Dash Receivers

K Rend Dash Receivers are cement based, polymer modified and self coloured, requiring only the addition of water and ten minutes mixing time. It is normally applied over K Rend Base Coats as a background surface for dry dash or roughcast finishes.

Silicone Dash

Silicone Dash is specifically designed to incorporate the benefits of silicone water repellents into a cement-based render system. Silicone adds a high water repellent quality, while allowing water vapour to pass freely through the render; thus the amount of dirt adhering to the surface is greatly reduced, ensuring a freshly rendered appearance for a prolonged period of time. This dry surface also improves the resistance of the finished render to algae growth and the natural phenomenon of lime-bloom.

Standard Dash

For general use, normally applied on to K Rend Base Coats. Apply 6–10 mm thick, depending on the size of the dashing aggregate.

Silicone Spray Dash

A silicone enhanced dash receiver specifically designed for spray application. Silicone Spray Dash can be applied on to a K Rend base coat, or as a one-coat finish, applied using two passes and allowing the first pass to stiffen prior to application of a second pass. Apply 6–10 mm onto a basecoat, or 16–20 mm in two passes if applied directly to blockwork.

Overcoating Silicone Dash

Overcoating Silicone Dash is specifically designed for refurbishment over existing dry dash finishes. Apply 8–10 mm thick.

Features and benefits:

• Low maintenance.
• Water resistant and extremely durable.
• Available in a wide range of attractive colours.
• Suitable for different substrates.
• Excellent workability and open time properties when used as backgrounds for 4–12 mm dry dash or roughcast finishes.
• The finished thickness is normally determined by the size of the aggregate.
• Kitemarked and CE marked to BS EN 998:1.
• Manufactured in accordance with a quality system approved to BS EN ISO 9001:2015 by BSI registration number FM 85394.