NBS Source
I'm a manufacturer

Fibo 950 100 mm 7.3 N Concrete Block Range

Verified by manufacturer 7 months ago

Lignacite Ltd

Lightweight concrete blocks suitable for general-purpose walling applications.

Jump to:
+44 (0)1842 810678 Website

Application

Fibo 850/950 are suitable for housing and building extension projects. They can also be used to construct walls in buildings where blockwork with a low self-weight has been specified (e.g., partition walls on floor slabs).


For use in separating walls meeting the requirements of Part E of the Building Regulations, we recommend the use of products from the Ash GP and Lignacrete ranges.


Typical locations include:

  • Inner and outer leaves of external cavity walls;
  • High-strength walls of up to 7.3 N.
  • Internal walls, including fire breaks.
  • Below ground (7.3 N/mm² strength blocks should be used for walls exposed to the external ground).


The blocks can accommodate drylining, dense plaster, finishing coats and external rendering. Consult manufacturer for further finish recommendations.

Description

Fibo 950 super lightweight concrete blocks are suitable for general-purpose walling applications. They provide a good base for plasters, renders and fixings.

They are also Category 1 masonry units manufactured under a BSI-certified Quality Management System, which is BS EN 9001 compliant.


Manufactured to BS EN 771-3, they consist of expanded clay aggregates and a mixture of other naturally occurring raw materials and cement. The clay aggregate is produced from carefully selected clays, which are bloated through heat expansion to create a low density, porous aggregate with numerous cavities. This makes Fibo 950 incredibly light and thermally efficient.


Features and benefits:

  • Provides a high level of thermal insulation, reducing the amount of additional insulation required after installation.
  • Lightweight, easy to handle, and quick to lay.
  • Loadbearing.
  • Provides a high level of fire protection (Class A1).
  • For use internally and externally, above and below ground.
  • Provides a strong background for direct application of plasters and renders (no bonding agents required).
  • Fixings will be held securely by the block (and can be nailed in directly).
  • Certification to BES 6001 will allow credits to be gained under environment assessment schemes such as BREEAM.
  • CE marked to BS EN 771-3.
  • For 3.6 N/mm² compressive strength, see Fibo 850 blocks; consult manufacturer for details.


Generally, the mortar type for work above ground level should be designation (iii) / Compressive Class M4. However, where it is needed to maximise the loadbearing capacity of the wall, designation (ii) / Compressive Class M6 mixes should be specified. Stronger mixes may also be required for work below ground. Consult manufacturer for details.


Vertical movement joints should be considered in accordance with masonry design codes and the recommendations of Published Document PD 6697, at 6.0-8.0 metre spacings. In areas of raised stress, such as above and below openings in external walls, the blockwork may need to be reinforced to restrain movement.


For use in separating walls meeting the requirements of Part E of the Building Regulations, we recommend the use of products from the Ash GP and Lignacrete ranges.

General information

Color

Grey

Finish

Textured

Material

Concrete

Guidance for specification option:

(expanded clay aggregates and other naturally occurring raw materials and cement).

Shape

Rectangle

Length

440 mm

Width

100 mm

Height

215 mm

Uniclass

Pr_20_93_52_01 Aggregate concrete blocksPrimary

CAWS

E60/297 Proprietary infill blocks

F10/18 Concrete facing blockwork

F10/355 Concrete common blockwork

Product range

Fibo Super-Lightweight Block Range

Specification data - Aggregate concrete blocks

Standard

To BS EN 771-3.

Block description

Fine textured, loadbearing units for facing and general purpose applications.

Appearance

Medium grey in colour with a fine textured surface.

Configuration

Group 1.

Compressive strength

-

Mean value

7.3 N/mm².

Category

M4.

Thermal conductivity

0.31 W/m·K at 3% moisture content (internal use).

Thermal resistance

0.32 m²K/W at 3% moisture content; 0.29 m²K/W at 5% moisture content.

Work sizes (length x width x height)

440 x 100 x 215 mm.

Tolerance category

D1.

Density

-

Net dry density

950 kg/m³.

Reaction to fire

Class A1.

Water vapour permeability

5/15 µ.

Moisture movement

0.6 mm/m.

Weighted sound reduction index, Rw

Rw 42–44 dB (dependent on application).

Guidance for specification option:

Plaster finish: 42 dB; plasterboard on dabs: 44 dB.

Fire resistance

Non-loadbearing wall (criteria E1): 4 hours; loadbearing wall (criteria RE1): 3 hours.

Third-party certification

BSI Kitemark approved.

Unit weight

9.5 kg.

Guidance for specification option:

Laid weight including mortar: 106 kg/m².

Sustainability data

Embodied carbon

A1-A3 (production stage) as defined in BS EN 15804

0.44 kg CO₂ eq/kg

Self declared

Guidance for specification option:

Rounded down to two decimal places; manufacturer's value is 0.443 kg·CO2e/kg.


This figure is derived from the carbon value as per the EPD divided by the unit mass (both are pro-rata’d from the 100 mm blocks).

Recyclability

100%

Literature

Fibo 850/950 Super Lightweight Range

Fibo 850/950 Super Lightweight Range

Case studies

The Paddocks

The Paddocks