NBS Source
I'm a manufacturer
Compare variants

Fischer Aquafficient - Heat Battery

Verified by manufacturer 8 days ago

Fischer Aquafficient - Aqua3

Fischer Heat UK Variant:

Heat battery for instant electric hot water heating.

Jump to:
+44 (0)116 2426436 Website

Application

Heat battery for instant electric hot water heating. Suitable for:

  • New-build Flats/ Houses.
  • Hospitals and Healthcare Facilities.
  • Restaurants and Cafes.
  • Schools and Universities.
  • Sports Facilities.
  • Hotels and Serviced apartments.

Description

Aquafficient is an innovative, modern and highly efficient solution to heating water. This instant electric water heater uses a single heating element and patented thermal storage technology, to provide instant hot water without the need for tanks. Instead, the hot water is produced from stored heat energy within a unique phase change material.


The unit stores heat in a unique phase change material, known as a heat battery. Once the battery has been fully charged, it will pass the heat energy that has been stored inside to the cold water coming into the unit.


The cold water comes into a highly efficient heat exchanger that has been embedded within the battery, and this transfer of heat only happens when hot water is called for. This instant electric water heater provides hot water until the battery is depleted. The battery will recharge itself to ensure you have access to hot water 24/7.


The instant electric hot water heater has a 'lifespan' of approximately 40,000 heating cycles which is equivalent to 50 years of use and is also supplied with a 5-year warranty.


With no requirement for additional valves or even a water discharge pipe, the installation is mess and stress-free.


The unit can store four times more heat than a domestic water cylinder and provides up to 370 Litres of hot water at 40 degrees centigrade, depending on the size of the unit installed. The product is half the height of an average water cylinder making it a discreet electric heater for hot water to residential housing, businesses and other commercial projects.


Compatible with Economy 7, Solar PV and other renewable electricity sources, helping to reduce carbon emissions.


Power is supplied to the Heat Battery via the Double pole isolating Switch, 16A (minimum). The Heat Battery will remain in operation whilst it is connected to the mains. The Heat Battery will switch off if disconnected from the power supply.


Features and benefits:

  • Long lifespan.
  • No maintenance required.
  • Hot water on demand.
  • Space saving.
  • Manufactured in the UK.
  • Compatible with solar PV.
  • Mess and stress free installation.
  • Equivalent Hot Water Cylinder Size: 71 L.
  • V40, Volume of Hot water available at 40°C: 85 L.
  • Energy efficiency rating class C.
  • Standby heat loss rate: 0.48 kWh per 24 h / 20 W.
  • Pressure loss characteristics: 20 L /min / 0.25 bar.
  • Electrical efficiency (nelecwh): 81.4%.
  • Annual electricity consumption (AEC): 54 kWh/annum.
  • Tapping cycle: S.

General information

Color

White

Finish

Painted

Shape

Rectangle

Length

575 mm

Width

365 mm

Height

440 mm

640 mm

870 mm

1080 mm

Warranty description

Five year

Uniclass

Pr_60_60_96_27 Electric instantaneous water heatersPrimary

CAWS

S90/360 Instantaneous water heaters, electric

Specification data - Electric instantaneous water heaters

Rating

Single 2.8 kW Heating Element.

Flow rate

Recommended maximum HW flow rate: 6 L/ min.

Accessories

Not required.

Solar.

Weight

72 kg (gross), 70 kg (net).

Guidance for specification option:

Net weight refers to an empty Heat Battery (i.e. no water in the tubes). Gross weight refers to tubes being filled with water.

Storage

Heat storage capacity: 3.5 kWh.

WaterContent

2.3 L.

InputPressure

Minimum mains supply pressure at inlet of Heat Battery: 0.15 MPa / 1.5 Bar.

MaximumWorkingPressure

1.0 MPa/ 10 Bar.

OutletTemperatureRange

45–55°C.

Power supply - single phase

~230 V.a.c.(7 W standby consumption).

Dimensions

575 x 365 x 440 mm.

Guidance for specification option:

L x W x H.

Sustainability data

Country of product manufacture

United Kingdom