Decimetric® Classic Sinks and Worktops - Modular Stainless Steel System

Decimetric® Classic stainless steel sink and worktop configurations form part of the Decimetric® system of modular kitchen furniture and equipment.

Units can be combined with Decimetric® legs and frames, including cabinets and drawers. Specify legs and frames, cabinets and drawers seperately.

Type:

• EL: 40 mm watersafe edge.
• ELU: 40 mm watersafe edge with 100 x 20 mm rear upstand.
• EP: 40 mm plain edge.
• EPU: 40 mm plain edge with 100 x 20 mm rear upstand.

Bowls (For 600 and 700 mm worktop widths):

• CG2.6: Single bowl Ø260 x 130 mm deep.
• CG3.0: Single bowl Ø300 x 180 mm deep.
• CG3.8: Single bowl Ø380 x 180 mm deep.
• CG4.2: Single bowl Ø420 x 180 mm deep.
• G13: Single bowl 150 x 300 mm, 150 mm deep.
• G33: Single bowl 330 x 300 mm, 170 mm deep.
• G44: Single bowl; 400 x 400 mm, 250 mm deep.
• DG44: Double bowl; 2 x G44 bowl units, 46 mm between bowls.
• G54: Single bowl; 500 x 400 mm, 250 mm deep.
• DG54: Double bowl; 2 x G54 bowl units, 46 mm between bowls.
• G94: Single bowl; 860 x 420 mm, 200 or 350 mm deep.
• G104: Single bowl; 960 x 420 mm, 200 or 350 mm deep.

Bowls (For 700 mm worktop width):

• G45: Single bowl; 400 x 500 mm, 250 mm deep.
• DG45: Double bowl; 2 x G45 bowl units, 46 mm between bowls.
• G55: Single bowl; 500 x 500 mm, 300 mm deep.
• DG55: Double bowl; 2 x G55 bowl units, 46 mm between bowls.
• G65: Single bowl; 600 x 500 mm, 300 mm deep.
• DG65: Double bowl; 2 x G65 bowl units, 46 mm between bowls.
• G125: Single bowl; 1160 x 500 mm, 200 or 350 mm deep.
• G155: Single bowl; 1460 x 500 mm, 350 mm deep.
• G175: Single bowl; 1660 x 500 mm, 350 mm deep.