energystore superbead + Beam & Block Insulation System

The energystore+ range dramatically reduces embodied carbon, using sustainable bio-fuel sources during manufacturing. energystore+ is independently assessed and certified by REDcert², Europe’s leading certification scheme for sustainable biofuel sources.

Innovative insulation solution for beam and block floors enables project savings, thermal optimization and real-life performance.

Features and benefits:

• Designed for maximum efficiency.
• Reduced site waste.
• No storage of off-cuts of material.
• Lower cost than traditional infill blocks.
• Improved programme speed.
• Excellent thermal performance; no joints required.
• Drill holes must be sized between 22—26 mm.
• Robust Details for masonry construction satisfying Building Regulations Approved Document E - enabling a single product to be used within the cavity and the party wall.
• Achieves REI45 fire resistance in accordance with BS EN 1363.
• BRE GreenGuide A+ rating.
• LABC warranty.
• ISO9001, ISO14001, ISO45001 certificates.

Installation:

• Level ground and build up external wall. With Superbead there’s no need for vents.
• Lay DPM across ground and up inner leaf to meet the DPC.
• Lay any buildings services necessary.
• Install beam and block floor as normal.
• Once the Beam and block floor has been installed the approved installer will drill holes following the Superbead drill pattern and then inject the insulation into the void beneath.
• Floor is ready for screed and follow-on trades.