Compare

FlexLap – Cut Edge Corrosion Treatment - Marine grade

Name: FlexLap – Cut Edge Corrosion Treatment - Marine grade
Brand: Liquasil Ltd
SKU: jSXgmXnaT8KMzrpKAz2xZS

Verified by manufacturer 3 months ago

Liquasil Ltd

Third party certifications:

BBA Agrément Certificate
Certificate type

Two-component, liquid, cut edge corrosion treatment for metal roofs.

Jump to:

+44 (0)1217 095352 Website

Application

For application to exposed metal substrate on metal roofs and cladding panels.

Description

Two-component, liquid, cut edge corrosion treatment for steel roofing sheets on non-domestic buildings.

Features and benefits:

Includes a marine-grade rust treatment.
Completely surface and wet tolerant - can be applied directly to wet substrates - therefore poor weather downtime during the preparation stage is significantly reduced.
Easy to apply via brush or roller.
Cost effective.
100% UV stable.
Insoluble in water.
Supplied with a 15-year product-only warranty when installed by a Liquasil Approved Installer.
Optional components for sealing overlapping roof sheets if required - HP Butyl Waterproofing Tape or High Modulus Silicone Sealant.

Approvals:

- SWT Corrosion Primer:

Surface & Wet Tolerant.
Marine Grade Primer.

- FlexLap:

Flexible silicone coating, solvent and VOC free. Must be applied to a bone-dry substrate.
BBA Certified.
Manufacturer recommends the use for sacrificial brushes and rollers.

General information

Color	Grey Other Guidance for specification option: Available in any RAL colour.
Finish	Semi-gloss
Material	Epoxy Guidance for specification option: Marine grade epoxy primer. Silicone Guidance for specification option: Silicone polymer top coat. Manufacturer guidance Flexlap - solvent-free silicone coating SWT Primer - marine grade surface primer
Shape	Formless
Length	Bespoke
Width	Bespoke
Height	Bespoke
Warranty description	15 year Guidance for specification option: Product-only warranty: 15 years. Insurance options available up to 12 years.

Uniclass	Ss_40_90_60_85 Special coating systemsPrimary
CAWS	J31/353 Waterproof coating M60/175 Protective coating M60/18 Special coating M60/195 Special coating

Product range	Pitched Roof Protective Coatings

Specification data - Special coating systems

Description	Two-component, liquid, cut edge corrosion treatment for metal roofs.
System manufacturer	Liquasil Ltd.
Preparation	Thoroughly clean surfaces and allow to dry. Guidance for specification option: All loose and flaking material must be removed from the areas to be treated, surface rust may remain in-situ. If existing finishes are delaminating throughout the roof area, all existing factory finish must be removed in a straight line, across the area to be treated, creating a defined line between the existing finish and the cut edge corrosion treatment. Suitable preparation methods include but are not limited to: wire brush, grinders and Quill Falcon Kwikblast system. Surfaces must be completely dry prior to application of the Flexlap silicone component. If an existing cut edge corrosion system is present, consult manufacturer before proceeding.
Initial coats	SWT Corrosion Primer. Guidance for specification option: Two-part epoxy comprising the primer (part A) and the hardener (part B). Rust and wet tolerant for application to all metal fixings such as hook bolts to prevent rust from breaking through the coating. Technical characteristics: Colour: Grey. Solids content: 100%. Recommended film thickness: 100 μm. Heavily rusted or pitted surfaces may require two coats. Coverage: Approximately 40 linear metres/kg at 150 mm band width. Drying time: 6–24 hours. Weight: 1 kg/L. Flash point: >100°C. VOC content: 0 g. Finish: Semi-gloss. Application temperature: -20°C to 40°C.
Finishing coats	FlexLap. Guidance for specification option: Hardened silicone top-coat, which helps to extend the life of the system. Technical characteristics: Composition: Liquid. Odour: Slight. Density: 1.0 (at 20°C). Viscosity: <300 P (at 20°C). Solids content: 100%. Recommended film thickness: 300–500 μm. Coverage: Approximately 12 linear metres/L at 150 mm band width. Drying time: Should be rain free for 2–3 hours. Thoroughly dry after 16 hours. Weight: 0.98 kg/L. Flash point: >32°C. VOC content: 0 g. Finish: Semi-gloss. Application temperature: -5°C to 60°C.

Colour	Goosewing Grey. Guidance for specification option: Standard. RAL. Guidance for specification option: Consult manufacturer and insert requirements. Minimum order quantity 100 L.
Accessories/ Other requirements	Not required. 100 mm wide perforated fleece. Guidance for specification option: 100 mm-wide perforated fleece: Designed to bed into the FlexLap to create a permanent, flexible seal that will withstand foot traffic without breaking. For use when replacing an existing cut edge corrosion treatment or when sheets are severely corroded and in-holed. 150 mm wide perforated fleece. Guidance for specification option: 150 mm-wide perforated fleece: Designed to bed into the FlexLap to create a permanent, flexible seal that will withstand foot traffic without breaking. For use when replacing an existing cut edge corrosion treatment or when sheets are severely corroded and in-holed. Lapsil Sealant. Guidance for specification option: Optional gun-applied high modulus silicone sealant for sealing between overlapping roof sheets. Sealing overlapping roof sheets is not recommended unless this is a specific requirement of the client.

Sustainability data

Contains Red List materials	No
Country of product manufacture	United Kingdom
Material	Epoxy Guidance for specification option: Marine grade epoxy primer. Silicone Guidance for specification option: Silicone polymer top coat. Manufacturer guidance Flexlap - solvent-free silicone coating SWT Primer - marine grade surface primer
Recyclability	Not recyclable. Guidance for specification option: Not recyclable Manufacturer guidance Typically not recyclable.
Recycled content As defined in clause 7.8 of BS EN ISO 14021	0 %