NBS Source
I'm a manufacturer

GBS78-A Triple Glazed Aluminium Clad Timber Lift and Slide Doors

Verified by manufacturer 2 months ago

21 Degrees Third party certifications:
  • Secured By Design

    Secured By Design

    Certificate type

  • UK Conformity Assessed (UKCA)

    UK Conformity Assessed (UKCA)

    Certificate type

  • PAS 24

    Certificate type

Triple glazed aluminium clad timber lift and slide doors with 90 mm sash depth (78 mm timber, 12 mm aluminium cladding).

Jump to:
BOS
+44 (0)1484 461705 Website

Application

Suitable for low energy retrofits and new builds.

Description

Aluminium clad timber lift and slide doors.


The doors have two panes as standard, where usually one pane of the door can slide. Also available to special order is a door where both panes can slide. Supplied with internal handles only as standard, external handles available upon request.


Features and benefits:

  • U value as low as: 0.75 W/m²K.
  • Non-clad doors available (specified separately).
  • Dual compression seals for long term airtightness.
  • Maximum width 2500 mm and maximum height 2450 mm per pane. ( 5000 mm width overall).
  • UKCA marked.
  • All doorsets have integral draught seal(s) all round.
  • All doorsets carry Forest Stewardship Council Chain of Custody certification.
  • Manufactured under independent UKAS approved third party certification.
  • PAS24 certified.
  • Low threshold option.
  • Soft close option available.
  • Sliding door can slide fully behind fixed pane for great aesthetic when open.


For Approved Document Q and Secured By Design requirements, there may be size restrictions. Consult manufacturer for details.

General information

Color

Clear

Beige

Black

Blue

Bronze

Show more

Finish

Satin

Stained

Painted

Powder-coated

Other

Material

Pine

Timber

Aluminium

Composite

Shape

Rectangle

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

Ten year

Uniclass

Pr_30_59_24_80 Sliding door and partition setsPrimary

CAWS

L20/520 Sliding doors

L20/55 Doorsets

Specification data - Sliding door and partition sets

Arrangement

Lift and slide, one fixed pane.

Lift and slide, both panes slide.

Guidance for specification option:

Special order. Consult manufacturer for details and insert requirements.

Door leaves

-

Construction

Timber (Pine), aluminium clad.

Finish and colour

Full factory treatment and finish from Remmers Baustofftechnik to timber.
Full factory powder coating to aluminium cladding.

Guidance for specification option:

Specify interior and exterior finishes separately below.

Operation

Manual.

Hardware

Internal handle.
Siegenia Aubi Portal HS300 lift and slide.

Minimum requirement

High security (Secured by Design).

Guidance for specification option:

Secure configuration 6Tgh.E-18A-6Tgh-16A-E.Lam 6.8 (E – low E coating; A – Argon 90%).

Standard.

Guidance for specification option:

Standard configuration 6Tgh.E-18A-6Tgh-16A-E.Tgh6 (E – low E coating; A – Argon 90%).

Size

-

Manufacturer guidance

Consult manufacturer and insert requirements, maximum size 5500 x 2450 mm.

Glazing

Triple glazed, 52 mm - Toughened.

Triple glazed, 52 mm - Toughened acoustic.

Triple glazed, 52 mm - Toughened + laminated (inner) (middle) (outer).

Triple glazed, 52 mm - Toughened + obscure, pattern.

Triple glazed, 52 mm - Toughened self-cleaning.

Show more

Manufacturer guidance

2 x soft coat low-E, Argon fill 90%.


  • All glass shall be of the required specification to meet safety requirements in accordance with Building Regulations Approved Document K. 
  • All glass shall be suitable to meet anticipated wind loads according to BS6262-3:2005.
  • All glass specified as a barrier or balustrade to protect from falls shall be in accordance with the requirements of Building Regulations Approved Document K and BS6180:2011.
  • All glazing shall be with triple glazed, hermetically sealed units manufactured to BS EN 1279-5:2005+A2:2010 with soft coat low emissivity coatings (ε ≤ 0.05) at positions 2 & 5 as measured from the exterior, Argon fill 90% and warm edge spacers (Ψ ≤ 0.040). U value of standard glazing shall be ≤ 0.55 W/m²K and g value ≥ 50%.


Resistance to wind load

To BS EN 12210, Class C3.

Watertightness

To BS EN 12208, Class 9A.

Air permeability

To BS EN 12207, Class 4.

Air tightness

To BS EN 12207, Class 4 - 600 Pa.

UK exposure category

To BS 6375-1, not less than 1200 Pa.

Thermal

0.79 W/m²K.

Threshold

188 mm.

Guidance for specification option:

Extension options are available: 20, 50 or 90 mm. Consult manufacturer for details and insert requirements.

Depth

210 mm (frame depth - 198 mm timber, 12 mm aluminium cladding);
90 mm (sash depth - 78 mm timber, 12 mm aluminium cladding).

Skirtings/ Sills

Siegenia Aubi Ecopass glass reinforced plastic (GRP) and aluminium.

Spacers

Swisspacer Ultimate warm edge, black.

Door frame

Composite.

Finish

Nature effect.

Painted, RAL classic.

Painted, RAL design.

Painted, NCS1950.

Painted, Farrow and Ball.

Show more

Manufacturer guidance

Internal finish.

External finish

-

Manufacturer guidance

Powder coated aluminium, insert RAL colour requirement.

Gasket

Black.

Handle colour

Matt chrome.

Polished chrome.

Gold.

White.

Black.

Cylinder

Keyed.

Suited keys alike.

Thumb turn.

Sustainability data

Country of material origin

Europe

Country of product manufacture

Europe

Material

Pine

Timber

Aluminium

Composite

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit
-

1

IFC
-

1

Third party certifications

Secured By Design

Secured By Design

Secured By Design

UK Conformity Assessed (UKCA)

UK Conformity Assessed (UKCA)

UKCA Declaration of Conformity

PAS 24

PAS 24

PAS 24

Literature

Windows brochure

Windows brochure