NBS Source
I'm a manufacturer
Compare variants

Dura Slab Structural Stair Treads - GRP structural stair treads

Verified by manufacturer 3 months ago

Structural stair tread, 65 mm

Dura Composites Ltd Variant:

Dura Slab Structural Stair Treads incorporate a number of ground-breaking features. Their single unit construction speeds up install times, reducing costs and limiting disruption to end users.

Jump to:
+44 (0)1255 423601 Website

Application

Suitable for new build footbridges and for essential footbridge refurbishment works, including areas in close proximity to overhead power lines or electrified areas.

Description

Known as Dura Slab Structural Stair Treads, they are made from pultruded GRP and are lightweight, high strength, anti-slip, non-corrosive and non-conductive.


Designed for use on footbridges and staircases, they overcome all of the problems normally associated with the use of traditional materials such as wood. Whilst timber treads need regular refurbishment as they are prone to rotting which compromises the structure and provides potential “slip or trip” risks for pedestrians, our GRP treads are safe, easy to work with and low maintenance.


Where previous composite treads on the market have been limited in span capabilities, Dura Composites can span up to 2.1m clear open span, achieving the required 5kN/m2 at L/200 deflection, meaning that additional supports can be avoided in most scenarios.


Hidden fixings minimise trip hazards and provide an aesthetically pleasing finish, whilst the in-built risers act as debris shield. Added spine supports can enable greater spans with minimal deflection. 


Also included is a very slight fall to assist in the prevention of water pooling which can lead to problems with ice in the winter months. No heavy lifting equipment is needed as all panels can be easily manhandled even in full stock lengths.


NEW Advanced Tri-Tone Grit

Dura Composites’ Tri-Tone gritted surface offers superior durability and performance for high-traffic areas and blends with a range of surroundings. Independently tested (in accordance with BS 7976-2:2002+A1:2013), Tri-Tone maintains a fantastic 97.5% of its original slip resistance after 1.1 million footfalls & delivers an 8% increase in slip resistance in wet conditions vs. our previous generation Dura Platform and Dura Slab Structural Stair Tread and Landing surface.


Features & Benefits:

  • Anti-slip surface.
  • High strength.
  • Non-corrosive.
  • Non-conductive.
  • Lightweight.
  • Single unit construction and built-in rise allows for an easy, rapid installation.
  • Built-in fall assists with drainage and reduces pooling on stair surfaces.
  • Ongoing maintenance not required: will not rot, corrode or lose colour throughout its design life.


Dura Slab Structural Stair Treads work in conjunction with Dura Slab Structural Landings.

General information

Color

Grey

Other

Finish

Anti-slip

Material

High quality glass reinforced plastic (GRP)

Shape

Rectangle

Length

1830 mm

2150 mm

4020 mm

2050 mm

3020 mm

Width

320 mm

284 mm

Height

65 mm

90 mm

Uniclass

Pr_25_30_30_81 Solid glass fibre-reinforced plastics (GRP) platesPrimary

CAWS

L30/20 Stairs

L30/270 Stairs

L35/350 Stairs

Q55/370 Composite sections

Q55/130 Footbridge

Product range

Access Structures
d² Dura Slab

Specification data - Solid glass fibre-reinforced plastics (GRP) plates

Colour

Dark grey with white stair nosing.

Dark grey with yellow stair nosing.

Guidance for specification option:

Denotes change of level.

Manufacturer guidance

Insert number of each tread type required or include drawing reference.

Size

-

Length x width

1830 x 320 mm.

Guidance for specification option:

Weight: 12.75 kg per linear metre.

Clear span: 2100 mm 5 kN/m² at L300 deflection.

2150 x 320 mm.

Guidance for specification option:

Weight: 12.75 kg per linear metre.

Clear span: 2100 mm 5 kN/m² at L300 deflection.

4020 x 320 mm.

Guidance for specification option:

Weight: 12.75 kg per linear metre.

Clear span: 2100 mm 5 kN/m² at L300 deflection.

Depth

65 mm.

Slip resistance value – water wet (minimum)

Manufacturer's standard.

Guidance for specification option:

Consult manufacturer for details.

Fixing

Dome washer, countersunk bolt with Rawl nut and nylon collar

Guidance for specification option:

Network Rail-approved fixing; consult manufacturer for details.

Dome washer, countersunk bolt with Nyloc nut and penny washer.

Guidance for specification option:

Network Rail-approved fixing; consult manufacturer for details.

Countersunk bolt with Nyloc nut and penny washer.

Guidance for specification option:

Network Rail-approved fixing; consult manufacturer for details.

Finishing Options

Not required.

Waterproof sealant.

Guidance for specification option:

Prevents water damage to structure.

Landing support orientation.

Guidance for specification option:

For use when structural supports are front and back edge of landing or under 2500 mm. Packed to match structural stair slabs.

Includes inbuilt yellow nosing.

Half-landing support orientation.

Guidance for specification option:

For use when structural supports are front and back edge of landing or under 2500 mm. Packed to match structural stair slabs.

Includes inbuilt yellow nosing.

Transverse spanning landing.

Guidance for specification option:

For use when structural supports run parallel. Packed to match structural stair slabs.

Includes inbuilt yellow nosing.

Accessories

None.

Non-structural Dura stair tread cover.

Guidance for specification option:

Cover only. 3660 x 345 mm, 3.99 kg per linear metre.

Consult manufacturer for details.

Deleted riser nose.

Guidance for specification option:

Allows inspection of bridge cleats; consult manufacturer for details.

Deleted riser rear.

Guidance for specification option:

For deck extension on top of landing; consult manufacturer for details.

Deleted riser rear and nose.

Guidance for specification option:

Provides clear access of cleats from all sides; consult manufacturer for details.

Show more

Sustainability data

Contains Red List materials

No

Country of material origin

China

Country of product manufacture

China

Embodied carbon

A1-A3 (production stage) as defined in BS EN 15804

3.13 kg CO₂ eq/unit

Self declared

Recyclability

Return to manufacturer or downcycle

BIM objects

Platform Compatible Version
Revit
-

1

Literature

Embodied Carbon Report of our Pultruded GRP Products

Embodied Carbon Report of our Pultruded GRP Products

Case studies

Kings Cross Station, London

Kings Cross Station, London