloy 6063-T5. |
Finish | Mill.Anodized (clear).Anodized (colour).Guidance for specification option: Insert colour requirements. Polyester powder-coated finish, matt, colour.Guidance for specification option: Insert colour requirements. Standard for polyester powder-coated finishes. 30 gloss units. Polyester powder-coated finish, gloss, colour.Guidance for specification option: Insert colour requirements. 70 gloss units. Manufacturer guidanceLouvre blades only; see below for mullions. |
Colour | As Finish.Manufacturer guidanceLouvre blades only; see below for mullions. |
Construction | Louvre blades to be clipped into vertical mullions on site.Guidance for specification option: Blades and mullions to be supplied pre-cut to suit overall installation size. Vertical mullions to be positioned at maximum 1500 mm centres and at maximum 200 mm from installation ends (based on 2 kPa wind load). Suitable support structure must be provided for fixing vertical mullions to. |
Louvre configuration | |
Number of banks | One. |
Blade orientation | Horizontal.Guidance for specification option: Standard. Horizontal, inverted.Guidance for specification option: Can be installed inverted for better screening of rooftop areas. |
Blade pitch | 100 mm. |
Accessories | None.Bird/ vermin guard.Guidance for specification option: Galvanized steel welded mesh as standard. Stainless steel mesh or expanded aluminium alloy mesh also available. Insect mesh.Guidance for specification option: PVC-coated fibreglass as standard; stainless steel mesh available on request. Louvred door(s).Guidance for specification option: Consult manufacturer for options and insert requirements.
|
Blanking Plates | Not required. Single-skin aluminium panels, to match louvre and/or mullions. Guidance for specification option: 2 mm-thick aluminium as standard. Single-skin aluminium panels, mill finish. Guidance for specification option: 2 mm-thick aluminium as standard. Single-skin aluminium panels, other colour/ finish. Guidance for specification option: 2 mm-thick aluminium as standard. Specify colour/ finish required. Insulated panels incorporating A1-classified non-combustible stone wool core. Guidance for specification option: Insulation core material faced on both sides with a 1 mm-thick aluminium sheet and set within an aluminium channel frame. Supplied in sizes to match louvre sizes. Can be pre-fitted to modules if required. |
Mullions | Mill. Guidance for specification option: Standard. To match blades. |
CS Louvres - Architectural Line Louvres
CS Louvres Rain Defence Louvre B-7505
CS Louvres Rain Defence Louvre PL-5700
CS Louvres Rain Defence Louvre RS-5605
CS Louvres Rain Defence Louvre RS-5900
CS Louvres Rain Defence Louvre RSH-5700AL
CS Louvres Rain Defence Louvre RSV-5700
CS Louvres Ventilation Louvre A-3105
CS Louvres Ventilation Louvre A-3105C
CS Louvres Ventilation Louvre A-4085