NBS Source
I'm a manufacturer
Compare variants

Dribond SINGLEglazed SG30FS Concept Fire Rated System - Fire-rated Glazed Partition System

Verified by manufacturer 1 month ago

E60 (60 minutes integrity)

Dribond Limited Variant:

E30, E45 or E60 glazed internal partitioning system with an ultra-slim aluminium profile.

Jump to:
+44 (0) 1142 430808 Website

Application

Internal partition panels.

Description

E30, E45 or E60 glazed partition with an ultra-slim profile.


Features and benefits:

  • Up to 35 dB Rw sound reduction.
  • 25 mm slim depth.
  • 30 mm narrow width.
  • Plant-on mullions/transom option.
  • Choice of two different door frames and door options.
  • Up to 2600 mm high.
  • Aluminium can be powder-coated to any RAL colour.
  • A range of ironmongery is available to meet with the aesthetic requirements of each project.
  • Excellent acoustic attenuation.
  • The system incorporates fully glazed single door and double door sets utilizing a slimline aluminium frame which can be installed at full height or with glass overpanels, and with or without side screens. Glass directly glazes into the door frame for flush fit appearance.


Standard and acoustic alternatives are also available, both specified separately.


For fire and acoustic performance alternative please see TG90FS TWINglazed System (E) fire rated or TG100FS TWINglazed System (Ei) fire rated specified separately.

General information

Color

Clear

Guidance for specification option:

Glazing.

Silver

Guidance for specification option:

Aluminium - polished, linished or anodized.

Other

Guidance for specification option:

Aluminium, powder-coated.

Finish

Powder-coated

Guidance for specification option:

Polyester powder-coating.

Anodized

Guidance for specification option:

Etch & anodized.

Stainless steel

Guidance for specification option:

Simulated.

Wood grain

Guidance for specification option:

Simulated.

Polished

Show more

Material

Aluminium

Glass

Shape

Rectangle

Length

Bespoke

Width

30 mm

Guidance for specification option:

Screen profile depth (base/ head/ wall).

Height

Bespoke

Guidance for specification option:

Maximum 3000 mm.

Warranty description

Lifetime

Guidance for specification option:

Applies to most components (aluminium; glass; retaining brackets; intumescents). Conditions apply; consult manufacturer for details.


Surface finish: minimum 25 years warranty.

Rubber gaskets: 50 years.

Uniclass

Pr_25_71_57_60 Partition panelsPrimary

CAWS

K30/10 Relocatable partition system

K30/130 Relocatable partition system

Specification data - Partition panels

Third-party certification

Warringtonfire certification available on request.

Standard

Integrity only.

Unit size

-

Thickness

30 mm.

Guidance for specification option:

Profile depth (screen).

Partition height (nominal)

Guidance for specification option:

Insert requirements, maximum 2700 mm.

Maximum applies to screens; insert details for door(s) separately below, including side screens and/or overpanels is required.

Width (nominal)

Guidance for specification option:

Insert requirements, including drawing or schedule reference as required.

Deflection allowance (maximum)

-

Head

No deflection (25 x 30 mm top track head).

±25 mm deflection (45 x 30 mm top track head).

Floor

25 x 30 mm.

Verticals

45 x 30 mm.

25 x 30 mm.

Panel partition type

Glazed.

Framing, fixing points and joints

25 x 30 mm aluminium insulated channels with Dribond® DriJoint®/ fire rated multi-function posts.
Track head as Deflection allowance above.

Solid panels

-

Type

Not required.

Alitek companel.

Finish and colour

Guidance for specification option:

Omit if not applicable.

Otherwise insert 'As frame', or consult manufacturer for options and insert colour requirements.

Joint treatment

-

Type

Dribond® DriJoint®.

Finish and colour

Guidance for specification option:

'As frame', or consult manufacturer for options and insert colour requirements.

Glazed panels

-

Type

Guidance for specification option:

SINGLEglaze® channel; consult manufacturer's literature for options and insert glazing requirements.

Standard option 11–15 mm Schott PYRANOVA® multi-layer laminated fire glass, maximum height 2500 mm.

Manufacturer guidance

Upgradeable glass options available; consult manufacturer for details. Note: this may affect performance details.

Additional features

Not required.

90° multi-function post.

Plant-on mullions/ transoms.

Door arrangement

-

Type

Dribond® Alitek DR35FS/ FR30FS doorset, single door leaf.

Dribond® Alitek DR35FS/ FR30FS doorset, double door leaf.

Dribond® Alitek DR35FS/ FR30FS doorset, double door leaf and side screens.

Dribond® Alitek DR35FS/ FR30FS doorset, double door leaf and overpanel.

Dribond® Alitek DR35FS/ FR30FS doorset, double door leafs, side screens and overpanel.

Solid core timber door, single leaf.

Guidance for specification option:

Up to 46 mm thickness; consult manufacturer for options and insert requirements.

Include details for glazed side screens and/or overpanels if required.

Solid core timber door, double leaf.

Guidance for specification option:

Up to 46 mm thickness; consult manufacturer for options and insert requirements.

Include details for glazed side screens and/or overpanels if required.

Manufacturer guidance

Insert dimensions or refer to drawing/ schedule.

  • Maximum door frame height: 2600 mm.
  • Maximum door leaf width x height: 1100 x 2550 mm.

Locking

Not required.

Dribond® fire-rated lever latch lock with euro cylinders and lever handles.

Guidance for specification option:

Consult manufacturer for details.

Dribond® fire-rated flush morticed mag-shear electronic locking.

Guidance for specification option:

Consult manufacturer for options and insert requirements.

Manufacturer guidance

Options may overlap with ironmongery choices; see Hardware below.

Door frames

Aluminium, 30 x 30 mm.

Guidance for specification option:

Extruded to BS EN 755-9:2001, specification 6063 T6.

Aluminium, 55 x 55 mm.

Door panels

-

Type

To match glazed panels.

Manufacturer guidance

Also comprises SiNGLEglaze channels, aluminium extruded to BS EN 755-9:2001, specification 6063 T6. Uses 75% recycled aluminium.


Aluminium colour/ finish to match other components unless specified otherwise.

Vision panels

Not available.

Additional apertures

Guidance for specification option:

Insert requirements or omit.

Ceiling

-

Joint treatment

Dribond joint.

Trims

Not applicable.

Hardware

Guidance for specification option:

Consult manufacturer for options and insert requirements.

Ironmongery includes Dribond® fire-rated back-to-back pull handles available in 1200, 950 or 600 mm, with push plate option.


Note that the 'Dribond® fire-rated lever latch lock with euro cylinders lever handles' is specified under Locking above.

Seals

Manufacturer's standard.
Dribond® Alitek DR35FS fire door has twin smoke seals around entire perimeter of the door leaf and has been tested to EN/ BS 1364.

Guidance for specification option:

  • Dribond® Alitek ADF fire door is a completely self-sealing system with twin fire and smoke seals around the perimeter of the door leaf and additional central intumescent fire seal which combine gives a 90-minute fire seal as standard.
  • Dribond® Alitek DF62 fire door frame is a completely self-sealing system including around the perimeter.
  • Within the door jamb it has intumescent fire seals which can give up to 120 minutes where specified (standard 90 minutes).

Other features

Guidance for specification option:

Consult manufacturer for options and insert requirements, or omit.

Finish (aluminium components)

Polyester powder-coated, colour.

Guidance for specification option:

Consult manufacturer for options and insert colour requirements.

Polished and chemically brightened.

Linished and chemically brightened.

Etched and anodized.

Guidance for specification option:

Consult manufacturer for options and insert requirements.

Manufacturer guidance

Applies to all components unless specified otherwise.

Fire resistance (integrity)

To BS EN 1364-1, E60.

Sound insulation

Door leaf: 42 dB (Rw).
Partition screen: 35 dB (Rw).

Guidance for specification option:

Standard.

Consult manufacturer for details if upgradeable glass options are required.

Load

0.74 kN/m.

1.5 kN/m.

3.0 kN/m.

Manufacturer guidance

Nominal line load criteria of "accidental impact load" utilized.

0.36 kN/m applied as short term load at 1100 mm above FFL.

Consult manufacturer's technical team for details.

Manifestation

Allowance of two rows of 50 mm dots.

Allowance of two rows of 50 mm squares.

Opal frost.

Artwork/ custom.

Guidance for specification option:

Insert details.

Manufacturer guidance

To specifier's choice and in accordance with the requirements of approved document K.

Select multiple options e.g. for door as required.

Accessories/ Special requirements

Not applicable.

Sustainability: system to conform to the requirements of BREEAM.

Sustainability: system to conform to the requirements of SKA.

Sustainability: system to conform to the requirements of LEED.

Other.

Guidance for specification option:

Consult manufacturer for options e.g. BIM and insert details.

Manufacturer guidance

Insert details as required.

Door closers

Surface mount slide arm, soft close.

Surface mount slide arm, non-soft close.

Not required.

Strength grade

Manufacturer's standard.

Guidance for specification option:

  • Provided independently certified evidence that all specifications variants of components comply with specified performance requirements. The frames comply with all relevant British Standard specifications, codes of practice and statutory requirements (including all revisions and amendments) as well as the guides and recommendations laid down by the relevant trade organization relating to their performance, constituent materials, method of assembly and use.
  • All aluminium profiles are extruded to BS EN 755-9:2001, specification 6063 T6.
  • For glass non-load bearing screens not protecting a change in adjacent floor level <380 mm.
  • For glass load resistance criteria, see Load above.
  • BS 5234 n/a to “all” glass partition screens.
  • Nominal line load criteria of “accidental impact load” utilized.
  • 0.36 kN/m applied as a short term load at 1100 mm above FFL.
  • Glass deflection limited to L/65 or 25 mm.
  • Maximum deflection and stress in accordance with the glass performance requirements of EN 572/ EN 12150/ EN 12543/ EN 14179 (where heat soaked).
  • Building Regulations Part N (BS 6262) + InsStucEng publication “structural use of glass in buildings” BS 6180:2011 barriers in and about buildings for Atria or protected change in adjacent floor levels horizontal uniformly distributed line load 1100 mm above FFL (Lateral deflection limit L/65 or 25 mm, which ever is less relative to glass fixings) structural glass based on line load and attendant UDL + point load.

Sustainability data

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Embodied carbon

A1-A3 (production stage) as defined in BS EN 15804

4 kg CO₂ eq/kg

Self declared

Recyclability

System is fully recyclable

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

72 %

© 2024 NBS Enterprises Ltd. All rights reserved.