Verified by manufacturer 4 months ago
Fabreeka® Pad bonded to Teflon® (PTFE) surface.
Fabreeka-PTFE bearing pads are used for conditions where it is necessary to accommodate lateral movement (expansion). The PTFE provides a low friction sliding surface on the Fabreeka bearing pad, which distributes high compressive loads and accommodates rotations. In a structural bearing design, polished stainless steel is typically used as the smooth surface that the PTFE slides against.
Fabreeka-PTFE bearing pads are manufactured using Fabreeka pad material with a Teflon® (PTFE) surface. The virgin Teflon is heat cured to the Fabreeka pad using a rigid, laminated thermoplastic (LTP). The rigid LTP layer prevents the PTFE from expanding/flowing under compressive load and rotation (also known as “cold flow”), as the bearing pad compresses.
Features and benefits:
Color | Grey |
Finish | Natural |
Material | Composite |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Warranty description | One year |
Uniclass | |
CAWS | E40/445 Insulating load transfer systems E40/445 Insulating load transfer systems E40/440 Load transfer systems |
Load capacity (maximum) | 10 000 psi.Guidance for specification option: The pads shall withstand compressive loads perpendicular to the plane of laminations of not less than 10,000 psi before breakdown. |
Allowable movement of sliding bearings | 0.02 SI.Guidance for specification option: Accommodates lateral movement and rotation. Allows for rotations up to 0.02 radians under high pressure. |
Execution | Installing sliding surface bearings. |
Hardness | 50–65. Guidance for specification option: ASTM D2240 50-65 Durometer D. Manufacturer guidanceAt 78°. |
TensileStrength | 2800 psi. Guidance for specification option: ASTM D4894/4895. Manufacturer guidanceMinimum. |
Elongation | 200%. Guidance for specification option: ASTM D4894/4895. Manufacturer guidanceMinimum. |
Deformation capability | 4%. Guidance for specification option: ASTM D621 4% (max) 78°F - 2,000 psi (1/2” x 1/2” x 1/32”). Manufacturer guidanceDeformation under Load - Maximum. |
Specific gravity | 2.14–2.21. Guidance for specification option: ASTM D792. |
Thickness | 3.1 mm. 3.9 mm. 4.7 mm. 5.5 mm. 6.3 mm. |
Contains Red List materials | No |
Country of material origin | United States |
Country of product manufacture | United States |
Material | Composite |
Recyclability | Material is a composite and therefore not recyclable, in ideal conditions product lifespan can be up to 50 years. |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |