Verified by manufacturer over a year ago
Bituminous roofing waterproofing membrane.
Suitable to waterproof any building structure subject to mechanical stress and dimensional variations.
High performance roofing waterproofing membrane based on a modified bituminous compound constructed from distilled bitumen and highly resilient elastomeric (thermoelastic) resin.
It is reinforced with a non-woven 'spunbond' polyester fabric that guarantees excellent mechanical performances with high puncturing resistance, good tensile strength and multidirectional elongation. The SBS elastomeric compound gives the material outstanding performance at the lowest temperatures.
The underside of Elastobond S6 and Elastobond S6 Mineral is protected by Polyflam, a special polyethylene film which melts upon torching. In the mineral version, the top surface is protected by a uniform layer of slate chippings and has a longitudinal selvedge for overlapping making application fast and secure.
Color | Green Grey Red White Manufacturer guidanceAlso available in Brun Bourgogne and Dark Brown. |
Finish | Slate Polyflam film |
Material | Bitumen Elastomeric (thermoelastic) resin Non-woven 'spunbond' polyester fabric |
Uniclass | |
CAWS | J41/115 Single-layer reinforced bitumen membrane warm deck roof covering J41/125 Single-layer reinforced bitumen membrane inverted roof covering J41/135 Single-layer reinforced bitumen membrane cold deck roof covering J41/405 Single-layer reinforced bitumen waterproof covering |
Material | |
Bitumen modification | Distilled bitumen.Elastomeric. |
Surface finish | |
Top | Elastobond S6: Polyflam film.Elastobond S6 Mineral: Slate upper face. |
Underside | Elastobond S6: Polyflam film.Elastobond S6 Mineral: Polyflam film lower face. |
Colour | Not applicable.Guidance for specification option: For Elastobond S6. Brun Bourgogne.Dark Brown.Green.Grey.Red.White. |
Product Reference | Elastobond S6 Guidance for specification option: 4 mm thickness. Elastobond S6 Mineral, 4.5 kg/m² Elastobond S6 Mineral, 5.0 kg/m² |
Roll size | 1 x 8 m. |
TensileStrength | To BS EN 12311-1, MD: 800 N/50mm; TD: 500 N/50mm. |
Elongation | To BS EN 12311-1, MD: 45%; TD: 50%. |
Resistance to tearing | To BS EN 12310-1, 150 N. |
Puncture resistance | Static puncturing (to BS EN 12730): 15 L. Dynamic puncturing (to BS EN 12691): 10 L. |
Flexibility at low temperature | To BS EN 1109, -15°C. |
Dimensional stability | To BS EN 1107-1, ≤0.5%. |
Resistance to heat classification | To BS EN 1110, 150°C. |
Water tightness (to EN 1928) | To BS EN 1928, ≥60 kPa. |
Water resistance | To BS EN 1928, ±2%. |
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
Platform | Compatible | Version |
---|---|---|
- | 1 | |
- | 1 |